Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns SRP1038AA-2R2M is a shielded SMT inductor with 2.2uH nominal inductance, 15 ohm DC resistance, and 155°C max operating temp. Ideal for power applications, it features dual-ended terminals and AEC-Q200 reference standard compliance.
Median Price
$1.000
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$0.129
100+ parts
$0.120
1k+ parts
-
10k+ parts
Farnell
$0.976
$0.658
$0.573
Chip1Stop
$0.636
DigiKey
$1.200
$0.815
$0.754
Mouser Electronics
$0.647
$0.625
Newark
$1.340
$0.956
$0.788
$0.766
RS (Exports)
$0.688
$0.574
Element14
$1.130
$0.978
Verical
Nova Conductors
Continental Prestige Electronics
$0.475
$0.420
$0.395
Ampacity Inc.
$0.510
Aranea Global
Being surface mount allows for easier and more convenient assembly onto circuit boards, saving time and effort.
Shielded construction helps minimize electromagnetic interference, ensuring stable performance in electronic circuits.
Dual ended terminals allow for flexibility in circuit design and easier integration into various types of circuits.
Tested at a frequency of 0.1 MHz, ensuring accurate performance within this frequency range.
Ideal for power inductor applications requiring a nominal inductance of 2.2 microhenries.
With a high maximum operating temperature of 155°C, this inductor can withstand high heat environments.
Capable of handling a maximum rated current of 0.0067 amps, suitable for various power applications.
With a low minimum operating temperature of -55°C, this inductor can operate in cold environments.
Designed as a general purpose inductor for versatile use in different electronic circuits and applications.
With a self-resonance frequency of 26 MHz, this inductor is suitable for high frequency applications.
Low DC resistance of 15 ohms minimizes power loss and heat generation in the circuit.
The metal alloy powder core material offers high efficiency and performance in a compact package.
With a 20% tolerance, this inductor provides consistent and reliable performance within specified parameters.
Compliance with AEC-Q200 ensures reliable performance in automotive applications and harsh environments.
Fixed Inductors SRP1038AA-2R2M attributes and parameters. Explore more Fixed Inductors devices from Bourns
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
Reference Standard:
SRP1038AA-2R2M Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Telcom Semiconductor
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
XFL4020-472MEC
Coilcraft
Coilcraft XFL4020-472MEC is a shielded, surface mount inductor with 4.7 uH nominal inductance and 5A max rated current. Ideal for power applications, it has a self-resonance frequency of 26 MHz and operates b/w -40 to 125 °C.
SRU1038-101Y
Bourns
Bourns SRU1038-101Y is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 6MHz.
DFE201612E-2R2M=P2
Toko
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQH66SN3R3M03L
Murata Manufacturing
Murata Manufacturing's LQH66SN3R3M03L is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 2.6A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 40MHz and operates b/w -40 to 80°C temperatures.
LQW2UAS1R5J00L
Murata Manufacturing's LQW2UAS1R5J00L is a 1.5uH chip inductor with dual-ended terminals, suitable for RF applications. It has a max operating temperature of 125°C and a DC resistance of 2.3 ohm, making it ideal for general purpose use at self-resonance frequency of 120 MHz.
DRA127-330-R
Eaton Corporation
Eaton Corporation's DRA127-330-R is a shielded, surface mount fixed inductor with 32.01uH nominal inductance and 3.22A max rated current. Ideal for power applications, this general purpose inductor has dual-ended terminals and operates b/w -40 to 165°C.
IHLP5050FDER3R3M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Core Material: COMPOSITE;
DR125-470-R
Cooper Industries
CTX100-2-52LP-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
7447779122
Wuerth Elektronik & Kg
Wurth Elektronik 7447779122 is a shielded fixed inductor with 22uH nominal inductance, suitable for power applications. It has a max rated current of 1.41A and operates b/w -40 to 125°C. Ideal for general purpose use, this SMT inductor features nickel-zinc ferrite core material and dual-ended terminals.
IHLP2020CZER2R2M01
Vishay Intertechnology
The Vishay Intertechnology IHLP2020CZER2R2M01 is a surface mount, shielded fixed inductor with a nominal inductance of 2.2 uH and max rated current of 5.8 A. It is designed for high current applications and has a compact rectangular package size of 2020, making it suitable for various electronic devices.
ARA00499
Tdk-lambda
GENERAL PURPOSE INDUCTOR; No. of Terminals: 4; Package Style (Meter): PCB Mount; Shielded: NO; Surface Mount: NO; Package Height: 29 mm;
XAL4040-103MEC
Coilcraft's XAL4040-103MEC is a shielded, surface mount inductor with 10uH nominal inductance and 3.1A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 24MHz and DC resistance of 0.0924 ohm.
3613C101K
Meggitt Electronic Components
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Shape or Size Description: RECTANGULAR PACKAGE;
7447714330
Wurth Elektronik 7447714330 is a shielded, dual-ended power inductor with 33uH nominal inductance. It has a max rated current of 2.5A and operates b/w -40 to 150°C. Ideal for general purpose applications requiring high-frequency performance and compact size.
2312-H-RC
The Bourns 2312-H-RC is a shielded fixed inductor with 100uH nominal inductance, suitable for high current applications. It has a max rated current of 7A, DC resistance of 0.037 ohm, and operates b/w -55 to 105°C. Ideal for general purpose use due to its radial terminal placement and toroidal package style.
1501
Hammond Manufacturing
GENERAL PURPOSE INDUCTOR; Inductor Application: RF CHOKE; No. of Terminals: 2; Package Style (Meter): Axial; Shielded: NO; Surface Mount: NO;
XFL2006-333MEC
Coilcraft XFL2006-333MEC is a shielded SMT inductor with 33uH nominal inductance, 4.9 ohm DC resistance, and 24 MHz self-resonance frequency. Ideal for power applications, it operates b/w -40 to 85°C with a max current of 0.205A.
SRR0603-220ML
Bourns SRR0603-220ML is a shielded, surface mount inductor with 22uH nominal inductance and 0.7A max current rating. Ideal for power applications, it features a ferrite core, 20% tolerance, and operates b/w -40°C to 125°C.
IHLP5050FDER100M01
Vishay Intertechnology's IHLP5050FDER100M01 is a shielded, surface mount fixed inductor with 10uH nominal inductance and 10A max rated current. Ideal for power applications, it features a composite core material, operates b/w -55°C to 125°C, and has a compact 5050 case size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SRP1265A-470M
Bourns SRP1265A-470M is a shielded SMT inductor with 47uH nominal inductance, 6.5A max current, and 150°C max operating temp. Ideal for power applications due to its high quality factor and AEC-Q200 reference standard compliance.
SRP1265A-330M
Bourns SRP1265A-330M is a shielded SMT inductor with 33uH nominal inductance, 8A max current, and 150°C max operating temp. Ideal for power applications, it features dual-ended terminals and AEC-Q200 compliance.
SRP1265A-4R7M
Bourns SRP1265A-4R7M is a shielded SMT power inductor with 4.7uH nominal inductance, 13.5A max current, and 150°C max operating temp. Ideal for general purpose applications requiring high quality factor and self-resonance frequency of 17MHz.
SRP1265A-220M
Bourns SRP1265A-220M is a shielded, surface mount fixed inductor with 22uH nominal inductance. It has a max rated current of 9A and operates at temperatures ranging from -55 to 150°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 6MHz and DC resistance of 37 ohm.
SRP1265A-100M
SRP1038A-100M
Bourns SRP1038A-100M is a surface mount, shielded fixed inductor with 10uH nominal inductance and 7.5A max rated current. It is a general purpose inductor suitable for power applications, with a self-resonance frequency of 10MHz and operating temperature range from -55 to 150 °C.
SRP1038A-220M
Bourns SRP1038A-220M is a shielded, dual-ended surface mount inductor with 22uH nominal inductance and 5A max rated current. Ideal for power applications, it operates b/w -55 to 150°C, with a self-resonance frequency of 8MHz.
SRP1038A-2R2M
SRP1038C-100M
SRP1238A-1R0M
SRP1265A-3R3M
Bourns SRP1265A-3R3M is a shielded, surface mount fixed inductor with 3.3uH nominal inductance and 18A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 20MHz.
SRP1270-100M
Bourns' SRP1270-100M is a shielded, dual-ended SMT inductor with 10uH nominal inductance, 10A max current, and 125°C max operating temp. Ideal for power applications due to its general purpose design and compact rectangular package (12.9mm x 12.9mm x 7mm).
SRP1265A-6R8M
Bourns SRP1265A-6R8M is a shielded, surface mount fixed inductor with 6.8uH nominal inductance and 11.5A max rated current. Ideal for power applications, it operates b/w -55 to 150°C, with a self-resonance frequency of 13MHz.
SRP1770TA-101M
The Bourns SRP1770TA-101M is a surface mount, shielded fixed inductor with a nominal inductance of 100 uH. It has a max rated current of 5.3 A and can operate at temperatures up to 150 °C. This general purpose inductor is commonly used for power applications.
SRP1038A-4R7M
SRP1265A-1R5M
SRP1038A-470M
SRP1250-2R2M
SRP1038A-150M
SRP1250-100M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved