Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Material: Ferrite; Rated Current: .75 A; Mounting Type: SURFACE MOUNT; Packing Method: BULK;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Data Line Filters HH-1M1608-601JB attributes and parameters. Explore more Data Line Filters devices from Ceratech
Maximum DC Resistance:
Filter Type:
Height:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Width (mm):
HH-1M1608-601JB Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
International Semiconductor
1552200253
Molex
WIRE AND CABLE;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99-7-F
BLM15AG601SN1D
Murata Manufacturing
Murata Manufacturing's BLM15AG601SN1D is a 0402 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.52 ohm, and output impedance of 600 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3 A.
BLM18BD471SN1D
BLM18BD471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
2508056017Y2
Fair-rite Products
Fair-rite Products' 2508056017Y2 is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L2.0XB0.9XH1.25 (mm), it offers a max frequency of 1000 MHz and DC resistance of 0.1 ohm, suitable for surface mount applications in filtering frequencies from 100 MHz to reduce interference.
BKP1608HS391-TV
Taiyo Yuden
Taiyo Yuden's BKP1608HS391-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 390 ohm and max DC resistance of 0.14 ohm. Ideal for data line filtering applications, it operates b/w -55 to 85 °C in surface mount installations.
ILHB0805ER251V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .04 ohm; Rated Current: 3 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2;
W2H15C1038AT1A
KYOCERA AVX
KYOCERA AVX's W2H15C1038AT1A is a 50V data line filter with 4 terminals. Featuring feed through capacitor technology, it has dimensions of L2.01xB1.25xH1.14 mm and is surface mountable. Ideal for applications requiring noise suppression in electronic circuits.
7427512
Wuerth Elektronik & Kg
Wurth Elektronik 7427512 is a chip bead data line filter with 3 functions. It operates b/w -40 to 125°C, has an output impedance of 580Ω, and rated current of 5A. Used in surface mount applications for filtering frequencies from 25-100MHz in electronic circuits.
RB6132-36-0M4
Schaffner Holding Ag
RB6132-36-0M4 by Schaffner Holding Ag is a Data Line Filter with 3 functions, rated voltage of 1000V, and inductance of 420uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0014 ohm. Ideal for applications requiring noise suppression in data lines with UL and IEC approvals.
FBMH1608HM101-T
Taiyo Yuden's FBMH1608HM101-T is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 85°C and DC resistance of 0.035 ohm, it offers effective filtering up to 100 MHz. This surface mount filter measures L1.6xB0.8xH0.8 mm and is suitable for high-speed data transmission systems.
NFE61PT102E1H9L
Murata Manufacturing's NFE61PT102E1H9L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2A rated current. It has one function and three terminals, suitable for applications requiring noise filtering in data lines. Operating temperature ranges from -40°C to 85°C, making it versatile for various electronic devices.
MI0603J680R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
FLTR75V05Z
Abb
FLTR75V05Z by Abb is a 2-function data line filter module with UL, CAN, CSA, VDE, EN approvals. It operates at 75V and 5A with max DC resistance of 0.02 ohm. Ideal for applications requiring filtering in data lines due to its compact dimensions and wide temperature range (-40°C to 100°C).
BLM15HG102SN1D
Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
ACP3225-102-2P-T
Epcos Ag
DATA LINE FILTER; Maximum DC Resistance: .05 ohm; Rated Current: 1.5 A; No. of Functions: 2; Maximum Operating Temperature: 85 Cel; Height: 1.9 mm;
DLP31SN551ML2L
Murata Manufacturing's DLP31SN551ML2L is a data line filter with 2 functions, rated at 16V and 0.1A. It offers an output impedance of 550 ohms and operates b/w -40°C to 85°C. Ideal for applications requiring high insulation resistance and surface mount installation.
MMZ1608Y601BTA00
TDK
TDK's MMZ1608Y601BTA00 is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 mm, it offers an output impedance of 600 ohm and rated current of 0.5 A, ideal for surface mount applications in electronics.
HI1206T500R-10
Laird Technologies
HI1206T500R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -40 to 125 °C, has a DC resistance of 0.01 ohm, and output impedance of 50 OHM. Ideal for applications requiring surface mount filters in the frequency range of 25-1000 MHz.
MMZ1608B601CTDH5
TDK's MMZ1608B601CTDH5 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 600 ohms, it is ideal for automotive applications due to its AEC-Q200 screening level.
PA3747.905NL
Pulse Electronics
PA3747.905NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It operates b/w -40 to 125 °C and has an inductance of 6030 uH. Ideal for applications requiring high output impedance and rated current of 1.45 A.
MPZ1608D101BTA00
TDK's MPZ1608D101BTA00 is a 0603 chip bead filter with 2 terminals. With a max temp of 125°C and min of -55°C, it offers low DC resistance of 0.15 ohm. Ideal for data line filtering applications at frequencies ranging from 100 MHz, providing an output impedance of 100 OHM.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Ceratech
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved