Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED ATTENUATOR; JESD-609 Code: e4; Maximum Input Power (CW): 50 dBm; Minimum Operating Frequency: 0 MHz; Nominal Attenuation: 30 dB; Construction: COAXIAL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RF/Microwave Attenuators 68-30-33 attributes and parameters. Explore more RF/Microwave Attenuators devices from Cobham Plc
Additional Features:
Nominal Attenuation:
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
JESD-609 Code:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
RF or Microwave Device Type:
Terminal Finish:
Maximum Voltage Standing Wave Ratio:
The Cobham Group comprises a number of dynamic businesses in diverse specialist areas, each of which are experts in their field. Together we are a leading global technology and services innovator, highly regarded and respected for providing solutions to the most complex problems in some of the most challenging environments and missions. From the depths of the ocean to deep space and everywhere in between, our customers mission is our mission and every mission matters. Engineers critical, cutting edge data solutions for the most challenging missions on land, sea, and in air and space; with customised solutions across the entire signal chain, including RF, microwave and high reliability microelectronics.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Hitano Enterprise
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
PE43712B-Z
Psemi
PE43712B-Z by Psemi is a RF attenuator with 31 dB attenuation, 23.01 dBm input power, and 2.8 dB insertion loss. Ideal for RF/Microwave applications, it operates from 0.009 MHz to 6000 MHz with a characteristic impedance of 50 ohm. The component has a CMOS technology construction and can handle temperatures from -40°C to 105°C.
32-8
Api Technologies
FIXED ATTENUATOR; Additional Features: SMA, HIGH RELIABILITY; Minimum Operating Temperature: -55 Cel; Maximum Voltage Standing Wave Ratio: 1.35; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz;
59-3-41
Cobham Plc
59-3-41 by Cobham Plc is a RF/Microwave Attenuator with max input power of 50 dBm, VSWR of 1.15, and nominal attenuation of 3 dB. It operates b/w -55 to 100°C, has gold terminal finish, and supports frequencies from 0 to 2500 MHz. Ideal for applications requiring precise signal attenuation in coaxial setups.
HMC653LP2ETR
Hittite Microwave
FIXED ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Package Equivalence Code: SOLCC6,.08,25;
8126
Micronetics
VARIABLE ATTENUATOR; Maximum Operating Temperature: 125 Cel; Minimum Operating Frequency: 6000 MHz; Maximum Operating Frequency: 10000 MHz; Maximum Voltage Standing Wave Ratio: 2; Nominal Attenuation: 63 dB;
2031-2
FIXED ATTENUATOR; Minimum Operating Frequency: 0 MHz; JESD-609 Code: e4; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Operating Temperature: 125 Cel; Nominal Attenuation: 2 dB;
M3933/25-36S
Midwest Microwave
FIXED ATTENUATOR; Additional Features: SMA; Maximum Input Power (CW): 33.01 dBm; Maximum Operating Frequency: 12400 MHz; Construction: COAXIAL; Nominal Attenuation: 10 dB;
HMC939ATCPZ-EP-PT
Analog Devices
Analog Devices' HMC939ATCPZ-EP-PT is a RF attenuator with 31 dB attenuation, 27 dBm CW input power, and 8 dB insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 100 MHz to 33 GHz.
Mercury Systems
VARIABLE ATTENUATOR; Maximum Operating Temperature: 125 Cel; Construction: COAXIAL; Maximum Voltage Standing Wave Ratio: 2; Maximum Operating Frequency: 10000 MHz; Additional Features: SMA;
TGL4203-SM
Triquint Semiconductor
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Package Equivalence Code: LCC16,.12SQ,20; JESD-609 Code: e3/e4;
46-1-34
Cobham Plc's 46-1-34 is a RF/Microwave Attenuator with 1 dB Nominal Attenuation, 43.98 dBm Max Input Power (CW), and 1.3 Max VSWR. Constructed with COAXIAL design, it operates b/w -55 to 125 °C and supports frequencies from 0 to 18000 MHz. Ideal for PANEL MOUNT applications requiring fixed attenuation at a characteristic impedance of 50 ohm.
HMC305ALP4E
Analog Devices' HMC305ALP4E is a RF/Microwave Attenuator with 26.02 dBm CW power, 15.5 dB attenuation, and 2.5 dB insertion loss. Ideal for applications requiring variable attenuation in the frequency range of 700 MHz to 3800 MHz at temperatures from -40°C to 85°C.
3205-1
Aeroflex/weinschel
VARIABLE ATTENUATOR; Maximum Insertion Loss: 3.3 dB; Terminal Finish: Silver (Ag); Additional Features: SMA-F, TTL COMPATIBLE; Maximum Voltage Standing Wave Ratio: 1.35; JESD-609 Code: e4;
HMC470LP3ETR
VARIABLE ATTENUATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Construction: COMPONENT;
56-0
56-0 by Cobham Plc is a fixed attenuator with a max input power of 33.01 dBm and VSWR of 1.25, ideal for RF applications. With a construction of COAXIAL, it operates b/w -55 to 85 °C and covers frequencies from 0 to 26500 MHz. Gold terminal finish ensures high-quality performance in various setups.
44-3
FIXED ATTENUATOR; Maximum Input Power (CW): 36.99 dBm; Construction: COAXIAL; Additional Features: N-F; N-M, I/P POWER-MAX(PEAK)=1000W; Minimum Operating Frequency: 0 MHz; Minimum Operating Temperature: -50 Cel;
HMC-C053
Analog Devices' HMC-C053 is a COAXIAL RF attenuator with 33 dB nominal attenuation and 17.99 dBm CW input power. It operates from -55°C to 85°C, ideal for variable attenuation in RF/Microwave applications up to 2 GHz frequency range.
17-3
FIXED ATTENUATOR; Nominal Attenuation: 3 dB; JESD-609 Code: e4; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -50 Cel; Maximum Voltage Standing Wave Ratio: 1.2;
HMC812LC4RTR
Analog Devices' HMC812LC4RTR is a RF/Microwave Attenuator with 24 terminals, operating temperature range of -40 to 85°C. Made of ceramic, it utilizes GaAs technology and surface mounting feature. Ideal for high-frequency applications in communication systems and radar equipment.
3007-2
3007-2 by Cobham Plc is a COAXIAL VARIABLE ATTENUATOR with 2 dB Nominal Attenuation, 30 dBm Max Input Power (CW), and 1.3 Max VSWR. It operates b/w -40 to 65 °C, suitable for RF/Microwave applications up to 2500 MHz frequency range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved