Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Forward Current: .015 A; Minimum Operating Temperature: -20 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; JESD-609 Code: e1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Decca Corp
$14.000
$13.720
$13.583
AZTECH Wire
$18.550
Component Stockers USA
$99.990
Authorized Procurement Solutions
Northwest PG Solutions
Supply Digital
Native Components
Corphita
LED Displays HDSP-U111-EG000 attributes and parameters. Explore more LED Displays devices from Broadcom
Color:
Configuration:
Display Height:
Maximum Forward Current:
JESD-609 Code:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Terminal Finish:
HDSP-U111-EG000 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Mult Dev EOL 28/Jan/2022
PCN Design/Specification - HDSP Die Chgs 1/Dec/2021
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS138BKW,115
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semicoa
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Promax-johnton
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
Infineon Technologies
PSA08-11SURKWA
Kingbright Electronic
PSA08-11SURKWA by Kingbright Electronic is a COMMON ANODE, 1 DIGIT WITH DECIMAL POINT LED display. It has a max forward current of 0.03 A and operates in temperatures ranging from -40 to 85 °C. This HYPER RED display with a height of 20.32 mm is suitable for various applications requiring alphanumeric displays.
HDSP-2112
Broadcom
HDSP-2112 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 635nm. It operates b/w -45°C to 85°C, featuring high efficiency red color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
LSP6-W-XXX
Dialight
SINGLE COLOR LED DISPLAY CLUSTER; No. of Functions: 1; Color: COOL WHITE; Maximum Forward Current: .35 A;
BA56-11GWA
BA56-11GWA by Kingbright Electronic is a COMMON ANODE 3-digit LED display with peak wavelength of 565nm. It has a max forward current of 0.025A and max forward voltage of 2.5V, suitable for smart/normal numeric displays in applications requiring green color output at temperatures ranging from -40 to 85°C.
HDSM-431H
Broadcom's HDSM-431H is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It has a max forward current of 0.025 A and peak wavelength of 572 nm. Ideal for applications requiring a GREEN display with 10 mm height, operating b/w -40 to 105 °C temperature range.
SA52-11SRWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color: SUPER BRIGHT RED; Display Height: 13.2 mm; No. of Functions: 1;
HDSP-4205
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: IC COMPATIBLE; Color At Wavelength: Yellow; Maximum Forward Current: .04 A; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT;
HDSP-F301
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.5 V; No. of Functions: 1; Maximum Operating Temperature: 100 Cel; JESD-609 Code: e0;
HDSP-315G
HDSP-315G by Broadcom is a COMMON ANODE LED Display with 10mm height, emitting GREEN light at 566nm. It has a max forward current of 0.03A and voltage of 2.5V, suitable for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications in temperatures ranging from -40°C to 100°C.
SC56-11GWA
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Additional Features: IC COMPATIBLE; Display Height: 14.22 mm; Maximum Forward Current: .025 A; No. of Functions: 1; Minimum Operating Temperature: -40 Cel;
ACDA03-41SGWA-F01
Kingbright Electronic's ACDA03-41SGWA-F01 LED display features 2 digits with decimal point, max forward current of 0.025A, and smart/normal 7 seg numeric type. Ideal for applications requiring a super bright green display, operating b/w -40°C to 85°C.
TIL393-8
TIL393-8 by Texas Instruments is a Common Cathode 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has 8 characters, red color, and 3mm display height. Operating temp ranges from -25°C to 85°C with max forward voltage of 2.1V. Ideal for applications requiring numeric displays in various electronic devices.
HDSP-5503
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT; Maximum Forward Current: .03 A; No. of Characters: 1; Minimum Operating Temperature: -40 Cel;
HDSP-0962
Agilent Technologies
SMART/NORMAL 4 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Display Height: 7.4 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel;
HDSP-523A
Broadcom's HDSP-523A is a 7 SEG NUMERIC LED DISPLAY with COMMON CATHODE, 2 DIGITS. It has a peak wavelength of 660nm and operates b/w -40 to 85 °C. Ideal for applications requiring a red DEEP RED display with 0.0032 cd luminous intensity and 0.02 A forward current.
HTIL-311C
Agilent Technologies' HTIL-311C LED Display features peak wavelength of 655nm, 6.86mm display height, and red color at wavelength. With a temperature range of 0-85°C, it is ideal for applications requiring reliable performance in various environments. Terminal finish is Tin/Lead (Sn/Pb).
HCMS-2905
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 4; Peak Wavelength (nm): 645; Maximum Operating Temperature: 85 Cel; Display Height: 3.81 mm;
HDSP-513Y
HDSP-513Y by Broadcom is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with a max forward current of 0.02A. It operates b/w -35°C to 85°C, making it suitable for various applications requiring a YELLOW display with a height of 14.22mm.
SL1072-31T
SL1072-31T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. It operates b/w -20 °C to 60°C, emitting Red light at peak wavelength of 700nm. With 4 characters and 23mm display height, it has a max forward voltage of 2.4V, ideal for various digital display applications.
HDSP-301A
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; Maximum Forward Voltage: 2.2 V; Peak Wavelength (nm): 660; Display Height: 10 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HDSP-U111-GI000
Broadcom Ltd
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .015 A; Display Height: 8 mm; No. of Functions: 1; Maximum Operating Temperature: 90 Cel; Color: RED;
HDSP-2533
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 8; Display Height: 5 mm; Configuration: COMPLEX; Color At Wavelength: Green;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Peak Wavelength (nm): 568; Display Height: 5 mm;
HDSP-2533 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 568nm. It has 8 functions, operates b/w -40°C to 85°C, and features green color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Red; Display Height: 5.08 mm; No. of Functions: 8; Peak Wavelength (nm): 635;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Additional Features: CMOS COMPATIBLE; Configuration: COMPLEX; Color: HIGH EFFICIENCY RED;
HDSP-433G
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 105 Cel; Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -40 Cel; No. of Characters: 5;
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Operating Temperature: 105 Cel; No. of Characters: 5; Color At Wavelength: Green;
HDSP-U201
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Color At Wavelength: Red; Color: HIGH EFFICIENCY RED; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: TIN SILVER COPPER; Maximum Forward Current: .03 A; Minimum Operating Temperature: -25 Cel; No. of Characters: 1; Display Height: 8 mm;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 1; No. of Functions: 1; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 90 Cel;
HDSP-2113
Broadcom's HDSP-2113 is a 5x7 dot matrix LED display with peak wavelength of 568nm. It operates b/w -45°C to 85°C, featuring green color at 5mm height. Ideal for applications requiring complex configurations and up to 8 characters display.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -45 Cel; Color: HIGH PERFORMANCE GREEN; Additional Features: CMOS COMPATIBLE; Peak Wavelength (nm): 568;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); No. of Characters: 8; Minimum Operating Temperature: -45 Cel; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e0;
HDSP-2534
HDSP-2534 by Broadcom is a 5x7 dot matrix LED display with peak wavelength of 645nm. It has 8 functions, operates b/w -40°C to 85°C, and features red color at a height of 4.57mm. Ideal for applications requiring complex configurations and high visibility in various environments.
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Copper (Sn/Cu); Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel; Color: RED; Display Height: 5 mm;
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 645;
HDSP-U101
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Color: RED; Display Height: 8 mm; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; No. of Functions: 1;
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color At Wavelength: Red; Maximum Operating Temperature: 90 Cel; Maximum Forward Current: .015 A;
HDSP-U101 by Broadcom is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 645nm. It operates at temperatures from -20 to 90 °C and has a max forward current of 0.015A. Ideal for applications requiring a RED display with 8mm height, such as digital clocks or electronic meters.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved