Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2250.0; Terminal Finish: Silver (Ag); Color: WHITE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Decca Corp
$2.000
$1.960
$1.940
AZTECH Wire
$16.160
Native Components
$109.907
$105.511
Northwest PG Solutions
$120.897
Corphita
Supply Digital
Visible LEDs ASMT-UWB1-ZAAF2 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Additional Features:
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Shape:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
ASMT-UWB1-ZAAF2 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - ASMT-UWBx/QSMT-UWx 01/Aug/2022
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NXP Semiconductors
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Semtech
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
Bourns
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Diotec Semiconductor Ag
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
150060GS55040
Wuerth Elektronik & Kg
150060GS55040 by Wurth Elektronik is a single color LED with a peak wavelength of 520nm and a viewing angle of 140°. With a size of 1mm, it has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring green light emission in compact spaces.
150060RS55040
150060RS55040 by Wurth Elektronik is a single color LED with peak wavelength of 632nm, forward current of 0.02A, and max forward voltage of 2.4V. It is ideal for applications requiring a red light source in compact spaces due to its small size of 1mm and surface mounting feature.
HLMP-3507-D0002
Broadcom
HLMP-3507-D0002 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in radial mounting configurations.
OVLAW4CB7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3500.0; Lens Type: WATER CLEAR; Packing Method: TR;
LTST-C191KFKT-5A
Lite-on Technology
Visible LEDs;
KP-3216SRC-PRV
Kingbright Electronic
Kingbright Electronic's KP-3216SRC-PRV is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. With max forward current of 0.03A, it offers super bright red light ideal for surface mount applications in various electronic devices.
HLMP-1301-G0000
Hewlett Packard
SINGLE COLOR LED; Maximum Forward Current: .03 A; Size: 3 mm; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Shape: ROUND;
KPT-2012CGCK
KPT-2012CGCK by Kingbright Electronic is a 1.3mm green LED with a peak wavelength of 574nm and a min luminous intensity of 120cd. It is suitable for surface mount applications and has a max forward current of 0.03A.
AAA3528LSEEZGKQBKS
Kingbright Electronic's AAA3528LSEEZGKQBKS is a 2.4mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 630/515/460nm. It has a max forward current of 0.03A and viewing angle of 120°, suitable for surface mount applications in hyper red/green/blue lighting scenarios.
LTST-C170KGKT
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
555-2403F
Dialight
Dialight's 555-2403F LED is a 2mm single color with built-in resistor, emitting yellow light at peak wavelength of 583nm. With max forward current of 0.0067A and voltage of 2.4V, it's ideal for radial mounting applications requiring diffused illumination in a compact space.
XHP35B-00-0000-0D0HD230E
Wolfspeed
SINGLE COLOR LED;
HLMP1503
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 3 V; Maximum Forward Current: .03 A; JESD-609 Code: e0;
SML-P11MTT86RH
ROHM
ROHM SML-P11MTT86RH is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A and max. forward voltage of 1.9V. Ideal for surface mount applications, it emits YELLOWISH GREEN light with min. luminous intensity of 0.0016cd, suitable for TR packing method in optoelectronics at -40 to 85°C operating temp range.
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-LX0603USBW-TR
Lumex
The Lumex SML-LX0603USBW-TR is a 1mm single color LED with peak wavelength of 470nm. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications, this ultra super blue LED operates b/w -25 to 85 °C, making it suitable for various lighting projects.
Q12P1BXXW12E
Apem Components
The Apem Components Q12P1BXXW12E is a 12mm single color LED with diffused lens, emitting white light at 1200.0mcd intensity. Ideal for panel mounting applications, it has a wide 60° viewing angle and operates b/w -40°C to 85°C temperature range.
KP-2012EC
KP-2012EC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with a peak wavelength of 627nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices due to its compact size and water clear lens type.
LLN9-WW-XXX
The Dialight LLN9-WW-XXX is a complex LED array with 9 functions, warm white color, and surface mount feature. Ideal for lighting applications in bulk packaging, this single-color LED array has 4 terminals and a round shape.
TLDR5400
Vishay Intertechnology
TLDR5400 by Vishay Intertechnology is a 5mm SINGLE COLOR LED with peak wavelength of 650nm. It has a max forward current of 0.05A and emits DEEP RED light. Ideal for applications requiring a viewing angle of 60°, such as indicator lights in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ASMT-UWBG-NACF8
ASMT-UWBG-NACF8 by Broadcom is a single color LED with max forward current of 0.1A and max operating temp of 100°C. At 1.1mm height, it emits white light at 120° viewing angle. Ideal for applications requiring low power consumption and high brightness in compact spaces.
ASMT-YTB7-0AA02
TRIPLE COLOR LED; Terminal Finish: Silver (Ag); JESD-609 Code: e4;
ASMT-YTD7-0AA02
ASMT-YTD7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with separate, 3-element configuration and diffused lens. It has peak wavelengths of 630nm (RED), 522nm (GREEN), and 465nm (BLUE). Ideal for applications requiring colorful illumination with a viewing angle of 120° and nominal luminous intensities of up to 1900mcd.
ASMT-YTB2-0BB02
ASMT-YTB2-0BB02 by Broadcom is a 2.3mm rectangular visible LED with separate, 3-element configuration. It has a peak wavelength of 629/521/464nm and max forward current of 0.05A. This LED is commonly used in applications requiring single color illumination with red/green/blue colors, such as displays and indicators.
ASMT-CW00
ASMT-CW00 by Broadcom is a 1.2mm single color LED with a max forward current of 0.01A. It has a white color and a viewing angle of 170°. This surface mount LED is commonly used in applications requiring bright, non-diffused lighting.
ASMT-YTC7-0AA02
ASMT-YTC7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with peak wavelengths of 630/522/465nm, offering red/green/blue colors. With a max forward current of 0.025A and viewing angle of 110°, it's ideal for surface mount applications requiring diffused lighting effects. Operating b/w -40 to 100 °C, this LED has a nominal luminous intensity range of 160.0-840.0mcd for versatile lighting solutions.
ASMT-RF45-AN002
ASMT-RF45-AN002 by Broadcom is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and max forward current of 0.02A. Ideal for applications requiring YELLOW GREEN light emission, it has a viewing angle of 145° and operates b/w -40°C to 100°C temperatures.
ASMT-RJ45-AQ502
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 130.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: SILVER;
ASMT-RR45-AQ902
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: SILVER;
ASMT-YTD2-0BB02
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 745.0/1600.0/380.0; Terminal Finish: SILVER; Viewing Angle: 120 deg;
ASMT-QTB0-0AA02
ASMT-QTB0-0AA02 by Broadcom is a 2.9mm TRIPLE COLOR LED with COMMON ANODE configuration and 120° viewing angle. It has peak wavelengths of 629/521/465 nm, max forward current of 0.05 A, and nominal luminous intensities of 620.0/1200.0/280.0 mcd. Ideal for surface mount applications requiring red/green/blue illumination in various electronic devices.
ASMT-QRBD-AEF0E
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Size: 2.4 mm; Maximum Forward Current: .15 A; Height: 1.9 mm;
ASMT-UWB1-NX3J2
ASMT-UWB1-NX3J2 by Broadcom is a single color LED with max forward current of 0.03A and max forward voltage of 3.6V. With a viewing angle of 120°, it's ideal for applications requiring white light illumination in compact spaces due to its small height of 1.8mm and surface mounting feature.
ASMT-QRBD-AGH0E
ASMT-JR30-ARS01
ASMT-JR30-ARS01 by Broadcom is a 3.7mm SINGLE COLOR LED with peak wavelength of 635nm, forward current of 0.7A, and forward voltage of 3.1V. Ideal for applications requiring surface mount visible LEDs with orange-red light emission in a compact round shape.
ASMT-CB20
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Terminal Finish: Silver (Ag); Packing Method: TAPE;
ASMT-UWB1-NX3B2
ASMT-UWB1-NX3B2 by Broadcom is a single color LED with max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, it has a max operating temp of 85°C and emits white light at a wavelength of 3.6V.
ASMT-UWB1-NX3G2
ASMT-UWB1-NX3G2 by Broadcom is a single color LED with 0.03A max forward current and 2300.0mcd luminous intensity. Ideal for surface mount applications, it has a viewing angle of 120° and operates b/w -40 to 85 °C temperatures.
ASMT-JA30-ARS01
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Terminal Finish: SILVER; Maximum Reverse Voltage: 5 V; No. of Functions: 1;
ASMT-UWB1-NX302
ASMT-UWB1-NX302 by Broadcom is a single color LED with max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, it has a white color at wavelength and nominal luminous intensity of 2300 mcd.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved