Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: SPDT; Type (Actuator): BAT TYPE; Switch Action: MOMENTARY; Electrical Life: 25000 Cycle(s);
Median Price
$14.313
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
$16.240
100+ parts
$12.130
1k+ parts
$11.270
10k+ parts
-
Master Electronics
$10.740
$9.360
Verical
$13.247
R&J Components
Q Components
Toggle Switches 6FC53-73 attributes and parameters. Explore more Toggle Switches devices from Carling Technologies
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Electrical Life:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
6FC53-73 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.40
SB
There are few products that Carling Technologies hasn't turned "ON" and fewer industries that haven't turned to Carling for solutions. With ISO9001 and IATF 16949 registered manufacturing facilities and technical sales offices worldwide, Carling ranks among the world's largest manufacturers of circuit breakers, switches, power distribution units, digital switching systems and electronic controls. Business Acquisition November 30, 2021 Littelfuse, Inc. (NASDAQ: LFUS), an industrial technology manufacturing company empowering a sustainable, connected, and safer world, announced the completion of its acquisition of Carling Technologies, Inc.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1210C104K5RACTU
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
General Semiconductor
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
B15AV
Nkk Switches
B15AV toggle switch by Nkk Switches features a SPDT switch function with gold end contact plating. With an electrical life of 50,000 cycles and insulation resistance of 500M ohm, it is ideal for applications requiring a DC max power rating of 0.4VA at 28VDC. The switch operates in temperatures ranging from -30°C to 85°C and has a dielectric withstand voltage of 500VAC, making it suitable for various electronic devices.
7691K14
Eaton Corporation
The Eaton Corporation 7691K14 Toggle Switch features a body width of 19.05in and a max AC contact current of 15A@125VAC. With a switch function of 4PST, it is ideal for panel mount-threaded applications requiring latched switch action.
M2023SS1W01
M2023SS1W01 by Nkk Switches is a DPDT toggle switch with STAINLESS STEEL housing. It has 25,000 cycles electrical life and can handle 6A@125VAC AC max rating. Ideal for applications requiring a corrosion-proof, latched switch with gold over nickel/silver terminal finish.
112TW1-10
Honeywell Sensing And Control
112TW1-10 by Honeywell is a DPDT toggle switch with sealing for dust and water proofing. It has a max AC contact current of 5A@125VAC and DC contact current of 5A@28VDC. Ideal for applications requiring a latched switch function, such as panel-mounted threaded installations.
8860K5
The Eaton Corporation 8860K5 Toggle Switch features SP3T switch function, 19.05" body width, and 30.48mm body height. With a max AC contact current of 11A@115VAC, it is ideal for panel mount-threaded applications requiring latched and momentary switch action at temperatures ranging from -18°C to 66°C.
26ET59-T
The Honeywell Sensing And Control 26ET59-T is a DPDT toggle switch with corrosion-proof sealing. It has a max DC contact voltage of 28V and can handle up to 4A@28VDC. Ideal for panel mounting applications, this lever-actuated switch offers latched switch action and requires an operating force of 22.24N.
101TL2-6
The Honeywell Sensing And Control 101TL2-6 Toggle Switch is a SPST type with dust and water-proof sealing. It has a max AC contact current of 7.5A@115VAC and DC contact voltage of 30V, suitable for panel mount-threaded applications in various industries.
6FC54-73
Carling Technologies
The Carling Technologies 6FC54-73 is a SPDT toggle switch with electrical life of 25k cycles. It has a max AC contact current of 15A@125VAC and operates b/w -18°C to 66°C. Ideal for panel mounting applications, this BAT TYPE actuator switch offers momentary action with screw termination.
4NT1-3
4NT1-3 by Honeywell Sensing And Control is a 4PDT toggle switch with IP67/IP68 sealing. It has a max AC contact current of 15A@277VAC and operates at temperatures up to 71°C. Ideal for panel mounting applications, it features a standard lever actuator and screw termination type.
2FB53-73/TABS
Carling Technologies 2FB53-73/TABS toggle switch has SPDT function with 50000 cycles electrical life. Insulation resistance is 100MΩ, suitable for applications requiring ON-ON contact function. With AC max rating of 15A@125VAC, it's ideal for panel mount-threaded installations in various equipment.
1TL1-3G
1TL1-3G by Honeywell Sensing And Control is a dust-proof toggle switch with SPDT function. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for panel mount applications, this switch features locking lever actuator and gold-plated contacts for reliable performance in temperatures ranging from -65 to 71 °C.
MS24658-22D
The Eaton Corporation MS24658-22D is a SPST toggle switch with 20000 cycles electrical life. It has a body width of 16.13in and sealing for environmental protection. With a max AC contact current of 15A, it is ideal for panel mounting applications in environments with temperatures ranging from -65°C to 71°C.
102TL1-3
102TL1-3 by Honeywell is a dust-proof toggle switch with SPDT function. It has a max AC contact current of 15A@125VAC and DC contact current of 20A@28VDC. Ideal for panel mounting applications, this switch features a lever actuator and latched switch action.
2TL1-12
2TL1-12 by Honeywell Sensing And Control is a SPDT toggle switch with a body width of 22.6in and sealing for dust and water proofing. It has a max operating temperature of 71°C, AC contact current of 15A, and DC contact voltage of 28V. Ideal for applications requiring a latched switch function, it features a lever actuator type and screw termination, suitable for panel mount-threaded installations.
MS24524-23
Safran Group
TOGGLE SWITCH; Mounting Feature: PANEL MOUNT-THREADED; Switch Function: DPDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Length (Bushing): .47 inch;
7561K6
The Eaton Corporation 7561K6 Toggle Switch features DPST switch function, 15A@125VAC AC max rating R load, and quick connect termination type. With a body width of 19.05 inch and panel mount-threaded mounting feature, it is ideal for industrial applications requiring reliable switching capabilities.
6GO53-73/TABS
6GO53-73/TABS by Carling Technologies is a DPDT toggle switch with 25000 cycles electrical life. It has an insulation resistance of 100MΩ and can handle up to 10A@250VAC. Ideal for panel mounting applications, this switch operates b/w 0-85°C temperatures.
7301SYCQE
C & K Components
TOGGLE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: 3PDT; Type (Actuator): TOGGLE; Contact Function: ON-ON; Solderability: MIL-STD;
2NT1-6
2NT1-6 by Honeywell Sensing And Control is a SPST toggle switch with a body width of 22.61 inch and sealing for dust proof protection. It has a max AC contact current of 10A@277VAC, making it suitable for panel mount applications requiring momentary switch action at temperatures up to 71°C.
7201MD9AV2QE
Itt Cannon
7201MD9AV2QE by ITT Cannon is a DPDT toggle switch with SILVER plating, suitable for applications requiring ON-ON contact function. With a max AC voltage of 250V and DC current of 5A, it features STAINLESS STEEL housing, COPPER ALLOY terminals, and GLASS FILLED NYLON insulator material. Ideal for use in environments with temperatures ranging from -30 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved