Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER, LOW FORCE; AC Maximum Rating R Load (Contact): 1A@125VAC; Termination Type: QUICK CONNECT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Aztec Data Supply Inc.
$3.330
Advanced Electronics
$5.465
$4.973
$4.481
AZTECH Wire
$11.240
$10.790
$10.580
$10.370
Semicontronic
$20.100
$19.598
$19.497
Continental Prestige Electronics
Bastille Electronics
Argo Parts USA
Snap Action & Limit Switches TMCFF5SA2040Y attributes and parameters. Explore more Snap Action & Limit Switches devices from C & K Components
Length (Actuator):
Material (Actuator):
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Dielectric Withstand Volts (V):
Electrical Life:
Insulation Resistance:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
TMCFF5SA2040Y Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
C&K is now a part of Littelfuse, Inc. Since its formation in 1928, C&K has been at the forefront of technological evolution in electromechanical switches. The company’s unmatched design capabilities tailored to customer needs are recognized globally by design engineers who demand high-quality switch performance. Nearly a century later, C&K remains one of the most recognizable and trusted names in the e-mech switch industry. C&K has headquarters in Waltham, Massachusetts (United States) and global design centers at its HQ location alongside Dole (France) and Huizhou (China). Used in automotive, industrial, medical and consumer products, among other applications, C&K products – including tactile, rocker and toggle switches – are assembled in over 55,000 standard products and 8.5 million switch combinations to companies that design, manufacture and distribute electronics products. So whether you’re interested in a universal paddle switch assembly for a fire alarm, a compact start/stop button for a boating application, a switching mechanism for a surgical device with a specific actuation force, or a tailor-made multi-position snap-switch module for temperature adjustment, you can count on C&K to deliver the best possible solution every time.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Cheng-yi Electronic
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1554216004
Molex
WIRE AND CABLE;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Instrument
914CE3-3AK
Honeywell Sensing And Control
The Honeywell Sensing And Control 914CE3-3AK is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a steel roller actuator, it has 4.8mm travel and 12.01N operating force. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
D2F-01L2-D
Omron
Omron's D2F-01L2-D is a SPDT snap action/limit switch with 30VDC contact voltage and 1.47N operating force. With IP40 sealing, it has an electrical life of 30000 cycles and operates b/w -25°C to 65°C. Ideal for panel mounting applications requiring momentary switch action with solder termination.
SS-10GL13
Omron SS-10GL13 is a SPDT snap action/limit switch with 50000 cycles electrical life. It has IP40 sealing, 100000000 ohm insulation resistance, and operates b/w -25 to 85 °C. Ideal for applications requiring momentary switch action, it features a simulated roller lever actuator with 2mm travel and can handle up to 10.1A@125VAC or 14VDC.
1EN51-6B
1EN51-6B by Honeywell is a corrosion-proof SPDT snap action/limit switch with a steel plunger. It has a max DC contact voltage of 28V and can handle up to 4A@28VDC. Ideal for panel mounting applications, it offers momentary switch action with an actuator travel of 7.37mm and max operating force of 26.69N.
9007AO1S1
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
311SM604-H4
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SM;
XCG5Z1
Johnson Electric Group
Snap Acting/Limit Switches;
SS-5GL2-3T
D2F-01-D3
Omron's D2F-01-D3 snap action switch has a 30,000 cycle electrical life and operates b/w -25°C to 65°C. With SPDT switch function, it offers a max DC contact voltage of 30V and max operating force of 1.47N. Ideal for panel mounting applications requiring momentary switch action with IP40 sealing.
GLCC03A2B
GLCC03A2B by Honeywell Sensing And Control is a SPDT snap action/limit switch with IP67 sealing. It operates b/w -40 to 85 °C, handling up to 10A@300VAC or 10A@250VDC. Ideal for applications requiring a side rotary actuator and momentary switch action.
LCGHF5A10LC
C & K Components
LCGHF5A10LC by C & K Components is a SPDT snap action/limit switch with 6000 cycles electrical life. Featuring copper alloy terminals, it has a max operating force of 0.56N and operates at temperatures ranging from -25 to 85°C. Ideal for applications requiring high force actuation such as industrial machinery and automation systems.
GLLA01A2B
GLLA01A2B by Honeywell Sensing And Control is a SPDT snap acting/limit switch with IP66 sealing. It has a max operating temperature of 80°C and can handle up to 10A@300VAC. Ideal for panel mounting applications requiring a durable switch with roller type actuator.
TMCGF5ST1540Y
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER, HIGH FORCE; Material (Actuator): THERMOPLASTIC; Insulation Resistance: 1000000000 ohm;
444EN1-6
The Honeywell 444EN1-6 is a corrosion-proof SPDT snap action/limit switch with a steel shaft actuator. It has a max DC contact voltage of 28V and can handle up to 7A@28VDC. Ideal for panel mounting applications, this switch offers momentary switch action and wire termination.
311SX2-T
311SX2-T by Honeywell is a SPDT snap action/limit switch with 5A@115VAC AC rating. It has a body width of 5.08in, height of 8.89mm, and operates at max temp of 121°C. Ideal for panel mounting applications requiring momentary switch action with wire termination.
D3M-01K1-3
Omron's D3M-01K1-3 Snap Action & Limit Switch offers 200000 cycles Electrical Life, SPST Switch Function, and 7" Body Width. Ideal for panel mounting applications with a sealing rating of IP00, it operates b/w -25°C to 85°C temperatures and has a max DC contact voltage of 30V.
BZ-RW9223312
BZ-RW9223312 by Honeywell is a SPDT snap action/limit switch with 10A@480VAC AC contact rating. It has a body width of 17.45 inch, height of 26.42 mm, and actuator travel of 2.92 mm. Ideal for panel mounting applications requiring momentary switch action with max operating force of 3.34 N.
BZ-2RQ784
BZ-2RQ784 by Honeywell is a 17.45" wide snap action/limit switch with SPDT function, corrosion-proof sealing, and steel roller actuator. It has a max AC contact current of 15A@480VAC and operating force of 3.61N. Ideal for panel mounting applications requiring momentary switch action.
D3V-162-1A5
Omron D3V-162-1A5 is a SPDT snap acting/limit switch with 100000 cycles electrical life. It has a max AC contact current of 16A@250VAC and operates b/w -25°C to 105°C. Ideal for panel mounting applications, it features a hinge lever actuator with 5.6mm travel and IP00 sealing.
D4NL-2DFA-B4
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TMCFF5SA2040Y
ITT Cannon
TMCFF5SA2040Y by ITT Cannon is a snap action/limit switch with a body width of 10.2in and a body height of 15.7mm. It has a max operating temperature of 150°C and is commonly used for panel mounting applications.
TMCFF5SP0040Y
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Length (Actuator): .11 inch; DC Maximum Rating R Load (Contact): 1A@30VDC;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): PIN PLUNGER; Maximum AC Contact Current: 1 A; Switch Action: MOMENTARY;
TMCFF5SA1040C
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER ROLLER HIGH FORCE; Actuator Travel (mm): 2.67; Manufacturer Series: TM;
TMCFF5SA1040Y
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER HIGH FORCE; Maximum DC Contact Voltage: 30 V; DC Maximum Rating R Load (Contact): 1A@30VDC;
TMCFF5SA1540Y
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER HIGH FORCE; Maximum DC Contact Voltage: 30 V; Maximum AC Contact Current: 1 A;
TMCFF5SA2040C
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER ROLLER, LOW FORCE; Maximum DC Contact Current: 1 A; DC Maximum Rating R Load (Contact): 1A@30VDC;
TMCFF5SA2040W
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER, LOW FORCE; Maximum Operating Force: .49 N; Electrical Life: 150000 Cycle(s);
TMCFF5SA2540C
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER ROLLER, LOW FORCE; Maximum AC Contact Voltage: 125 V; Switch Action: MOMENTARY;
TMCFF5SA2540W
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER, LOW FORCE; Actuator Travel (mm): 11.1; Body Width: 10.2 inch;
TMCFF5SA2540Y
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER, LOW FORCE; Actuator Travel (mm): 11.1; Maximum Operating Temperature: 150 Cel;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER ROLLER HIGH FORCE; Maximum DC Contact Voltage: 30 V; Maximum AC Contact Current: 1 A;
TMCFF5SA1040W
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER HIGH FORCE; Body Length/Diameter: 27.7 mm; Switch Action: MOMENTARY;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER HIGH FORCE; Maximum Operating Force: .59 N; Minimum Operating Temperature: -55 Cel;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER HIGH FORCE; Maximum Operating Temperature: 150 Cel; Maximum DC Contact Current: 1 A;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER ROLLER, LOW FORCE; AC Maximum Rating R Load (Contact): 1A@125VAC; Actuator Travel (mm): 5.08;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER, LOW FORCE; DC Maximum Rating R Load (Contact): 1A@30VDC; Minimum Operating Temperature: -55 Cel;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): LEVER ROLLER, LOW FORCE; AC Maximum Rating R Load (Contact): 1A@125VAC; Body Length/Diameter: 27.7 mm;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER, LOW FORCE; Maximum Operating Force: .15 N; Manufacturer Series: TM;
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): LEVER ROLLER, LOW FORCE; Manufacturer Series: TM; Body Height: 15.7 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved