Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 1500 V; No. of Functions: 2; Height: 4.1 mm; Width: 10.3 mm;
Median Price
$3.000
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
$1.604
100+ parts
$1.505
1k+ parts
$1.456
10k+ parts
Mouser Electronics
$2.140
$2.130
Chip1Stop
$3.130
-
Newark
$5.530
Element14
$5.690
$3.340
$3.240
Farnell
$2.340
$1.870
Verical
Authorized Procurement Solutions
Pulse & Datacom Transformers SM43001EL attributes and parameters. Explore more Pulse & Datacom Transformers devices from Bourns
Application:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Inductance (Primary):
Transformer Type:
Width:
SM43001EL Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
Sensitron Semiconductor
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Diodes Incorporated
78601/9C
Murata Manufacturing
Murata Manufacturing's 78601/9C is a pulse transformer with 10000 uH primary inductance, 1000 V isolation voltage, and 56 V-us min ET product. It is used for datacom applications due to its through-hole mounting feature and compact dimensions of 6.35mm x 9mm x 9.52mm.
HM2101NLT
Pulse Electronics
HM2101NLT by Pulse Electronics is a DATACOM TRANSFORMER with 150uH inductance, 4300V isolation voltage, and AEC-Q200 approval. It is ideal for surface mount applications in data communication and pulse transmission systems.
HM1188NLT
HM1188NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1:1 Turns Ratio, 1500V Isolation Voltage, and 350uH Primary Inductance. It is AEC-Q200 approved for automotive applications, operates b/w -40°C to 105°C, and has compact dimensions suitable for surface mount installations.
HX2019FNL
HX2019FNL by Pulse Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 1.2dB insertion loss, and 350uH inductance. Ideal for surface mount applications in data communication systems due to its compact size (12.7mm x 9.09mm x 5.99mm) and operating temperature range (-40°C to 85°C).
PA2002NLT
PA2002NLT by Pulse Electronics is a pulse transformer with 3 functions, 1500V isolation voltage, and 60ns max pulse rise time. Ideal for gate drive applications, it operates b/w -40 to 130°C and has dimensions of L9.02xB8.64xH7.62mm for surface mounting.
IT314
Schaffner Holding Ag
IT314 by Schaffner Holding Ag is a Pulse Transformer with 1000 ns max pulse rise time, 35000 uH primary inductance, and dimensions of L25.5xB25.5xH25.0 mm. It is designed for GATE DRIVE applications, operates b/w -25 to 70 °C, and features a turns ratio of 3:1:1 for through hole mounting.
HM2113ZNLT
HM2113ZNLT by Pulse Electronics is a DATACOM TRANSFORMER with 150uH primary inductance and 4300V isolation voltage. It operates b/w -40 to 125 °C, making it ideal for AEC-Q200 approved applications requiring high voltage isolation and compact surface mount design.
1024
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
IT239
IT239 by Schaffner Holding Ag is a UL-approved pulse transformer with 1000V isolation voltage and 2300ns max pulse rise time. With primary inductance of 3000uH, it's ideal for applications requiring high ET product of 300 V-us. This through-hole mounted transformer operates b/w -25°C to 70°C, making it versatile for various electronic devices.
TG110-E050N5RL
Halo Electronics
TG110-E050N5RL by Halo Electronics is a Pulse & Datacom Transformer with 1500V isolation voltage. It has 2 functions, 0.4uH primary inductance, and 1CT:1CT turns ratio. Ideal for applications like 10/100 BASE-TX and ETHERNET due to its compact dimensions of L12.7xB7.11xH6.35 mm and surface mounting feature.
HM6098NL
HM6098NL by Pulse Electronics is a DATACOM TRANSFORMER with 4 functions and an isolation voltage of 1500V. Featuring inductance of 120uH, it operates b/w -40°C to 105°C. Ideal for applications requiring surface mount transformers with a turns ratio of 1:1.
750311594
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 750311594 is a Pulse & Datacom Transformer with 1500V isolation voltage, 15uH inductance, and 3.8A output current. Ideal for data communication applications due to its surface mounting feature and dimensions of L32.31xB27.03xH13.69 (mm).
100B-1003XNL
Inrcore
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Width: 6.98 mm; Length: 12.95 mm; Dimensions: L12.7XB6.73XH5.97 (mm);
ALT4532V-201-T001
TDK
TDK's ALT4532V-201-T001 is a DATACOM TRANSFORMER for LAN applications with 200uH inductance. It has AEC-Q200 approval, operates b/w -40 to 105 °C, and features 1CT:1CT turns ratio. Ideal for 10/100/1000 BASE-T networks, it is compact at L4.5xB3.2xH2.9 mm and mounts easily on surfaces.
749020310
Wurth Elektronik 749020310 is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN applications at temperatures ranging from -40 to 85°C. Compact design with dimensions of 17.53mm x 14.6mm x 4.5mm for surface mount installation.
PE-68386NL
PE-68386NL by Pulse Electronics is a pulse transformer with 1500V isolation voltage, 785uH primary inductance, and 9.7 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 130 °C at a frequency of 50 KHz.
HX1188NL
HX1188NL by Pulse Electronics is a Datacom Transformer with an Isolation Voltage of 1650V, Inductance of 350uH, and Turns Ratio of 1:1. It is designed for surface mount applications in data communication and networking equipment due to its compact dimensions (L12.7xB7.11xH5.97 mm) and wide operating temperature range (-40 to 85°C).
78602/1JC-R
Murata Manufacturing's 78602/1JC-R is a pulse transformer with 1000V isolation voltage, 1890uH inductance, and 20 V-us min ET product. Ideal for datacom applications, it comes in tape & reel packing, measures L9.52xB9.0xH6.65 mm, and operates b/w -40 to 85°C temperatures.
78601/16JC
Murata Manufacturing's 78601/16JC is a pulse transformer with 1000V isolation voltage, 3650uH inductance, and 28 V-us min ET product. It is a surface mount type used for datacom applications due to its compact size and balanced turns ratio of 1:1.
M21038/27-05
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038/27; Length: 12.7 mm; Minimum Operating Temperature: -55 Cel; Dimensions: L12.7XB8.89XH6.35 (mm);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Bourns
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved