Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DOUBLE BALANCED; Package Equivalence Code: DIE OR CHIP; Maximum Operating Frequency: 36000 MHz; Maximum Conversion Loss: 12 dB; Additional Features: USABLE TO 42 GHZ; Construction: COMPONENT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Decca Corp
$7.000
$6.860
$6.791
QUARKTWIN TECHNOLOGY LTD
Glotronic Ltd.
Northwest PG Solutions
Native Components
Corphita
Supply Digital
Perfect Parts
RF/Microwave Mixers AMMC-3040-W10 attributes and parameters. Explore more RF/Microwave Mixers devices from Broadcom
Additional Features:
Characteristic Impedance:
Construction:
Maximum Conversion Loss:
Maximum Operating Frequency:
Minimum Operating Frequency:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
AMMC-3040-W10 RF & Microwave trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Daco Semiconductor
PMB2331-T
Infineon Technologies
DOUBLE BALANCED; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Maximum Operating Frequency: 2000 MHz;
HMC1063LP3ETR
Analog Devices
HMC1063LP3ETR by Analog Devices is a RF/Microwave Mixer with GaAs technology, operating from 24-28 GHz. It features 16 terminals, matte tin finish, and can handle up to 13 dBm CW input power. Ideal for image rejection applications in temperature range of -40 to 85°C.
PPM-2515M
Broadcom
TRIPLE BALANCED; Construction: MODULE; Minimum Operating Frequency: 50 MHz; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2500 MHz; Minimum Operating Temperature: -55 Cel;
IAM-82008
Agilent Technologies
Agilent Technologies' IAM-82008 RF/Microwave Mixer features 8 terminals, operates at -40 to 85°C, and requires a 10V power supply. With a max supply current of 65mA, this surface mount device with tin/lead finish is ideal for various RF applications.
934063112115
NXP Semiconductors
DOUBLE BALANCED; Minimum Operating Frequency: 880 MHz; Terminal Finish: TIN; Maximum Input Power (CW): 10 dBm; JESD-609 Code: e3; Maximum Operating Frequency: 2450 MHz;
HMC554ALC3BTR-R5
Analog Devices' HMC554ALC3BTR-R5 is a RF/Microwave Mixer with 25 dBm CW input power, 50 ohm impedance, and 11.5 dB conversion loss. It operates b/w -40 to 85 °C and covers frequencies from 10-20 GHz. Ideal for high-frequency signal mixing in various communication systems.
AMMC-6550-W10
TRIPLE BALANCED; Maximum Conversion Loss: 10 dB; Construction: COMPONENT; Package Equivalence Code: DIE OR CHIP; Minimum Operating Frequency: 15000 MHz; Maximum Input Power (CW): 25 dBm;
HMC119
RF/Microwave Mixers; Technology: GAAS; Power Supplies (V): 5; Maximum Operating Temperature: 125 Cel; Package Equivalence Code: DIE OR CHIP; Minimum Operating Temperature: -55 Cel;
UPC8106TB-E3-A
Renesas Electronics
DOUBLE BALANCED;
HMC170C8
Analog Devices' HMC170C8 is a RF/Microwave Mixer with 50 ohm impedance, 10 dB max conversion loss, and 13 dBm CW input power. It operates from -55°C to 85°C, suitable for applications requiring double balanced mixers in the frequency range of 2500-4000 MHz.
HMC144LC4
Analog Devices' HMC144LC4 is a RF/Microwave Mixer with 15 dBm CW input power, 85°C max temp, and 50 ohm impedance. Ideal for applications requiring double balanced mixers in the frequency range of 6-20 GHz.
LRMS-1MH
Mini-circuits
LRMS-1MH by Mini-circuits is a ceramic RF mixer with 6 terminals. It operates from 2 MHz to 500 MHz, offering a max conversion loss of 8 dB and handling up to 23 dBm CW input power. Ideal for double balanced RF/microwave applications, it has a VSWR of 1.96 and can be surface mounted for ease of installation in various systems.
HMC525A
RF/Microwave Mixers;
ADE-1L+
ADE-1L+ by Mini-circuits is a RF/Microwave Mixer with 50 ohm impedance, 8 dB conversion loss, and 500 MHz max frequency. It is a double balanced component suitable for surface mount applications in temperatures ranging from -40 to 85 °C.
HMC-C041
Analog Devices' HMC-C041 is a double balanced RF/Microwave Mixer with 50 ohm impedance. It operates from 6-10 GHz, handles up to 20 dBm CW power, and has a max conversion loss of 10 dB. Ideal for applications requiring high-frequency mixing in coaxial construction.
HMC1048ALC3BTR
Analog Devices' HMC1048ALC3BTR is a RF/Microwave Mixer with 16 dBm CW input power, 50 ohm impedance, and 14 dB conversion loss. It operates from -40 to 85 °C and covers frequencies b/w 2250-18000 MHz. Ideal for applications requiring double balanced mixers in RF/microwave systems.
HA21009MS(5V)
DOUBLE BALANCED; Construction: COMPONENT;
HMC554ALC3B
Analog Devices' HMC554ALC3B is a RF/Microwave Mixer with 25 dBm CW input power, 85°C max temp, and 11.5 dB conversion loss. It operates from 10-20 GHz, ideal for double balanced applications in the RF/microwave domain.
SKY73021-11
Skyworks Solutions
SKY73021-11 by Skyworks Solutions is a RF/Microwave Mixer with 20 dBm CW power, operating from -40 to 85 °C. It features double balanced design, 50 ohm impedance, and operates b/w 1700-2200 MHz. Ideal for high-frequency signal processing applications.
HMC351S8TR
Analog Devices' HMC351S8TR is a GAAS technology RF/Microwave Mixer with 8 terminals. It operates b/w -40 °C to 85°C, featuring a double balanced design for surface mount applications. The package body material is plastic/epoxy, making it suitable for various RF and microwave circuit designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AMMC-6530-W10
IMAGE REJECTION; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 25 dBm; Maximum Conversion Loss: 8 dB; Maximum Operating Frequency: 30000 MHz; Construction: COMPONENT;
IMAGE REJECTION; Maximum Conversion Loss: 8 dB; Maximum Operating Frequency: 30000 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 25 dBm; Minimum Operating Frequency: 5000 MHz;
AMMC-6530-W50
IMAGE REJECTION; Maximum Input Power (CW): 25 dBm; Maximum Operating Frequency: 30000 MHz; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Maximum Conversion Loss: 8 dB;
IMAGE REJECTION; Characteristic Impedance: 50 ohm; Package Equivalence Code: DIE OR CHIP; Maximum Input Power (CW): 25 dBm; Minimum Operating Frequency: 5000 MHz; Construction: COMPONENT;
AMMC-6545-W10
SINGLE BALANCED; Package Equivalence Code: DIE OR CHIP; Maximum Operating Frequency: 45000 MHz; Maximum Conversion Loss: 12 dB; Maximum Input Power (CW): 25 dBm; Minimum Operating Frequency: 18000 MHz;
AMMC-3040
AMMC-3040-W50
DOUBLE BALANCED; Power Supplies (V): 2/5; Maximum Conversion Loss: 12 dB; Package Equivalence Code: DIE OR CHIP; Construction: COMPONENT; Maximum Operating Frequency: 36000 MHz;
AMMC-3041-W10
DOUBLE BALANCED; Construction: COMPONENT; Maximum Operating Frequency: 42000 MHz; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 140 Cel; Maximum Conversion Loss: 13 dB;
AMMC-3041-W50
DOUBLE BALANCED; Minimum Operating Frequency: 18000 MHz; Maximum Operating Frequency: 42000 MHz; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 140 Cel; Characteristic Impedance: 50 ohm;
AMMC-6545
SINGLE BALANCED;
AMMC-6545-W50
SINGLE BALANCED; Maximum Conversion Loss: 12 dB; Minimum Operating Frequency: 18000 MHz; Maximum Input Power (CW): 25 dBm; Package Equivalence Code: DIE OR CHIP; Construction: COMPONENT;
AMMC-6550
RF/Microwave Mixers; Package Equivalence Code: DIE OR CHIP;
AMMC-6550-W50
TRIPLE BALANCED; Maximum Conversion Loss: 10 dB; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 15000 MHz; Maximum Operating Frequency: 50000 MHz; Construction: COMPONENT;
AMMC-3040-W10
DOUBLE BALANCED; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Additional Features: USABLE TO 42 GHZ; Maximum Conversion Loss: 12 dB; Power Supplies (V): 2/5;
DOUBLE BALANCED; Power Supplies (V): 2/5; Package Equivalence Code: DIE OR CHIP; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Additional Features: USABLE TO 42 GHZ;
DOUBLE BALANCED; Minimum Operating Frequency: 18000 MHz; Maximum Operating Frequency: 42000 MHz; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -55 Cel;
DOUBLE BALANCED; Maximum Operating Frequency: 42000 MHz; Maximum Conversion Loss: 13 dB; Package Equivalence Code: DIE OR CHIP; Construction: COMPONENT; Minimum Operating Temperature: -55 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved