Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Finish: MATTE TIN OVER NICKEL;
Median Price
$7.195
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Arrow
1+ parts
$6.116
100+ parts
$4.943
1k+ parts
$4.644
10k+ parts
-
Farnell
$6.510
$5.890
Sager
$7.160
$6.430
Sager Power Systems
$7.230
$6.550
Mouser Electronics
$8.490
$7.700
$7.290
DigiKey
$8.610
$7.787
$7.425
Element14
$11.750
$10.660
$9.980
TTI Europe
$5.521
$4.386
RS (Exports)
$7.965
$7.248
$7.009
Verical
$7.267
$6.346
Future Electronics
$6.400
Avnet
$6.358
$6.000
Greenchips
$4.654
$4.432
$4.221
$3.809
Nova Conductors
$6.860
TME
$7.670
$5.530
$4.420
Vyrian
SIE Connect GmbH - GreenChips
ComSIT Distribution GmbH
IBS Electronics
$5.457
$5.358
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Legend Electronics Inc.
Semicontronic
$4.690
$4.573
$4.549
Corohmni
$6.790
Netroflash
$6.517
$6.380
Continental Prestige Electronics
$7.810
Perfect Parts
Eastek
Authorized Procurement Solutions
Abacus Technologies
iodParts Technologies Inc.
GreenTree Electronics
Glotronic Ltd.
ChipstoGo Electronic ltd
Power Supply Modules NME0512SC attributes and parameters. Explore more Power Supply Modules devices from C&d Technologies
Additional Features:
Other IC type:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Voltage:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Total Power Output:
Trim or Adjustable Output (V):
Width (mm):
NME0512SC Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - NME, NML Series Logo 16/May/2016
C&D leads the innovation and delivery of energy storage solutions to power the world safely and sustainably. We have been delivering world-class power solutions for mission-critical industrial applications for more than 100 years, manufacturing and supporting innovative systems for the conversion and storage of electrical power. As a global leader in energy storage solutions and services for the telecommunications, utility, uninterruptible power supply, cable, broadband and renewable energy markets, C&D is committed to providing high-quality, reliable, cost-effective power storage products and services to our customers. With the 2019 acquisition of Trojan Battery Company, a leading manufacturer of deep-cycle batteries for motive applications, C&D created one of the largest energy storage solution providers in the world. Together, the ability to handle all aspects of industrial energy storage, including battery installation, maintenance and recycling is greatly enhanced. As trusted power solutions partners, C&D and Trojan will continue to innovate and develop new technologies aimed at powering the future.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
1554216002
Molex
WIRE AND CABLE;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Space Power Electronics
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
6EP1437-2BA20
Siemens
Siemens 6EP1437-2BA20 is a power supply module with trimmable output voltage (24-28V) and 960W total power output. It operates in temperatures from -25 to 70°C, suitable for AC-DC regulated power applications. With 1 output and 11 terminals, it's ideal for microelectronic assemblies requiring precise voltage control.
TVN5-2411WI
Traco Electronic Ag
TVN5-2411WI by Traco Electronic Ag is a DC-DC regulated power supply module with a max output current of 1A and a max total power output of 5W. It has an adjustable output voltage and can operate in temperatures ranging from -40°C to 90°C. This module is commonly used in various applications requiring reliable power supply solutions.
I6A4W020A033V-005-R
Tdk-lambda
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 11; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO;
THN20-2411WIR
Traco Electronic Ag's THN20-2411WIR power supply module offers adjustable output voltage, 89% efficiency, and 4A max output current. With a compact design (25.4mm x 25.4mm x 9.9mm), it is ideal for applications requiring reliable power in temperatures ranging from -40°C to 85°C.
MAP110-4004CG
Bel Fuse
Power Supply Modules;
TEN8-2423WI
TEN8-2423WI by Traco Electronic Ag is a DC-DC regulated power supply module with 86% efficiency. It has dual terminals, operates in industrial temperature grade (-40 to 85 °C), and offers 15V output voltage at 8W total power output. Ideal for microelectronic assemblies requiring stable power delivery.
DPP240-24-1
AC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: XFM; Package Shape: RECTANGULAR; Surface Mount: NO;
PTH05050WAH
The Texas Instruments PTH05050WAH is a voltage-mode controlled DC-DC regulated power supply module with an adjustable output voltage range from 0.8V to 3.6V and a max output current of 6A. With high efficiency at 95%, it is suitable for industrial applications requiring reliable power conversion in compact spaces, featuring UL, CSA, and IEC approvals for safety compliance.
NFM-05-15
Mean Well Enterprises
AC-DC REGULATED POWER SUPPLY MODULE; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
MDR40-24
Astrodyne Tdi
Astrodyne Tdi's MDR40-24 power supply module offers 88% efficiency, 1.7A output current, and 40.8W total power output. With approvals from CB, CE, TUV, and UL, it is ideal for voltage-mode control applications requiring a min output voltage of 24V in a compact rectangular package.
RPM3.3-6.0
Recom Power
RPM3.3-6.0 by Recom Power is a 19.8W DC-DC regulated power supply module with 97% efficiency, adjustable output (0.9-6V), and EN approvals. Ideal for industrial applications requiring a compact (12.19mm x 12.19mm) and efficient power solution with thermal, overvoltage, and short circuit protection features.
TDR-480-24
AC-DC POWER FACTOR CORRECTION MODULE; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
R-78E5.0-0.5
R-78E5.0-0.5 by Recom Power is a DC-DC regulated power supply module with 3 terminals and a max output current of 0.5A. It operates b/w -40 to 70°C, providing an output voltage range of 4.85V to 5.15V, making it ideal for applications requiring a compact and efficient power solution in various industries.
PTH12050WAZ
PTH12050WAZ by Texas Instruments is a DC-DC regulated power supply module with an adjustable output voltage range of 1.2V to 5.5V and a max output current of 6A. It operates in voltage-mode control, has an efficiency of 84%, and offers protection against output overcurrent and thermal issues. Ideal for industrial applications requiring reliable power conversion within a temperature range of -40°C to 85°C.
MGJ2D241505SC
Murata Manufacturing
Murata MGJ2D241505SC is a 2W DC-DC regulated power supply module with 15V output voltage and 24V input voltage. It has a max load regulation of 7% and operates in industrial temperature grade range (-40 to 100°C). Ideal for applications requiring reliable power conversion in compact spaces.
KHHD006A0A41Z
Ge Industrial Solutions
DC-DC REGULATED POWER SUPPLY MODULE;
NDR-75-24
Mean Well Enterprises NDR-75-24 power supply module offers 88% efficiency with a max output current of 3.2A at 24V. It features adjustable output voltage, overvoltage protection, and operates in temperatures ranging from -20 to 70°C. Ideal for applications requiring reliable and regulated power supply solutions.
GST280A24-C6P
AC-DC POWER FACTOR CORRECTION MODULE;
TCL024-124DC
TCL024-124DC by Traco Electronic Ag is a DC-DC regulated power supply module with an output voltage range of 24-28V and max current of 1A. With high efficiency at 86%, it's ideal for applications requiring stable power in compact spaces, thanks to its microelectronic assembly package style. Operating temperatures from -25°C to 50°C make it versatile for various environments.
B0505S-1WR3
Mornsun Guangzhou Science & Technology
B0505S-1WR3 by Mornsun is a 1W DC-DC unregulated power supply module with a nominal input voltage of 5V. It operates in industrial temperatures (-40 to 85°C) and has a max load regulation of 15%. With a compact rectangular package style, it's ideal for applications requiring reliable power conversion in tight spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NME0505DC
Murata Manufacturing's NME0505DC is a 1W DC-DC unregulated power supply module with 69% efficiency. It operates in industrial temperatures (-40 to 85°C) and has a max output current of 0.2A at 5V. Ideal for microelectronic assemblies, this module offers voltage-mode control and UL approval.
C&d Technologies
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Output Voltage: 5 V;
NME0509SC
Murata Manufacturing's NME0509SC is a 1W DC-DC unregulated power supply module with 77% efficiency. It operates in industrial temperatures (-40 to 85°C) and has a nominal input voltage of 5V, outputting at 9V. With UL approval, it is ideal for microelectronic applications requiring compact power solutions.
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Total Power Output: 1 W;
NME0505SC
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Seated Height: 10.25 mm;
Murata Manufacturing's NME0505SC is a DC-DC regulated power supply module with 4 terminals, operating b/w -40 to 85°C. It offers a max output current of 0.2A and load regulation of 15%, suitable for industrial applications requiring a nominal input voltage of 5V and total power output of 1W.
NME0505D
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Newport Components
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Input Voltage: 4.5 V;
NME0505DPC
DC-DC UNREGULATED POWER SUPPLY MODULE; No. of Terminals: 4; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Input Voltage: 4.5 V;
NME0512SC
DC-DC UNREGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Code: SMA; Package Shape: RECTANGULAR; Surface Mount: NO;
NME0512D
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
NME0512S
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Input Voltage: 5.5 V;
NME0515S
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Operating Temperature: -40 Cel;
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Code: SIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NME0515D
NME0512DC
DC-DC UNREGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Code: DMA; Package Shape: RECTANGULAR; Surface Mount: NO;
NME0515SC
DC-DC REGULATED POWER SUPPLY MODULE; Temperature Grade: INDUSTRIAL; No. of Terminals: 4; Package Shape: RECTANGULAR; Surface Mount: NO; Width (mm): 9.8 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved