Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: PCB MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 150 Cel; Tolerance: 10 %;
Median Price
$6.760
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Master Electronics
1+ parts
$6.740
100+ parts
$5.170
1k+ parts
$4.700
10k+ parts
-
Mouser Electronics
$6.210
Verical
$9.570
$7.960
$7.740
Arrow
Avnet
$4.615
Freelance Electronics
$4.614
Component Electronics Inc.
$5.380
$4.040
$3.500
TEDSS.com
$10.000
QIE Inc.
Connector Distribution Corp
Right Parts Inc.
Resion
R&J Components
Electronics Depot
Electronic Expediters
Mil-Aero Solutions, Inc.
Odi Ramu Company
Neutron USA
$44.990
Perfect Parts
GreenTree Electronics
Speed Components Ltd (Excess)
Variable Resistors RJR26FW104P attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
RJR26FW104P Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
NSN
5905-01-084-2844, 5905010842844, 5905-01-204-0414, 5905012040414
NIIN
010842844, 012040414
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Shenzhen Socay Electronics
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
3590S-4-103L
Bourns
The Bourns 3590S-4-103L is a wire wound potentiometer with a resistance of 10k ohm, 5% tolerance, and a rated power dissipation of 2W. It is commonly used in panel mount applications where precise resistance adjustment is required.
3362P-1-103LF
Bourns 3362P-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, linear law, and 10% tolerance. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mount applications requiring precise resistance adjustments in a compact rectangular package.
T93XA201KT20
Vishay Intertechnology's T93XA201KT20 is a 200 ohm linear trimmer resistor with 21 turns and 10% tolerance. It operates b/w -55 to 125 °C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The resistor features a CERMET technology construction with a max power dissipation of 0.5 W.
RJS3K5E
Ohmite Manufacturing
The Ohmite Manufacturing RJS3K5E is a 3500 ohm linear wire wound potentiometer with 10% tolerance. Featuring a shaft actuator and panel mount package style, it has a rated power dissipation of 50W. Ideal for applications requiring precise resistance adjustment in horizontal orientation.
RRS1K0
Ohmite Manufacturing's RRS1K0 is a 500W POTENTIOMETER with LINEAR Law Of Resistance. It features HORIZONTAL Actuator orientation, WIRE WOUND technology, and 10% Tolerance. Ideal for applications requiring precise resistance adjustment in panel mount setups.
89PR10KLF
Tt Electronics Plc
89PR10KLF by Tt Electronics Plc is a CERMET variable resistor with 10000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mount applications due to its rectangular package shape and through-hole mounting type.
P160KNP-0EC15B100K
P160KNP-0EC15B100K by Tt Electronics Plc is a 100k ohm linear conductive plastic rotary potentiometer with 3 terminals. It has a 260° angle of rotation, suitable for PCB mount applications. With a rated power dissipation of 0.2W and operating temperature range from -20 to 70 °C, it's ideal for precise control in various electronic devices.
3386F-1-104TLF
Bourns 3386F-1-104TLF is a CERMET trimmer resistor with 100k ohm resistance, 10% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments with operating range from -55 to 125°C. Features linear resistance law and vertical actuator orientation for precise adjustments.
RK2711120026
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
PS60-10MC1BR5K
PS60-10MC1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.2 W power dissipation. It is designed for PCB mounting applications requiring a vertical slide actuator in through-hole mount construction.
3361P-1-103GLF
Bourns 3361P-1-103GLF is a linear trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments.
CMU1511E
The Ohmite Manufacturing CMU1511E is a 150 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 2W and operates b/w -55°C to 120°C. Ideal for panel mount applications, this circular package resistor features a shaft actuator and horizontal orientation.
51CAD-E24-A15L
The Bourns 51CAD-E24-A15L is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 1W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -40 to +125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package.
SM-42TW104
Nidec Copal Electronics
The Nidec Copal Electronics SM-42TW104 is a 100000 ohm linear trimmer resistor with 11 turns and CERMET technology. It has a temperature coefficient of 100 ppm/°C and operates b/w -65 to 150 °C, making it ideal for precise voltage adjustments in electronic circuits. This surface mount device with J BEND terminals is commonly used in applications requiring accurate resistance control at temperatures up to 85 °C.
23ESB105MMF50NF
TE Connectivity's 23ESB105MMF50NF is a logarithmic carbon film potentiometer with 1000000 ohm resistance, 20% tolerance, and 0.4 W power dissipation. It features a circular package, horizontal actuator orientation, and shaft actuator type. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3852A-287-103AL
Bourns 3852A-287-103AL is a linear potentiometer with 10000 ohm resistance, 10% tolerance, and 2W power dissipation. It has a temperature coefficient of 150 ppm/°C and operates b/w -1 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a cylindrical package.
3306K-1-503
Bourns 3306K-1-503 is a CERMET trimmer resistor with 50k ohm resistance, 25% tolerance, and 0.2W power dissipation. It operates b/w -25°C to 100°C, suitable for PCB mounting applications requiring precise resistance adjustments in a compact rectangular package. The linear law of resistance and screw actuator make it ideal for fine-tuning circuits with a wide operating voltage range up to 100V.
3299X-1-201LF
Bourns 3299X-1-201LF is a CERMET trimmer pot with 200 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a rated power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
D50K50KE
The Ohmite D50K50KE is a 50000 ohm wire wound potentiometer with linear resistance law. It has a rated power of 50W, operates at temperatures up to 350 °C, and features a slide actuator for precise adjustments. Ideal for chassis mount applications requiring high voltage tolerance and reliable performance.
14821F0GJSX13103KA
Vishay Intertechnology's 14821F0GJSX13103KA is a linear conductive plastic trimmer pot with 10000 ohm resistance, 3 terminals, and 10% tolerance. It operates b/w -40 to 125 °C and has a power dissipation of 0.5 W. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved