Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Lens Type: NONDIFFUSED; Height: 3.3 mm; Terminal Pitch: 5.08 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Advanced Electronics
$0.156
$0.142
$0.128
Corohmni
$0.464
AZTECH Wire
$6.370
$6.120
$6.000
$5.880
Decca Corp
$19.000
$18.620
$18.434
Supply Digital
Corphita
Northwest PG Solutions
Native Components
Assy Fe
Visible LEDs ASMT-MY62-NEG00 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Shape:
Size:
Terminal Pitch:
Viewing Angle:
ASMT-MY62-NEG00 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Multiple Devices 01/Jul/2011
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
Silicon Group
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Taitron Components
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
HLMP-3301-D0000
Broadcom
HLMP-3301-D0000 by Broadcom is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging, with radial mounting feature.
OVM12F3Y7
Tt Electronics Plc
SINGLE COLOR LED;
150505M173300
Wuerth Elektronik & Kg
TRIPLE COLOR LED;
TLHK5800
Vishay Intertechnology's TLHK5800 is a 5mm red LED with peak wavelength of 643nm, forward current of 0.03A, and luminous intensity of 2500mcd. Ideal for applications requiring single color illumination in environments ranging from -40°C to 100°C.
LTST-C170GKT
Lite-on Technology
LTST-C170GKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 130° and nominal luminous intensity of 6.0mcd, making it suitable for various lighting solutions.
HLMP-1700
Quality Technologies
SINGLE COLOR LED; Maximum Forward Current: .0075 A; Maximum Operating Temperature: 100 Cel; No. of Functions: 1; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
SSF-LXH100YD
Lumex
The Lumex SSF-LXH100YD is a 5mm yellow LED with a peak wavelength of 585nm and a viewing angle of 60°. It has a built-in resistor, operates at temperatures from -40°C to 85°C, and has a luminous intensity of 30.0mcd. Ideal for applications requiring a reliable, bright yellow light source in various electronic devices.
LTST-C193KGKT-5A
LTST-C193KGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 574nm, viewing angle of 130°, and luminous intensity of 16.25mcd. Ideal for surface mount applications in electronics, it operates b/w -55°C to 85°C temperature range and has a compact size of 1.15mm x 0.35mm.
598-8081-107F
Dialight
Dialight's 598-8081-107F is a single color LED with water clear lens, emitting green light. It has a size of 1.1mm and max forward current of 0.02A. Ideal for surface mount applications, with viewing angle of 140° and luminous intensity of 340mcd.
BR1111C-TR
Stanley Electric
Stanley Electric's BR1111C-TR is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for surface mount applications, it offers a viewing angle of 141° and nominal luminous intensity of 11.7mcd, making it suitable for various visible LED lighting projects.
VLMU3510-365-130
LGT67K-H2K1-24-Z
Osram Opto Semiconductors
The Osram Opto Semiconductors LGT67K-H2K1-24-Z is a 2.4mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. It is ideal for applications requiring a green light source, with a viewing angle of 120° and surface mounting feature.
SMLP36RGB2W3RD
ROHM
ROHM SMLP36RGB2W3RD is a 1.5mm TRIPLE COLOR LED with SEPARATE configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for applications requiring RGB illumination in compact spaces like consumer electronics and automotive lighting.
SML-P11MTT86RH
ROHM SML-P11MTT86RH is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A and max. forward voltage of 1.9V. Ideal for surface mount applications, it emits YELLOWISH GREEN light with min. luminous intensity of 0.0016cd, suitable for TR packing method in optoelectronics at -40 to 85°C operating temp range.
SML-P11UTT86R
ROHM SML-P11UTT86R is a 0.6mm SINGLE COLOR LED with 0.02A forward current, emitting RED light at 2.5mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
LGM67K-G1J2-24-Z
Osram Opto Semiconductors' LGM67K-G1J2-24-Z is a 1.5mm single-color LED with peak wavelength of 572nm, emitting green light. It has a max forward current of 0.02A and viewing angle of 120°, suitable for surface mount applications in various electronic devices.
LSR976-NR-1
LSR976-NR-1 by Osram Opto Semiconductors is a 1.3mm single color LED with peak wavelength of 645nm. It has a max forward current of 0.025A and viewing angle of 160°, making it ideal for applications requiring high luminous intensity in super red light, such as automotive lighting and signage displays.
HLMP-3507-D0001
HLMP-3507-D0001 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in radial mounting configurations.
4501-2-2-001
Microprecision Electronics Sa
597-2001-213F
Dialight's 597-2001-213F is a single color LED with peak wavelength of 643nm and forward voltage of 2.6V. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 50.0mcd, making it suitable for indicators and signage in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ASMT-UWBG-NACF8
ASMT-UWBG-NACF8 by Broadcom is a single color LED with max forward current of 0.1A and max operating temp of 100°C. At 1.1mm height, it emits white light at 120° viewing angle. Ideal for applications requiring low power consumption and high brightness in compact spaces.
ASMT-YTB7-0AA02
TRIPLE COLOR LED; Terminal Finish: Silver (Ag); JESD-609 Code: e4;
ASMT-YTD7-0AA02
ASMT-YTD7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with separate, 3-element configuration and diffused lens. It has peak wavelengths of 630nm (RED), 522nm (GREEN), and 465nm (BLUE). Ideal for applications requiring colorful illumination with a viewing angle of 120° and nominal luminous intensities of up to 1900mcd.
ASMT-YTB2-0BB02
ASMT-YTB2-0BB02 by Broadcom is a 2.3mm rectangular visible LED with separate, 3-element configuration. It has a peak wavelength of 629/521/464nm and max forward current of 0.05A. This LED is commonly used in applications requiring single color illumination with red/green/blue colors, such as displays and indicators.
ASMT-CW00
ASMT-CW00 by Broadcom is a 1.2mm single color LED with a max forward current of 0.01A. It has a white color and a viewing angle of 170°. This surface mount LED is commonly used in applications requiring bright, non-diffused lighting.
ASMT-YTC7-0AA02
ASMT-YTC7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with peak wavelengths of 630/522/465nm, offering red/green/blue colors. With a max forward current of 0.025A and viewing angle of 110°, it's ideal for surface mount applications requiring diffused lighting effects. Operating b/w -40 to 100 °C, this LED has a nominal luminous intensity range of 160.0-840.0mcd for versatile lighting solutions.
ASMT-RF45-AN002
ASMT-RF45-AN002 by Broadcom is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and max forward current of 0.02A. Ideal for applications requiring YELLOW GREEN light emission, it has a viewing angle of 145° and operates b/w -40°C to 100°C temperatures.
ASMT-RJ45-AQ502
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 130.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: SILVER;
ASMT-RR45-AQ902
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: SILVER;
ASMT-YTD2-0BB02
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 745.0/1600.0/380.0; Terminal Finish: SILVER; Viewing Angle: 120 deg;
ASMT-QTB0-0AA02
ASMT-QTB0-0AA02 by Broadcom is a 2.9mm TRIPLE COLOR LED with COMMON ANODE configuration and 120° viewing angle. It has peak wavelengths of 629/521/465 nm, max forward current of 0.05 A, and nominal luminous intensities of 620.0/1200.0/280.0 mcd. Ideal for surface mount applications requiring red/green/blue illumination in various electronic devices.
ASMT-QRBD-AEF0E
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Size: 2.4 mm; Maximum Forward Current: .15 A; Height: 1.9 mm;
ASMT-UWB1-NX3J2
ASMT-UWB1-NX3J2 by Broadcom is a single color LED with max forward current of 0.03A and max forward voltage of 3.6V. With a viewing angle of 120°, it's ideal for applications requiring white light illumination in compact spaces due to its small height of 1.8mm and surface mounting feature.
ASMT-QRBD-AGH0E
ASMT-JR30-ARS01
ASMT-JR30-ARS01 by Broadcom is a 3.7mm SINGLE COLOR LED with peak wavelength of 635nm, forward current of 0.7A, and forward voltage of 3.1V. Ideal for applications requiring surface mount visible LEDs with orange-red light emission in a compact round shape.
ASMT-CB20
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Terminal Finish: Silver (Ag); Packing Method: TAPE;
ASMT-UWB1-NX3B2
ASMT-UWB1-NX3B2 by Broadcom is a single color LED with max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, it has a max operating temp of 85°C and emits white light at a wavelength of 3.6V.
ASMT-UWB1-NX3G2
ASMT-UWB1-NX3G2 by Broadcom is a single color LED with 0.03A max forward current and 2300.0mcd luminous intensity. Ideal for surface mount applications, it has a viewing angle of 120° and operates b/w -40 to 85 °C temperatures.
ASMT-JA30-ARS01
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Terminal Finish: SILVER; Maximum Reverse Voltage: 5 V; No. of Functions: 1;
ASMT-UWB1-NX302
ASMT-UWB1-NX302 by Broadcom is a single color LED with max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, it has a white color at wavelength and nominal luminous intensity of 2300 mcd.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved