Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HCPL-090J-000E by Broadcom is a CMOS technology digital isolator with 4 functions, operating at -40 to 100°C. It has a supply voltage range of 3-5.5V and comes in a small outline package suitable for industrial applications. The IC features dual terminals with matte tin finish and Gull Wing form factor, making it ideal for surface mount designs.
Median Price
$19.970
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Farnell
1+ parts
$16.610
100+ parts
$12.900
1k+ parts
-
10k+ parts
DigiKey
$13.820
$12.974
Mouser Electronics
$20.450
$14.230
$13.360
Newark
$20.570
Element14
$29.740
$23.070
EBV Elektronik
Verical
$13.512
Avnet
$13.455
$12.571
Nova Conductors
$13.670
Digiode
$15.780
TME
$22.410
Vyrian
Chip Stock
HZD GmbH
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Bristol Electronics
Electronics Depot
LWI Electronics Inc
North Shore Components
Inventory MP
Resion
Ampacity Inc.
$9.660
Semicontronic
$9.418
$9.370
Netroflash
$13.397
Corphita
$14.949
Corohmni
$15.240
Advanced Electronics
Continental Prestige Electronics
$16.170
$12.560
Decca Corp
$21.020
$20.600
$20.394
Neutron USA
$129.200
QUARKTWIN TECHNOLOGY LTD
Glotronic Ltd.
Authorized Procurement Solutions
Argo Parts USA
Perfect Parts
Supply Digital
Cyclops Electronics Ltd (Excess)
SIE Connect GmbH (Excess)
PLASTIC/EPOXY material provides durability and protection for the IC, ensuring longevity and reliability in various environments.
Surface mount capability allows for easy and efficient PCB assembly, saving time and effort during the manufacturing process.
Support for a high supply voltage of 5.5 V enables compatibility with a wide range of systems and applications.
Having 4 functions within a single IC can help streamline circuit design, reduce component count, and improve overall system efficiency.
Rectangular package shape allows for easy integration into PCB layouts and maximizes space utilization within the system design.
Having 16 terminals provides ample connectivity options for interfacing with other components, peripherals, and systems.
Wide operating temperature range of -40 to 100 °C ensures functionality in extreme conditions, making it suitable for industrial applications.
Stable nominal supply voltage of 3.3 V helps ensure reliable operation and performance consistency in the target system.
The digital isolator type provides electrical isolation between input and output, enhancing system safety, noise immunity, and reliability.
Other Function Interface ICs HCPL-090J-000E attributes and parameters. Explore more Other Function Interface ICs devices from Broadcom
Additional Features:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
HCPL-090J-000E Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Solid State Devices
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PCA9306DTR2G
PCA9306DTR2G by Onsemi is an 8-terminal IC with a temp range of -55 to 125°C. It features nickel palladium gold finish, gull wing terminals, and small outline package style. Ideal for military-grade applications requiring interface circuit functionality in compact spaces.
LTC6957IDD-2#PBF
Analog Devices
LTC6957IDD-2#PBF by Analog Devices is a CMOS interface IC with 12 terminals, operating at -40 to 85 °C. It has a supply voltage range of 3.15V to 3.45V and supports EIA-644-A; TIA-644-A standards. Ideal for industrial applications requiring precise timing and communication interfaces in compact setups.
SI8631BD-B-IS
Silicon Labs
SI8631BD-B-IS by Silicon Labs is a 16-terminal digital isolator with 2.5-5.5V supply voltage range, AEC-Q100 screening for automotive applications, and -40 to 125°C operating temperature. It features a small outline package style, CMOS technology, and gull wing terminal form suitable for various interface applications.
SI8621BB-B-ISR
Skyworks Solutions
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
ADUM3201ARZ-RL7
ADUM3201ARZ-RL7 by Analog Devices is a dual-function interface IC with 8 terminals, operating b/w -40 to 105°C. It has a supply voltage range of 3-5.5V and uses CMOS technology. Ideal for industrial applications requiring small outline packages and surface mount compatibility.
SI8642ED-B-IS2R
SI8642ED-B-IS2R by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package with 16 terminals and Gull Wing terminal form. Ideal for applications requiring high-speed data isolation in compact designs.
SI8641BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8645BA-B-IUR
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ISO7720FD
ISO7720FD by Texas Instruments is a dual-function interface IC with 2 channels, operating b/w -55 to 125°C. It features a small outline package style, Gull Wing terminal form, and CMOS technology. Ideal for military-grade applications requiring a supply voltage range of 2.25-5.5V in surface-mount designs.
ADUM4160BRWZ-RL
ADUM4160BRWZ-RL by Analog Devices is a 16-terminal IC with max supply voltage of 3.6V and operating temp range from -40 to 105°C. Ideal for industrial applications requiring interface circuitry in compact form factor, utilizing CMOS technology for reliable performance.
TCA9517DGKR
TCA9517DGKR by Texas Instruments is an 8-terminal interface IC with a supply voltage range of 0.9V to 5.5V, suitable for industrial applications. It features a small outline package style, dual terminal position, and BICMOS technology, making it ideal for surface mount designs requiring reliable signal interfacing at temperatures ranging from -40°C to 85°C.
VNI8200XPTR
VNI8200XPTR by STMicroelectronics is a 36V interface IC with 8-bit driver, 0.7A output current, and 24V nominal voltage. It is used in automotive applications due to its small outline package style and dual terminal position for efficient performance in temperature range of -40 to 125 °C.
ADG3304BRUZ
ADG3304BRUZ by Analog Devices is a CMOS interface IC with 14 terminals and a max supply voltage of 5.5V. It operates in industrial temperature range (-40 to 85 °C) and is suitable for applications requiring small outline, thin profile packages like signal routing and switching circuits.
ISO7721FDR
ISO7721FDR by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -55 to 125°C, suitable for military-grade applications. With a small outline package style and surface mount compatibility, it offers a max supply voltage of 5.5V for robust performance in various electronic systems.
ADUM1401ARWZ-RL
ADUM1401ARWZ-RL by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages ranging from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packages with dual terminal positions.
LT4430ES6#TRMPBF
LT4430ES6#TRMPBF by Analog Devices is a small outline interface IC with 6 terminals. It operates b/w 3-20V, suitable for applications requiring a supply voltage of 5V. With a temperature range of 0-125°C, it is ideal for various electronic devices needing precise signal interfacing.
ISO7421FEDR
ISO7421FEDR by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -40 to 125°C, suitable for automotive applications. With a small outline package style and nickel palladium gold terminal finish, it supports surface mount installation up to 260°C peak reflow temperature.
SI8642BD-B-ISR
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
XISO6742FQDWRQ1
XISO6742FQDWRQ1 by Texas Instruments is an automotive-grade interface IC with a supply voltage range of 1.71V to 5.5V. It features a small outline package style, CMOS technology, and AEC-Q100 screening level for robust performance in automotive applications. With dual terminals and Gull Wing form, it operates b/w -40°C to 125°C making it suitable for various automotive interface circuit designs.
ISO7731FBDWR
ISO7731FBDWR by Texas Instruments is a 16-terminal IC with CMOS technology. It operates b/w -55 to 125 °C and has a supply voltage range of 2.25-5.5 V, making it suitable for military-grade applications requiring interface circuitry in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HCPL-0931-000E
Broadcom
Broadcom's HCPL-0931-000E is a digital isolator with 8 terminals, operating b/w -40 to 100°C. It has a supply voltage range of 3V to 5.5V and uses CMOS technology. This small outline IC is ideal for industrial applications requiring surface mount compatibility and dual terminal position.
HCPL-0930-000E
HCPL-0930-000E by Broadcom is a CMOS interface IC with 2 functions, operating b/w -40 to 100°C. It has a supply voltage range of 3V to 5.5V and comes in a small outline package suitable for industrial applications. With dual terminals and matte tin finish, it's ideal for various function interface requirements.
HCPL-092J-000E
Broadcom's HCPL-092J-000E is a 16-terminal digital isolator with CMOS technology. It operates b/w -40°C to 100°C, with supply voltage ranging from 3V to 5.5V. This small outline IC is ideal for applications requiring surface mount interface solutions.
HCPL-0931-500E
HCPL-0931-500E by Broadcom is a digital isolator with 2 functions, operating at -40 to 100 °C. It has a supply voltage range of 3V to 5.5V and comes in a small outline package suitable for industrial applications.
Agilent Technologies
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
HCPL-0931
DIGITAL ISOLATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
HCPL-092J-500E
HCPL-092J-500E by Broadcom is a CMOS digital isolator with 4 functions, operating at -40 to 100°C. It has a supply voltage range of 3-5.5V and comes in a small outline package. Ideal for applications requiring high-speed signal isolation in compact designs.
HCPL-0931-500
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 3 V;
HCPL-090J-500E
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
HCPL-9031-000E
DIGITAL ISOLATOR; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 100 Cel;
HCPL-091J-000E
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
HCPL-0930-500E
HCPL-0930-500E by Broadcom is a digital isolator with 2 functions, operating at 3-5.5V. It has a small outline package, CMOS technology, and operates b/w -40 to 100°C. Ideal for applications requiring high voltage isolation in compact designs.
HCPL-9031
INTERFACE CIRCUIT;
HCPL-092J
Broadcom's HCPL-092J is a digital isolator with 4 functions, operating at -40 to 100°C. It has a supply voltage range of 3-5.5V and comes in a small outline package for surface mounting applications. Ideal for systems requiring high-speed signal isolation in compact spaces.
HCPL-0900-000E
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 100 Cel;
HCPL-091J-500E
HCPL-091J-500E by Broadcom is a digital isolator with 4 functions, operating at 3.3V nominal voltage and up to 5.5V max supply voltage. It has a small outline package style, suitable for applications requiring high temperature tolerance and dual terminal position.
HCPL-0900
HCPL-0900 by Broadcom is a digital isolator with 8 terminals, operating b/w -40 to 100°C. It has a supply voltage range of 3-5.5V and uses CMOS technology. Ideal for applications requiring small outline packages and surface mount compatibility.
HCPL-900J-000E
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Length: 10.285 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved