Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ASMT-AB00-NLN00 by Broadcom is a 6mm BLUE LED with 0.35A max forward current, emitting at 460nm. Ideal for surface mount applications, it has a wide 140° viewing angle and operates b/w -40°C to 120°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Nova Conductors
Andel Nordic
$4.829
$4.636
Decca Corp
$6.000
$5.880
$5.821
Ampacity Inc.
$8.100
AZTECH Wire
$20.490
QUARKTWIN TECHNOLOGY LTD
Supply Digital
Corphita
Argo Parts USA
Aranea Global
Single configuration makes it easy to use and integrate in various applications.
Compact size allows for flexible placement and design options.
High maximum forward current allows for brighter light output.
Peak wavelength of 460 nm provides a vibrant blue color output.
Single color LED ensures consistent and uniform color output.
Only two terminals simplifies the wiring and connection process.
High maximum operating temperature ensures reliable performance in various environments.
Low height profile enables easy integration in compact spaces.
Round shape provides a wide viewing angle of 140°.
Wide range of minimum operating temperature allows for use in extreme cold conditions.
Bright blue color output is ideal for applications where visibility and aesthetics are important.
Tube packing ensures safe storage and transportation of the LEDs.
Wide viewing angle of 140° enhances visibility and coverage of the emitted light.
Surface mount design simplifies installation and allows for easy placement on circuit boards.
Visible LEDs ASMT-AB00-NLN00 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Viewing Angle:
ASMT-AB00-NLN00 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Obsolescence/ EOL - Multiple Devices 1/Mar/2010
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Zetex Plc
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
HSMS-C170
Broadcom
HSMS-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring high efficiency red or orange light emission in surface mount configurations.
HSMS-C190
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
564-0100-111F
Dialight
Dialight's 564-0100-111F is a 3mm red LED array with separate, 3-element configuration. It has a peak wavelength of 635nm and max forward current of 0.03A. Ideal for applications requiring high luminous intensity in a compact size.
APT2012CGCK
Kingbright Electronic
APT2012CGCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 574nm, suitable for applications requiring GREEN light emission. With a max forward current of 0.03A and viewing angle of 120°, it's ideal for surface mount installations in various electronic devices. Operating temperatures range from -40 to 85 °C, making it versatile for different environments.
591-2301-013F
Dialight's 591-2301-013F is a single color LED with peak wavelength of 572nm, forward current of 0.03A, and luminous intensity of 4.8mcd. Ideal for surface mount applications, it emits green light with a viewing angle of 40°.
HLMP-3301
Fairchild Semiconductor
Fairchild Semiconductor's HLMP-3301 is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and operates b/w -55°C to 100°C. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
KP-1608SYCK
Kingbright Electronic's KP-1608SYCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 590nm and luminous intensity of 120.0mcd. Ideal for applications requiring SUPER BRIGHT YELLOW illumination, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
HLMP-4000#002
Hewlett Packard
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 5/8; Lens Type: DIFFUSED; Terminal Pitch: 1.27 mm;
SSL-LX5093IGW
Lumex
The Lumex SSL-LX5093IGW is a 5mm dual-color LED with red/green colors, diffused milky white lens, and common bipolar terminal. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 30.0/20.0 mcd. Ideal for applications requiring radial mounting such as indicator lights in electronic devices.
TLHB4400
Telefunken Microelectronics
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 25 deg; Maximum Forward Current: .06 A; Peak Wavelength (nm): 470;
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-LX0805SRC-TR
SML-LX0805SRC-TR by Lumex is a 1.4mm SINGLE COLOR LED with peak wavelength of 660nm, forward current of 0.025A, and luminous intensity of 25.0mcd. Ideal for surface mount applications in products requiring super red light emission at a wide viewing angle of 140°.
HSMF-C115
HSMF-C115 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/523/468nm. With a size of 2.1mm and max forward current of 0.02A, it offers red/green/blue colors for various applications like signage, displays, and indicator lights due to its surface mount feature and viewing angle of 120°.
HLMP-1790-A00A1
Broadcom's HLMP-1790-A00A1 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a compact, low-power consumption light source.
551-3007F
Dialight's 551-3007F is a 3mm DUAL COLOR LED with COMMON BIPOLAR TERMINAL. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 4.7/10.0 mcd. Ideal for applications requiring red/green indicator lights with a viewing angle of 60° and radial mounting feature.
LST676-R1S1-1
Osram Opto Semiconductors
The Osram Opto Semiconductors LST676-R1S1-1 is a 2.4mm single color LED with peak wavelength of 645nm. It has a max forward current of 0.03A and viewing angle of 120°, making it ideal for applications requiring super red light emission in compact spaces. With a max operating temperature of 100°C and surface mounting feature, it offers reliable performance in various electronic devices.
557-1502-203F
Dialight's 557-1502-203F is a 17.8mm single color LED with max forward current of 0.08A, ideal for panel mount applications. Operating temp range from -25°C to 85°C makes it suitable for various industries requiring red light indicators in bulk packaging.
LTST-C19HE1WT-H
Lite-on Technology
Visible LEDs;
SML-D15MWT86
ROHM
ROHM's SML-D15MWT86 is a 1.2mm SINGLE COLOR LED with 0.035A max forward current and 71.0mcd nominal luminous intensity. Ideal for surface mount applications, it emits YELLOWISH GREEN light at -40 to 100°C, making it suitable for various visible LED lighting projects.
LSGT676-P7Q7-1+N7P7-24
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24 is a dual-color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 98.0/62.75mcd. Ideal for applications requiring super red/green colors in compact designs with surface mounting features.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ASMT-UWBG-NACF8
ASMT-UWBG-NACF8 by Broadcom is a single color LED with max forward current of 0.1A and max operating temp of 100°C. At 1.1mm height, it emits white light at 120° viewing angle. Ideal for applications requiring low power consumption and high brightness in compact spaces.
ASMT-YTB7-0AA02
TRIPLE COLOR LED; Terminal Finish: Silver (Ag); JESD-609 Code: e4;
ASMT-YTD7-0AA02
ASMT-YTD7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with separate, 3-element configuration and diffused lens. It has peak wavelengths of 630nm (RED), 522nm (GREEN), and 465nm (BLUE). Ideal for applications requiring colorful illumination with a viewing angle of 120° and nominal luminous intensities of up to 1900mcd.
ASMT-YTB2-0BB02
ASMT-YTB2-0BB02 by Broadcom is a 2.3mm rectangular visible LED with separate, 3-element configuration. It has a peak wavelength of 629/521/464nm and max forward current of 0.05A. This LED is commonly used in applications requiring single color illumination with red/green/blue colors, such as displays and indicators.
ASMT-CW00
ASMT-CW00 by Broadcom is a 1.2mm single color LED with a max forward current of 0.01A. It has a white color and a viewing angle of 170°. This surface mount LED is commonly used in applications requiring bright, non-diffused lighting.
ASMT-YTC7-0AA02
ASMT-YTC7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with peak wavelengths of 630/522/465nm, offering red/green/blue colors. With a max forward current of 0.025A and viewing angle of 110°, it's ideal for surface mount applications requiring diffused lighting effects. Operating b/w -40 to 100 °C, this LED has a nominal luminous intensity range of 160.0-840.0mcd for versatile lighting solutions.
ASMT-RF45-AN002
ASMT-RF45-AN002 by Broadcom is a 1.1mm SINGLE COLOR LED with peak wavelength of 574nm and max forward current of 0.02A. Ideal for applications requiring YELLOW GREEN light emission, it has a viewing angle of 145° and operates b/w -40°C to 100°C temperatures.
ASMT-RJ45-AQ502
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 130.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: SILVER;
ASMT-RR45-AQ902
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: SILVER;
ASMT-YTD2-0BB02
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 745.0/1600.0/380.0; Terminal Finish: SILVER; Viewing Angle: 120 deg;
ASMT-QTB0-0AA02
ASMT-QTB0-0AA02 by Broadcom is a 2.9mm TRIPLE COLOR LED with COMMON ANODE configuration and 120° viewing angle. It has peak wavelengths of 629/521/465 nm, max forward current of 0.05 A, and nominal luminous intensities of 620.0/1200.0/280.0 mcd. Ideal for surface mount applications requiring red/green/blue illumination in various electronic devices.
ASMT-QRBD-AEF0E
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Size: 2.4 mm; Maximum Forward Current: .15 A; Height: 1.9 mm;
ASMT-UWB1-NX3J2
ASMT-UWB1-NX3J2 by Broadcom is a single color LED with max forward current of 0.03A and max forward voltage of 3.6V. With a viewing angle of 120°, it's ideal for applications requiring white light illumination in compact spaces due to its small height of 1.8mm and surface mounting feature.
ASMT-QRBD-AGH0E
SINGLE COLOR LED;
ASMT-JR30-ARS01
ASMT-JR30-ARS01 by Broadcom is a 3.7mm SINGLE COLOR LED with peak wavelength of 635nm, forward current of 0.7A, and forward voltage of 3.1V. Ideal for applications requiring surface mount visible LEDs with orange-red light emission in a compact round shape.
ASMT-CB20
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Terminal Finish: Silver (Ag); Packing Method: TAPE;
ASMT-UWB1-NX3B2
ASMT-UWB1-NX3B2 by Broadcom is a single color LED with max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, it has a max operating temp of 85°C and emits white light at a wavelength of 3.6V.
ASMT-UWB1-NX3G2
ASMT-UWB1-NX3G2 by Broadcom is a single color LED with 0.03A max forward current and 2300.0mcd luminous intensity. Ideal for surface mount applications, it has a viewing angle of 120° and operates b/w -40 to 85 °C temperatures.
ASMT-JA30-ARS01
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Terminal Finish: SILVER; Maximum Reverse Voltage: 5 V; No. of Functions: 1;
ASMT-UWB1-NX302
ASMT-UWB1-NX302 by Broadcom is a single color LED with max forward current of 0.03A and viewing angle of 120°. Ideal for surface mount applications, it has a white color at wavelength and nominal luminous intensity of 2300 mcd.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved