Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MP725-1.00K-1% by Caddock Electronics is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 25 W power dissipation. It is used in surface mount technology applications due to its metal glaze/thick film technology and gull wing terminal shape. Operating temperature ranges from -55°C to 150°C.
Median Price
$6.920
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Newark
1+ parts
$6.730
100+ parts
$4.620
1k+ parts
$4.380
10k+ parts
-
RS Americas
$6.770
$5.750
DigiKey
$4.697
Mouser Electronics
$4.700
$4.310
Farnell
$7.310
$3.940
$3.610
Verical
Nova Conductors
$3.969
Freelance Electronics
$6.850
$7.192
$6.782
Bristol Electronics
$7.410
$3.483
Vyrian
Resion
Continental Prestige Electronics
$3.889
Argo Parts USA
Netroflash
$3.770
$3.691
Perfect Parts
The rated temperature of 25°C ensures stable performance of the resistor in normal operating conditions.
Metal glaze/thick film technology provides high reliability and stability, making this resistor suitable for various applications.
With a resistance value of 1000 ohms, this resistor can effectively control current in the circuit.
The low temperature coefficient of -20,80 ppm/°C ensures minimal resistance changes with temperature variations, maintaining circuit accuracy.
With a rated power dissipation of 25 watts, this resistor can handle high power loads effectively.
Fixed Resistors MP725-1.00K-1% attributes and parameters. Explore more Fixed Resistors devices from Caddock Electronics
Additional Features:
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
MP725-1.00K-1% Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Caddock Electronics, Inc. manufactures precision resistors and resistor networks. Caddock uses unique resistance film technologies and process technologies to create solutions for performance demanding applications. The product line consists of over 250 models, including high voltage resistors, current sense resistors, chip resistors, high frequency resistors, rf resistors, load resistors, pulse resistors, and non-inductive power resistors. Custom resistors and resistor network solutions are also available.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
CRCW0603499RFKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW0603499RFKEA is a 499 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.1 W and operating voltage of 75 V, it operates b/w -55°C to 155°C. Ideal for use in automotive electronics due to AEC-Q200 reference standard compliance.
RC0402FR-07200RL
Yageo
Yageo's RC0402FR-07200RL is a fixed resistor with 200 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 50 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RC0805JR-130RL
Yageo's RC0805JR-130RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Featuring metal glaze/thick film tech, it's ideal for jumper applications in electronics requiring a compact 0.125 W power dissipation solution.
CRCW04024K75FKEDC
Vishay Intertechnology's CRCW04024K75FKEDC is a fixed resistor with 4750 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
CRCW040215K0FKED
Vishay Intertechnology's CRCW040215K0FKED is a fixed resistor with 15000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 50 V.
Y14870R10000B9R
Vishay Foil Resistors
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 170 Cel; Tolerance: .1 %;
RC0603FR-07560RL
Yageo's RC0603FR-07560RL is a 560 ohm SMT fixed resistor with 1% tolerance and 0.1W power dissipation. It operates b/w -55 to 155 °C, making it ideal for temperature-sensitive applications. The metal glaze/thick film technology and wraparound terminal shape ensure reliable performance in various electronic circuits.
CRCW0402100RFKEDHP
Vishay Intertechnology's CRCW0402100RFKEDHP is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.2 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 50 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RC0402FR-07470RL
Yageo's RC0402FR-07470RL is a 470 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.0625 W and operating voltage of 50 V, it operates b/w -55 to 155 °C. Its metal glaze/thick film technology and compact SMT package make it ideal for various electronic circuits.
CRCW2512100KFKEG
Vishay Intertechnology's CRCW2512100KFKEG is a 100000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 1 W. Ideal for surface mount applications in various electronic circuits requiring precise resistance values.
CR0805-FX-1001ELF
Bourns
Bourns CR0805-FX-1001ELF is a 1000 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Ideal for compact electronic devices requiring precise resistance values in a small SMT package.
RC0603JR-071K5L
Yageo's RC0603JR-071K5L is a fixed resistor with 1500 ohm resistance, 5% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in electronics requiring precise resistance values.
MCT06030C4701FP500
Vishay Intertechnology's MCT06030C4701FP500 is a 4700 ohm, 1% tolerance fixed resistor with thin film technology. Operating voltage of 75V and rated power dissipation of 0.1W make it suitable for surface mount applications in various electronic circuits. With a temperature coefficient of 50 ppm/°C, it can operate b/w -55 to 125 °C, meeting CECC40401-801 standards.
CRCW06031K50FKEA
Vishay Intertechnology's CRCW06031K50FKEA is a fixed resistor with 1500 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
RC0603FR-072K7L
Yageo's RC0603FR-072K7L is a fixed resistor with 2700 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
PCF0805R-820KBT1
Tt Electronics Plc
PCF0805R-820KBT1 by Tt Electronics Plc is a SMT fixed resistor with 820k ohm resistance, 0.1% tolerance, and 0.1W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values at temperatures ranging from -55 to 125 °C.
TNPW0603100KBEEA
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 125 Cel; Tolerance: .1 %;
RC0603FR-072M2L
Yageo's RC0603FR-072M2L is a SMT fixed resistor with 2200000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial controls.
CPF0603B10KE1
TE Connectivity
TE Connectivity's CPF0603B10KE1 is a 10000 ohm fixed resistor with 0.1% tolerance and 0.063 W power dissipation. It features thin film technology, operates b/w -55 to 155 °C, and has a temperature coefficient of 25 ppm/°C. Ideal for surface mount applications in electronics requiring precise resistance values.
CRCW080510R0FKTA
Vishay Intertechnology's CRCW080510R0FKTA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 150 V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MP725-100-1%
Caddock Electronics
MP725-100-1% by Caddock Electronics is a 100 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 150 °C and has a power dissipation of 25 W. Ideal for surface mount applications in various electronic circuits.
MP725-10.0-1%
Caddock Electronics' MP725-10.0-1% is a 10 ohm SMT fixed resistor with -55 to 150 °C operating range and 1% tolerance. Ideal for high-power applications, it offers 25 W power dissipation in a compact rectangular package suitable for surface mount technology.
MP725-1.00-1%
Caddock Electronics' MP725-1.00-1% is a 1 ohm fixed resistor with METAL GLAZE/THICK FILM tech, rated for -55 to 150 °C. Ideal for SMT applications, it has a power dissipation of 25W and operates at 200V, making it suitable for various electronic circuits.
MP725-5.00-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 5 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-500-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-50.0-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-0.10-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: .1 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-300-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 300 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-3.00-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-30.0-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 30 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-7.50-1%
MP725-7.50-1% by Caddock Electronics is a fixed resistor with a resistance of 7.5 ohm and a tolerance of 1%. It is designed for surface mount applications and can operate at temperatures ranging from -55 to 150 °C.
MP725-75.0-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 75 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-750-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 750 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-2.00-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-200-1%
MP725-200-1% by Caddock Electronics is a 200 ohm SMT fixed resistor with 1% tolerance, rated for 25W power dissipation. Ideal for surface mount applications, it operates b/w -55 to 150 °C and has a temperature coefficient of -20,80 ppm/°C.
MP725-20.0-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-33.0-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 33 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-330-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 330 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-3.30-1%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3.3 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
MP725-1.00K-5%
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved