Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SRR0805-100M is a shielded fixed inductor with 10uH nominal inductance, 1.5A max current, and -40 to 125°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core in a compact SMT package.
Median Price
$0.615
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.740
100+ parts
$0.499
1k+ parts
-
10k+ parts
Mouser Electronics
$0.402
$0.366
Master Electronics
$0.380
$0.329
Verical
$0.490
TTI
Freelance Electronics
$0.256
$0.268
$0.253
Nova Conductors
$0.397
Electro Sonic
$0.342
Vyrian
Prism Electronics
IBS Electronics
$0.520
$0.471
Bristol Electronics
Next Level Components, LLC
Aztec Data Supply Inc.
$0.130
Ampacity Inc.
Aranea Global
$0.389
$0.374
Authorized Procurement Solutions
Surface mount technology allows for easy and efficient placement on PCBs, making installation quick and convenient.
Shielding helps protect against electromagnetic interference, improving overall performance and reliability.
Dual ended terminals provide flexibility in circuit design and allow for easy connection.
With a nominal inductance of 10 uH, this inductor is suitable for a range of power applications.
The high maximum rated current allows for efficient power handling without risk of damage.
Low DC resistance ensures minimal power loss and efficient operation.
Ferrite core material offers high magnetic permeability, making this inductor suitable for power applications.
Fixed Inductors SRR0805-100M attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
SRR0805-100M Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - Mult Series Location 04/Dec/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
Bytesonic Electronics
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
CTX100-10-52LP-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
DR125-100-R
Eaton Corporation
Eaton Corporation's DR125-100-R is a shielded, surface mount fixed inductor with 10uH nominal inductance. It has a max rated current of 5.35A and operates b/w -40 to 125°C, making it ideal for power applications requiring general purpose inductors.
SRR0603-101KL
Bourns
The Bourns SRR0603-101KL is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.5 ohm DC resistance. It is a general purpose inductor suitable for power applications, featuring a self-resonance frequency of 9MHz and operating temperature range from -40°C to 125°C.
CTX100-5-52M-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
DR0810-332L
Coilcraft
Coilcraft's DR0810-332L is a 3.3uH general purpose inductor with max current of 9.5A and self-resonance at 47MHz. Ideal for power applications, it has radial terminals, operates b/w -40 to 85°C, and features a cylindrical package measuring 12mm x 10.5mm.
NLV25T-R47J-PF
TDK
NLV25T-R47J-PF by TDK is a 1008-sized fixed inductor with 0.47uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and magnetic shielding, it operates at -40 to 105°C with a max current of 0.35A. Ideal for general purpose use, this SMT inductor has a self-resonance frequency of 350MHz and DC resistance of 0.68 ohm.
B78108S1104J000
TDK B78108S1104J000 is a 100uH general purpose RF inductor with 0.8mm lead diameter. It operates b/w -55 to 125°C, has 1.7ohm DC resistance, and self-resonance frequency of 5MHz. Ideal for applications requiring high Q factor and reliability in tubular package design.
NRS6045T100MMGKV
Taiyo Yuden
NRS6045T100MMGKV by Taiyo Yuden is a surface mount fixed inductor with a nominal inductance of 10 uH. It has a max rated current of 2.4 A and can operate at temperatures ranging from -40 to 125 °C. This general purpose inductor is commonly used for power applications.
LQW15AN6N2C00D
Murata Manufacturing
Murata Manufacturing's LQW15AN6N2C00D is a wirewound chip inductor with 0.0062 uH nominal inductance, 8000 MHz self-resonance frequency, and 3.23% tolerance. Ideal for RF applications due to its high Q factor at 250 MHz test frequency. Surface mount design with dual-ended terminals makes it suitable for compact electronic devices.
#919AS-1R0N=P3
Toko
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Maximum Rated Current: 9.7 A; Manufacturer Series: D104C;
P0848NL
Pulse Electronics
Pulse Electronics P0848NL is a fixed inductor with 50uH nominal inductance, 5A max current, and -40 to 130°C operating temp. Ideal for power applications, it features radial terminal placement, toroid construction, and a rectangular package design.
PE-53808SNL
PE-53808SNL by Pulse Electronics is a fixed inductor with 374uH nominal inductance, 2.7 ohm DC resistance, and 0.2A max rated current. It is a toroid construction power inductor for general purpose applications, featuring dual-ended terminals and a rectangular SMT package.
B82141A1104J000
B82141A1104J000 by TDK is a 100uH general purpose inductor with 0.6mm lead diameter and axial terminal placement. It operates b/w -55°C to 125°C, has a max rated current of 0.17A, and features a self-resonance frequency of 5.3MHz. Ideal for RF applications due to its tubular construction and ferrite core material.
IHLP5050FDER100M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Tolerance: 20 %;
N1342AAA-0001Z=P3
GENERAL PURPOSE INDUCTOR; Manufacturer Series: FSDVA;
7447709680
Wuerth Elektronik & Kg
7447709680 by Wurth Elektronik is a surface mount, shielded fixed inductor with a nominal inductance of 68 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 3.2 A and an operating temperature range from -40 to 125 °C.
DR74-101-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
305-8
West Coast Magnetics
West Coast Magnetics' 305-8 is a choke coil inductor with 27.9uH nominal inductance, 18A max current rating, and 0.025ohm DC resistance. Ideal for general purpose applications requiring high current handling capabilities in compact spaces.
3615A100K
TE Connectivity
TE Connectivity's 3615A100K is a surface mount fixed inductor with dual-ended terminals, ideal for RF applications. It offers a nominal inductance of 10uH, max operating temperature of 100°C, and self-resonance frequency of 42MHz. This general-purpose inductor has a compact rectangular package measuring 13mm x 5mm x 5.3mm.
VLCF4020T-100MR85
VLCF4020T-100MR85 by TDK is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.22A max rated current. Ideal for power applications, this general purpose inductor has a compact 4020 size package and operates b/w -40 to 105°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SRR0604-101KL
SRR0603-220ML
Bourns SRR0603-220ML is a shielded, surface mount inductor with 22uH nominal inductance and 0.7A max current rating. Ideal for power applications, it features a ferrite core, 20% tolerance, and operates b/w -40°C to 125°C.
SRR0603-470KL
SRR0735A-100M
SRR0603-4R7ML
SRR0604-100ML
The Bourns SRR0604-100ML is a surface mount, shielded fixed inductor with dual-ended terminal placement. It has a nominal inductance of 10 uH and can handle a max rated current of 1.3 A. This general purpose inductor is commonly used for power applications.
SRR0805-2R2M
SRR0805-120M
SRR0604-2R2ML
SRR0604-2R2ML by Bourns is a surface mount, shielded fixed inductor with a nominal inductance of 2.2 uH and max rated current of 2.5 A. It is commonly used as a power inductor for general purpose applications due to its compact rectangular package and high self-resonance frequency of 100 MHz.
SRR0603-221KL
SRR0603-221KL by Bourns is a surface mount, shielded fixed inductor with a nominal inductance of 220 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.2 A and a self-resonance frequency of 5 MHz.
SRR0603-3R3ML
SRR0603-100ML
Bourns SRR0603-100ML is a shielded fixed inductor with 10uH nominal inductance, 1.1A max current, and 25MHz self-resonance freq. Ideal for power applications, it's a surface mount component with dual-ended terminals and ferrite core material.
SRR0805-102K
Bourns SRR0805-102K is a shielded fixed inductor with 1000uH nominal inductance, 125°C max operating temp, and 10% tolerance. Ideal for power applications, it features dual-ended terminals, matte tin finish over nickel, and ferrite core material.
SRR0805-270Y
Bourns SRR0805-270Y is a shielded fixed inductor with 27uH nominal inductance, 1A max current, and -40 to 125°C operating temp. Ideal for power applications, it features dual-ended terminals and ferrite core in a compact SMT package.
SRR0604-4R7ML
SRR0603-330KL
Bourns SRR0603-330KL is a shielded, surface mount fixed inductor with 33uH nominal inductance. Ideal for power applications, it has a max rated current of 0.6A and operates b/w -40°C to 125°C. Its compact size (6.5mm x 6.5mm x 3.1mm) makes it suitable for various general purpose inductor needs.
SRR0805-150M
SRR0905-471K
SRR0805-101K
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved