Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: CHASSIS MOUNT; Minimum Control Voltage: 0 V; Maximum Control Voltage: 10 V; Minimum Supply Voltage: 7.8 V; Maximum Supply Voltage: 8.2 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Decca Corp
$23.000
$22.540
$22.315
Supply Digital
Corphita
VCO Voltage Controlled Oscillators VTO-1990-SMA attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from Broadcom
Maximum Control Voltage:
Minimum Control Voltage:
Modulation Sensitivity:
Mounting Feature:
Offset Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Power:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
VTO-1990-SMA Oscillators trade compliance attributes, and parameters.
ECCN
3A992.A
ECCN Governance
EAR
HTS
8542.39.00.01
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
International Semiconductor
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
HMC529LP5
Analog Devices
Analog Devices' HMC529LP5 is a VCO with 32 terminals, operating from 12.4 to 13.4 GHz. It features -110 dBc/Hz phase noise, 4 dBm output power, and supports control voltages from 2V to 13V. Ideal for applications requiring precise frequency control in RF systems.
V600ME10-LF
Z-communications
V600ME10-LF by Z-communications is a VCO with Mod Sensitivity of 108 MHz/V, Output Power of 8 dBm, and Phase Noise at -89 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 1600-3200 MHz, such as wireless communication systems or radar equipment.
VTO-4301-K
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: CHASSIS MOUNT; Offset Frequency: 100 kHz; Minimum Operating Temperature: 0 Cel; Output Power: 3 dBm; Minimum Control Voltage: 0 V;
HMC510LP5TR
Analog Devices' HMC510LP5TR is a VCO with 10 dBm output power, -116 dBc/Hz phase noise, and operates b/w 8450-9550 MHz. It has a max supply voltage of 5.25V and current of 360mA. Ideal for applications requiring precise frequency control in compact designs.
ADF5510BCPZ-U3
ADF5510BCPZ-U3 by Analog Devices is a VCO with 32 terminals, operating at frequencies from 8450 MHz to 9650 MHz. It uses bipolar technology and requires power supplies of 3V to 5V. This voltage-controlled oscillator is ideal for applications requiring precise frequency control in temperature ranges from -40°C to 85°C.
HMC1168LP5E
Analog Devices' HMC1168LP5E VCO offers 350 MHz/V modulation sensitivity, -85 dBc/Hz phase noise, and 10 dBm output power. Ideal for applications requiring precise frequency control in the range of 12.47-13.72 GHz, with a compact size of 5.1mm x 5.1mm x 1.0mm for surface mount installations.
LTC6992IS6-4#TRPBF
LTC6992IS6-4#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a supply voltage range of 2.25V to 5.5V and consumes only 0.45mA max current, making it ideal for applications requiring precise voltage-controlled oscillation in compact designs.
HMC632LP5ETR
Analog Devices' HMC632LP5ETR is a VCO with 5.25V max supply voltage, 400mA max supply current, and 4dBm output power. Ideal for applications requiring precise frequency control in the range of 14.25-15.65GHz, such as radar systems and communication equipment.
SN74LS626DR
Texas Instruments
SN74LS626DR by Texas Instruments is a VCO with 16 terminals, operating at 20MHz frequency. It has a supply voltage range of 4.75V to 5.25V and consumes up to 55mA current. Ideal for applications requiring precise voltage-controlled oscillation in temperature-sensitive environments.
HMC533LP4ETR
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Phase Noise: -95 dBc/Hz; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 23800 MHz;
HMC1168LP5ETR
Analog Devices' HMC1168LP5ETR is a VCO with 10 dBm output power, -85 dBc/Hz phase noise, and 32 terminals. It operates b/w 12470-13720 MHz frequencies, ideal for RF applications requiring precise frequency control in the range of 4.75-5.25 V supply voltage and -40 to 85 °C temperature conditions.
MTO-8002
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Phase Noise: -109 dBc/Hz; Physical Dimension: 12.7mm x 5.08mm; Nominal Supply Voltage: 15 V;
POS-400+
Mini-circuits
POS-400+ by Mini-circuits is a VCO with modulation sensitivity of 16.9 MHz/V, output power of 9.5 dBm, and phase noise of -76 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 200-380 MHz, such as communication systems and radar equipment.
LTC6992IS6-2#WTRMPBF
Analog Devices' LTC6992IS6-2#WTRMPBF is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. This surface-mount oscillator is ideal for AEC-Q100 applications requiring precise control voltage modulation.
HTO-2600R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 4; Maximum Supply Current: 100 mA; Minimum Operating Frequency: 2600 MHz; Maximum Operating Frequency: 5200 MHz;
HMC529LP5TR
HMC529LP5TR by Analog Devices is a VCO with 32 terminals, operating b/w -40 °C to 85°C. It has an output power of 4 dBm, phase noise of -110 dBc/Hz, and operates at frequencies ranging from 12.4 GHz to 13.4 GHz. Ideal for applications requiring precise frequency control in compact designs.
HMC1160LP5ETR
Analog Devices' HMC1160LP5ETR is a VCO with 5.25V max supply, 250 MHz/V modulation sensitivity, and -90 dBc/Hz phase noise. Ideal for applications requiring a voltage-controlled oscillator in the frequency range of 8.45-9.3 GHz, such as radar systems and communication equipment.
HMC385LP4ETR
Analog Devices' HMC385LP4ETR is a VCO with 24 terminals, operating from 2250 MHz to 2500 MHz. It offers -115 dBc/Hz phase noise and 4.5 dBm output power, suitable for applications requiring precise frequency control in the range of -40°C to 85°C. The device comes in a compact 4.1mm x 4.1mm x 1.0mm plastic/epoxy package for surface mount assembly.
M-020
The Z-communications M-020 VCO offers 8 MHz/V modulation sensitivity, 14 dBm output power, and -110 dBc/Hz phase noise. Ideal for applications requiring precise frequency control in the range of 19 MHz to 27 MHz.
HMC533LP4E
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Maximum Supply Voltage: 5.25 V; Maximum Control Voltage: 13 V; Output Power: 9 dBm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VTO-1070-SMA
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: CHASSIS MOUNT; Physical Dimension: 29.97mm x 24.13mm x 10.16mm; Offset Frequency: 100 kHz; Minimum Control Voltage: 0 V; Phase Noise: 106 dBc/Hz;
VTO-1990-SMD
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; Phase Noise: -100 dBc/Hz; Physical Dimension: 17.3228mm x 11.43mm x 4.064mm; Minimum Control Voltage: 0 V; Output Power: 0 dBm;
VTO-1990-SMA
Agilent Technologies
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: CHASSIS MOUNT; Maximum Supply Current: 125 mA; Nominal Supply Voltage: 8 V; Output Power: 3 dBm; Maximum Supply Voltage: 8.2 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved