Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns SRR1806-100M is a shielded, surface mount fixed inductor with 10uH nominal inductance and 4A max rated current. Ideal for power applications, it features a self-resonance frequency of 19MHz and operates b/w -40°C to 125°C.
Median Price
$0.406
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.050
100+ parts
$0.710
1k+ parts
$0.542
10k+ parts
-
Chip1Stop
$0.455
Arrow
$0.356
Verical
Bristol Electronics
$1.425
$0.527
$0.399
Vyrian
Nova Conductors
Prism Electronics
Ampacity Inc.
$0.303
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Glotronic Ltd.
ChipTracer
Aranea Global
Easy to mount on PCB without the need for through-hole soldering, saving time and making assembly more efficient.
Helps to reduce electromagnetic interference (EMI), improving overall performance and reliability of the circuit.
Allows for flexibility in circuit design and easy connection to other components.
Indicates the frequency at which the inductor was tested, providing a reference point for its performance.
Specific size code for easy identification and compatibility with corresponding components.
Rectangular shape makes it easier to place and secure on the PCB.
Secure packing method to prevent damage during shipping and storage.
Designed specifically for power applications, ensuring efficient power transfer and handling high currents.
Compact and space-saving design for easy integration into various electronic devices.
Standard number of terminals for easy connection in circuits.
Surface mount technology for easy and secure attachment to the PCB.
Optimal inductance value for various applications, ensuring consistent performance.
Wraparound terminals provide a secure connection and ease of soldering.
Can operate at high temperatures without compromising performance or reliability.
Capable of handling high currents, ideal for power-related applications.
Can withstand low temperatures, making it suitable for a wide range of operating environments.
Durable finish for long-lasting performance and easy soldering.
Versatile inductor suitable for a wide range of applications, providing flexibility in circuit design.
High self-resonance frequency indicates good performance at high frequencies.
Low resistance for efficient power transfer and minimal power loss.
Ferrite core for high magnetic permeability and low core losses, improving overall inductor efficiency.
Compact height for easy integration into space-constrained electronic devices.
Indicates the accuracy of the DC resistance measurement, ensuring consistent performance.
Tight tolerance for reliable and consistent performance in various operating conditions.
Optimal length for compatibility with standard PCB layouts and designs.
Compact width for easy placement and integration into electronic devices.
Fixed Inductors SRR1806-100M attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
SRR1806-100M Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - Magnetic products Oct/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
Cheng-yi Electronic
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002,215
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
NLCV32T-100K-PFRD
TDK
GENERAL PURPOSE INDUCTOR;
NRS4018T2R2MDGJV
Taiyo Yuden
NRS4018T2R2MDGJV by Taiyo Yuden is a surface mount fixed inductor with 2.2uH nominal inductance and 2.2A max rated current, suitable for power applications. Featuring a rectangular package with dimensions of 4mm x 4mm x 1.8mm, it operates b/w -40°C to 125°C and has a self-resonance frequency of 60MHz.
MLZ2012N150LTD25
MLZ2012N150LTD25 by TDK is a shielded, surface mount fixed inductor with 15uH nominal inductance and 0.35A max rated current. Ideal for general purpose applications, it features dual-ended terminals, ferrite core material, and operates b/w -55°C to 125°C.
DR74-101-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
XAL4020-102MEC
Coilcraft
Coilcraft XAL4020-102MEC is a shielded, surface mount inductor with 1uH nominal inductance and 9.6A max rated current. Ideal for power applications, it has a self-resonance frequency of 79MHz and operates b/w -40°C to 125°C.
HCM0703-4R7-R
Eaton Corporation
Eaton Corporation's HCM0703-4R7-R is a fixed inductor with 4.7uH nominal inductance, 5.5A max rated current, and -55 to 125°C operating temp range. Ideal for power applications, this chip inductor is surface mountable and shielded, featuring dual-ended terminals for efficient power management.
B82791H2351N001
B82791H2351N001 by TDK is a fixed inductor with 22000 uH nominal inductance, 1.9 ohm DC resistance, and 0.35 A max rated current. Ideal for power applications, it features a rectangular package with dual in-line terminals suitable for PCB mounting. Operating temperature ranges from -40 to 125 °C.
BRL3225T150K
Taiyo Yuden's BRL3225T150K is a 15uH fixed inductor with dual-ended terminals, suitable for power applications. Featuring a max operating temperature of 105°C and DC resistance of 0.684 ohm, this general-purpose inductor has a self-resonance frequency of 20MHz. Its compact SMT package size (3.2mm x 2.5mm x 1.7mm) makes it ideal for various electronic devices requiring efficient power management.
CKS2125100M-T
CKS2125100M-T by Taiyo Yuden is an 0805 fixed inductor with 10uH nominal inductance, suitable for RF applications. It has a max operating temperature of 85°C and a self-resonance frequency of 24MHz. This surface-mount component features dual-ended terminals and wraparound terminal shape.
74477110
Wuerth Elektronik & Kg
Wurth Elektronik 74477110 is a shielded fixed inductor with dual-ended terminals. It has a nominal inductance of 10uH, max rated current of 5A, and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and WRAPAROUND terminal shape.
PE-0402CD400KTG
Pulse Electronics
PE-0402CD400KTG by Pulse Electronics is a chip inductor with 0.04 uH nominal inductance, 250 MHz test frequency, and 10% tolerance. Ideal for RF applications due to its 2240 MHz self-resonance frequency and dual-ended terminal placement. Suitable for SMT mounting with gold finish terminals.
LQH5BPN4R7NT0L
Murata Manufacturing
Murata Manufacturing's LQH5BPN4R7NT0L is a shielded SMT inductor with 4.7uH nominal inductance, suitable for RF applications. It has a max rated current of 2A, operates b/w -40 to 125°C, and features a ferrite core material.
NLCV32T-100K-PFR
NLCV32T-100K-PFR by TDK is a 10uH power inductor with 2 terminals, WRAPAROUND shape, and 125°C max temp. Ideal for general purpose applications, it has a self-resonance frequency of 30MHz and 0.42 ohm DC resistance.
MLZ2012N150LT000
MLZ2012N150LT000 by TDK is a shielded, surface mount fixed inductor with 15uH nominal inductance and 0.47ohm DC resistance. It operates b/w -55 to 125 °C and has a max rated current of 0.35A. Ideal for general purpose applications requiring compact rectangular package design.
HCM1103-3R3-R
HCM1103-3R3-R by Eaton Corp is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 9A max current rating. Ideal for power applications, it features dual-ended terminals, powdered iron core material, and operates b/w -55°C to 125°C.
NLV32T-1R0J-PF
The TDK NLV32T-1R0J-PF is a 1uH general purpose inductor with dual-ended terminals, suitable for RF applications. Featuring a max operating temperature of 105°C and a self-resonance frequency of 120MHz, this SMT inductor has a DC resistance of 0.7 ohm. Its compact size (3.2mm x 2.5mm x 2.2mm) makes it ideal for space-constrained designs.
K001
Opt Industries
K001 by Opt Industries is a shielded fixed inductor with 2000uH nominal inductance and 1MHz self-resonance frequency. It has 4 terminals, 0.112A max rated current, and is designed for power applications. The cylindrical package with printed wiring pin terminals makes it suitable for general purpose inductor use.
NR3015T2R2M
NR3015T2R2M by Taiyo Yuden is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 1.48A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 64MHz and operates b/w -25°C to 120°C.
NRS4018T220MDGJV
Taiyo Yuden's NRS4018T220MDGJV is a surface mount fixed inductor with 22uH nominal inductance, 0.72A max rated current, and 125°C max operating temp. Ideal for power applications, this general purpose inductor features ferrite core material and dual-ended terminals for efficient performance.
32994
Hirel Systems
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: RECTANGULAR PACKAGE; Maximum Rated Current: 62.2 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SRR1260-330M
Bourns
Bourns SRR1260-330M is a shielded, surface mount inductor with 33uH nominal inductance and 3A max rated current. Ideal for power applications, it features a self-resonance frequency of 9.97MHz and operates b/w -40°C to 125°C temperature range.
SRR1208-100ML
SRR1260-331K
Bourns SRR1260-331K is a shielded, dual-ended fixed inductor with 330uH nominal inductance. Ideal for power applications, it has a max rated current of 1.15A and operates b/w -40 to 125°C. Its compact SMT package measures 12.5mm x 12.5mm x 6mm, making it suitable for general purpose use.
SRR1260-101M
SRR1260-150M
Bourns SRR1260-150M is a shielded fixed inductor with 15uH nominal inductance, 5A max current, and 17.6MHz self-resonance freq. Ideal for power applications due to its compact rectangular SMT package and ferrite core material.
SRR1005-100M
SRR1210-101M
Bourns SRR1210-101M is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 2.5A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals.
SRR1210-680M
SRR1280-330M
SRR1280-101M
The Bourns SRR1280-101M is a shielded, surface mount inductor with 100uH nominal inductance. It has a max rated current of 2.1A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a ferrite core and wraparound terminals.
SRR1206-101YL
SRR1260-471K
SRR1210-470M
SRR1280-3R3Y
Bourns SRR1280-3R3Y is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 8.8A max rated current. Ideal for power applications, it features a ferrite core, 30% tolerance, and operates b/w -40 to 125°C temperatures.
SRR1280-470M
SRR1210-330M
Bourns SRR1210-330M is a shielded, surface mount inductor with 33uH nominal inductance and 4.4A max rated current. Ideal for power applications, it features a self-resonance frequency of 6.5MHz and operates b/w -40°C to 125°C temperature range.
SRR1260-221K
SRR1208-561KL
SRR1280-100M
Bourns SRR1280-100M is a shielded, dual-ended power inductor with 10uH nominal inductance. Operating b/w -40 to 125°C, it has a max current of 6A and DC resistance of 0.0195 ohm. Ideal for general purpose applications requiring a compact SMT package with ferrite core material.
SRR1210-270M
Bourns SRR1210-270M is a shielded, surface mount inductor with 27uH nominal inductance and 5A max rated current. Ideal for power applications, it features a self-resonance frequency of 6.5MHz, -40 to 125°C operating temperature range, and ferrite core material.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved