Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECEIVER; Maximum Supply Voltage: 5.5 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Reception Type: DIGITAL; Sensitivity Level: -39 dBm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT Distribution GmbH
Pegasus Components GmbH
Digiode
Bristol Electronics
Atlantic Semiconductor
Decca Corp
$6.000
$5.880
$5.821
Supply Digital
Corphita
Native Components
$3.783
Northwest PG Solutions
$3.822
Fiber Optics - Receivers HFBR-2503 attributes and parameters. Explore more Fiber Optics - Receivers devices from Broadcom
Emitter or Detector Type:
Fiber Optic Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Reception Type:
Sensitivity Level:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200168
Molex
WIRE AND CABLE;
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Sensitron Semiconductor
Shenzhen Yixinsemi Electronics
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hy Electronic
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
ADN3010-11-50A-RL7
Analog Devices
ADN3010-11-50A-RL7 by Analog Devices is a fiber optic receiver for SONET communication, operating at 1310nm wavelength with 1412.5 Mbps data rate. It features a built-in amplifier and PIN photodiode, offering -16.5 dBm sensitivity level. Ideal for SMF fiber type applications in telecommunications industry.
BGO827,112
NXP Semiconductors
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 24 V; Terminal Finish: GOLD; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -20 Cel;
HFBR-2502
Broadcom
RECEIVER; Maximum Supply Voltage: 5.5 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Reception Type: DIGITAL; Nominal Supply Voltage: 5 V;
HFBR-2521Z
Broadcom's HFBR-2521Z is a POF fiber optic receiver with 660nm wavelength. It operates at 5 Mbps data rate and supports digital reception. With DIP package style, it has a body length of 18.8mm and is ideal for through hole mounting applications in various industries.
OD-J6501-HB01
Renesas Electronics
RECEIVER; Mounting Feature: SURFACE MOUNT; Maximum Supply Voltage: 3.465 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
AFBR-2012S
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 3.465 V; Maximum Operating Temperature: 95 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: IT ALSO HAS SUPPLY VOLTAGE 4.75 TO 5.25 VOLTS;
NR4211TH
RECEIVER; Maximum Supply Voltage: 3.47 V; Body Height: 14 mm; Minimum Return Loss: -27 dB; Communication Standard: OC-192, SONET; Nominal Supply Voltage: 3.3 V;
V23832-R411-M1
Infineon Technologies
RECEIVER; Maximum Supply Voltage: 3.6 V; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: 0 Cel; Nominal Operating Wavelength: 850 nm;
TOAD347-RXBS
Toshiba
RECEIVER; Mounting Feature: SURFACE MOUNT; Maximum Supply Voltage: 5 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
HFBR-24E6Z
Broadcom's HFBR-24E6Z is a PIN photodiode receiver for 62.5/125 MMF fiber, operating at 820nm wavelength with 160 Mbps data rate. Featuring SC connector and amplifier, it has sensitivity of -34.4 dBm. Ideal for analog reception in fiber optics applications with temp range -40 to 85 °C.
NR4510UT-A
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 3.45 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
HFBR-2523
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel;
HFBR-2533
Agilent Technologies
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Body Length/Diameter: 18.3 mm;
NR4510UR
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 3.45 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Reception Type: DIGITAL;
Broadcom's HFBR-2533 is a POF fiber optic receiver with 660nm wavelength. It operates at 5V, with a range of 4.75-5.25V and temperature range of 0-70°C. Designed for digital reception, it features through-hole mounting and tin/lead terminal finish.
TORX198(F)
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
AFBR-822FH1Z
RECEIVER; Maximum Supply Voltage: 3.3 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Nominal Operating Wavelength: 850 nm;
SPS424
Onsemi
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -10 Cel; JESD-609 Code: e0;
NR4210TF
RECEIVER; Mounting Feature: SURFACE MOUNT; Maximum Supply Voltage: 3.5 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -5 Cel; Minimum Supply Voltage: 3.1 V;
P1RX6B-SX51D-02
Omron
RECEIVER; Mounting Feature: PANEL MOUNT; Maximum Supply Voltage: 3.45 V; Maximum Operating Temperature: 65 Cel; Minimum Operating Temperature: 0 Cel; Reception Type: DIGITAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HFBR-2528Z
Broadcom's HFBR-2528Z is a PIN photodiode receiver for POF fiber optics with 10 Mbps data rate. Operating at 635-662 nm, it has a sensitivity level of -23 dBm and operates b/w 0-70°C. Ideal for digital reception applications with built-in amplifier feature.
HFBR-2412TZ
Broadcom's HFBR-2412TZ is a PIN photodiode receiver for fiber optics with 820nm wavelength. It operates at -40 to 85°C, has a sensitivity of -34.4 dBm, and requires 4.75-5.25V supply voltage. Ideal for analog reception using ST connector in through-hole mounting applications.
HFBR-2522Z
Broadcom's HFBR-2522Z is a POF fiber optic receiver with 660nm wavelength, 1 Mbps data rate, and DIP package style. Ideal for digital reception applications, it operates b/w 0-70°C temperature range with supply voltage of 4.75-5.25V.
HFBR-2412Z
Broadcom's HFBR-2412Z is a PIN PHOTODIODE receiver for 200, HCS fiber with ST CONNECTOR. Operating at 820 nm wavelength, it offers 5 Mbps data rate and -34.4 dBm sensitivity. Ideal for analog reception in fiber optics applications with temperatures ranging from -40 to 85 °C.
HFBR-2531Z
Broadcom's HFBR-2531Z is a POF fiber optic receiver with 660nm wavelength. It operates at 4.75-5.25V, suitable for digital reception applications. With through-hole mounting and compact dimensions of 7.62" x 18.8mm, it functions in temperatures ranging from 0 to 70°C efficiently.
HFBR-2412TCZ
HFBR-2412TCZ by Broadcom is a PIN PHOTODIODE fiber optic receiver with a max supply voltage of 5.25 V. It has a nominal operating wavelength of 820 nm and can operate in temperatures ranging from -40 to 85 °C. This receiver is commonly used in applications requiring analog reception and features a built-in amplifier for enhanced sensitivity.
HFBR-2526Z
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel;
HFBR-2523Z
Broadcom's HFBR-2523Z is a POF receiver with 660nm wavelength, 0.04 Mbps data rate, and 5.5V max supply voltage. Ideal for digital reception applications, it operates b/w 0-70°C temperatures with DIP package style for through-hole mounting.
HFBR-2524Z
Broadcom's HFBR-2524Z is a POF fiber optic receiver with 660nm wavelength. It operates at 1 Mbps data rate and supports digital reception. With a DIP package style, it has a max supply voltage of 5.25V and is ideal for through-hole mounting applications in the temperature range of 0 to 70°C.
HFBR-2416TZ
RECEIVER; Mounting Feature: PANEL MOUNT, THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: OTHER FIBER SIZES: 50/125; 100/140;
HFBR-2532
Hewlett Packard
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Body Height: 18.8 mm;
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Minimum Supply Voltage: 4.75 V;
HFBR-2532Z
Broadcom's HFBR-2532Z is a POF fiber optic receiver with 660nm wavelength. It operates at 4.75-5.25V, suitable for digital reception applications. With through-hole mounting and compact dimensions of 7.62" x 18.8mm, it can withstand temperatures from 0 to 70°C efficiently.
HFBR-2531
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Reception Type: DIGITAL;
HFBR-2531ETZ
RECEIVER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Supply Voltage: 5.25 V; Terminal Finish: TIN; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
HFBR-2412MZ
RECEIVER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved