Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SRP1265A-8R2M is a shielded, surface mount fixed inductor with 8.2uH nominal inductance and 10.5A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 11MHz.
Median Price
$0.703
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Newark
1+ parts
$1.530
100+ parts
$1.130
1k+ parts
-
10k+ parts
TTI Europe
$0.648
$0.624
Farnell
$0.773
$0.674
Element14
$1.300
$1.140
Chip1Stop
Arrow
Verical
Electro Sonic
$0.744
$0.667
Nova Conductors
A2Z Electronics, Inc.
Bristol Electronics
Continental Prestige Electronics
$1.420
$0.705
$0.593
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Netroflash
Perfect Parts
Being surface mount compatible makes it easy to integrate this inductor into circuit boards, saving space and simplifying assembly processes.
The shielding helps to reduce electromagnetic interference, ensuring reliable performance in sensitive electronic devices.
Dual ended terminal placement provides flexibility in connection options, allowing for easier integration into various circuit designs.
The inductor's nominal inductance value of 8.2uH indicates its ability to store energy efficiently and effectively in applications where this value is required.
With a high maximum rated current, this inductor can handle heavy loads without overheating or performance degradation.
The high self-resonance frequency of 11MHz indicates good performance at high frequencies, making it suitable for applications where such performance is required.
Fixed Inductors SRP1265A-8R2M attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
SRP1265A-8R2M Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - Multiple Devices Marking Ink Material 11/Dec/2020
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hy Electronic
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
NXP Semiconductors
1554216002
Molex
WIRE AND CABLE;
DR74-101-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQW15AN47NJ00D
Murata Manufacturing
LQW15AN47NJ00D by Murata is a wirewound chip inductor with 0.047 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 2900 MHz. With dual-ended terminals and compact 0402 size, it is ideal for surface mount designs requiring high-quality factor components.
HK100515NJ-T
Taiyo Yuden
HK100515NJ-T by Taiyo Yuden is a 0402 multilayer chip inductor with 0.015 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C, self-resonance frequency of 2300 MHz, and DC resistance of 0.46 ohm. Ideal for general purpose use due to its compact size and high quality factor.
5625
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: CYLINDRICAL PACKAGE;
NRS4012T1R0NDGG
NRS4012T1R0NDGG by Taiyo Yuden is a SMT fixed inductor with 1uH nominal inductance, 2.2A max current, and 100MHz self-resonance freq. Ideal for power applications due to its general purpose design, ferrite core material, and compact rectangular package measuring 4x4x1.2mm.
VLS6045EX-100M
TDK
VLS6045EX-100M by TDK is a shielded, surface mount fixed inductor with 10uH nominal inductance and 3.4A max rated current. Ideal for power applications, it features a rectangular package, ferrite core material, and operates b/w -40°C to 105°C temperature range.
74408942047
Wuerth Elektronik & Kg
Wurth Elektronik 74408942047 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 1.55A max rated current. Ideal for power applications, this SMT inductor has a rectangular package measuring 4.8mm x 4.8mm x 2.8mm, operating b/w -40°C to 125°C with a DC resistance of 0.103 ohm at a self-resonance frequency of 38MHz.
7447709004
Wurth Elektronik 7447709004 is a shielded SMT inductor with 4.7uH nominal inductance, ideal for power applications. It has a max rated current of 9.3A and operates b/w -40 to 125°C, featuring a nickel-zinc core material and wraparound terminals.
SRN8040-3R3Y
Bourns
Bourns SRN8040-3R3Y is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 5.6A max rated current. Ideal for power applications, it features a self-resonance frequency of 34MHz and operates b/w -40°C to 125°C temperature range.
5714
The Bourns 5714 is a fixed inductor with a nominal inductance of 1250 uH and max rated current of 1.75 A. It features radial terminal placement, toroidal construction, and is ideal for high current applications. With a DC resistance of 0.85 ohm, it operates b/w -55 to 105 °C, making it suitable for general purpose inductor needs.
LQH32CN221K23L
Murata Manufacturing's LQH32CN221K23L is a 220uH fixed inductor with dual-ended terminals, suitable for RF applications. Featuring a self-resonance frequency of 6.8MHz and max rated current of 0.07A, this SMT inductor has a compact size of 3.2mm x 2.5mm x 2mm, making it ideal for general purpose use in electronic circuits.
SD53-101-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES; Package Width: 5.2 mm;
LQW2UAS1R5J00L
Murata Manufacturing's LQW2UAS1R5J00L is a 1.5uH chip inductor with dual-ended terminals, suitable for RF applications. It has a max operating temperature of 125°C and a DC resistance of 2.3 ohm, making it ideal for general purpose use at self-resonance frequency of 120 MHz.
4622
The Bourns 4622 is a wirewound fixed inductor with 10uH nominal inductance, suitable for RF applications. It has a max operating temperature of 105°C and rated current of 1.5A, making it ideal for general purpose use in electronics. With a self-resonance frequency of 40MHz and construction using iron core material, it offers high quality factor and performance.
MLZ2012N100LT000
MLZ2012N100LT000 by TDK is a 0805 fixed inductor with 10uH nominal inductance, 0.3 ohm DC resistance, and 20% tolerance. It is a general purpose inductor suitable for various applications requiring a max rated current of 0.5A and operating temperatures ranging from -55 to 125 °C.
7445110
Wurth Elektronik 7445110 is a shielded fixed inductor with 10uH nominal inductance, 1A max current, and 30MHz self-resonance freq. Ideal for power applications, it's a dual-ended SMT component with gold terminals, operating from -40 to 125°C.
SCD0504T101K-N
Yageo
Yageo's SCD0504T101K-N is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 10% tolerance. It is a general purpose power inductor suitable for applications requiring magnetic shielding and operating temperatures from -40 to 85°C.
74438336100
Wuerth Elektronik & Kg 74438336100 is a shielded, surface mount fixed inductor with dual-ended terminals. Featuring 10uH nominal inductance, 1.2A max rated current, and -40 to 125°C operating temperature range. Ideal for power applications requiring a general purpose inductor with a compact rectangular package design.
IHLP2020BZER4R7M01
Vishay Intertechnology
Vishay Intertechnology's IHLP2020BZER4R7M01 is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 2.8A max rated current. Ideal for high current applications, this rectangular package has a self-resonance frequency of 28MHz and operates b/w -55°C to 125°C.
5106
Frontier Electronics
GENERAL PURPOSE INDUCTOR; Inductor Application: FILTER CHOKE; No. of Terminals: 4; Shielded: NO; Surface Mount: NO; Terminal Placement: ON CIRCLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SRP1265A-470M
Bourns SRP1265A-470M is a shielded SMT inductor with 47uH nominal inductance, 6.5A max current, and 150°C max operating temp. Ideal for power applications due to its high quality factor and AEC-Q200 reference standard compliance.
SRP1265A-330M
Bourns SRP1265A-330M is a shielded SMT inductor with 33uH nominal inductance, 8A max current, and 150°C max operating temp. Ideal for power applications, it features dual-ended terminals and AEC-Q200 compliance.
SRP1265A-4R7M
Bourns SRP1265A-4R7M is a shielded SMT power inductor with 4.7uH nominal inductance, 13.5A max current, and 150°C max operating temp. Ideal for general purpose applications requiring high quality factor and self-resonance frequency of 17MHz.
SRP1265A-220M
Bourns SRP1265A-220M is a shielded, surface mount fixed inductor with 22uH nominal inductance. It has a max rated current of 9A and operates at temperatures ranging from -55 to 150°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 6MHz and DC resistance of 37 ohm.
SRP1265A-100M
SRP1038A-100M
Bourns SRP1038A-100M is a surface mount, shielded fixed inductor with 10uH nominal inductance and 7.5A max rated current. It is a general purpose inductor suitable for power applications, with a self-resonance frequency of 10MHz and operating temperature range from -55 to 150 °C.
SRP1038A-220M
Bourns SRP1038A-220M is a shielded, dual-ended surface mount inductor with 22uH nominal inductance and 5A max rated current. Ideal for power applications, it operates b/w -55 to 150°C, with a self-resonance frequency of 8MHz.
SRP1038A-2R2M
SRP1038C-100M
SRP1238A-1R0M
SRP1265A-3R3M
Bourns SRP1265A-3R3M is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 18A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 20MHz.
SRP1270-100M
Bourns' SRP1270-100M is a shielded, dual-ended SMT inductor with 10uH nominal inductance, 10A max current, and 125°C max operating temp. Ideal for power applications due to its general purpose design and compact rectangular package (12.9mm x 12.9mm x 7mm).
SRP1265A-6R8M
Bourns SRP1265A-6R8M is a shielded, surface mount fixed inductor with 6.8uH nominal inductance and 11.5A max rated current. Ideal for power applications, it operates b/w -55 to 150°C, with a self-resonance frequency of 13MHz.
SRP1770TA-101M
The Bourns SRP1770TA-101M is a surface mount, shielded fixed inductor with a nominal inductance of 100 uH. It has a max rated current of 5.3 A and can operate at temperatures up to 150 °C. This general purpose inductor is commonly used for power applications.
SRP1038A-4R7M
SRP1265A-1R5M
SRP1038A-470M
SRP1250-2R2M
SRP1038A-150M
SRP1250-100M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved