Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns PTV09A-4020S-A503 is a 50000 ohm potentiometer with 3 terminals, rated at 0.05 W power dissipation. Featuring a horizontal actuator and carbon technology, it has an operating voltage of 20 V and tolerance of 20%. Ideal for audio applications, this rectangular resistor with flat terminals operates b/w -10 to 50 °C in PCB mount setups.
Median Price
$0.890
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.619
1k+ parts
$0.511
10k+ parts
$0.450
DigiKey
$0.620
$0.514
Nova Conductors
$0.405
-
Vyrian
Advanced Electronics
$0.022
$0.020
$0.018
Netroflash
Continental Prestige Electronics
$0.397
Argo Parts USA
$0.393
AZTECH Wire
$0.870
$0.840
$0.820
$0.800
This orientation makes the variable resistor easy to install and use in various electronic circuits.
Carbon technology ensures good stability and reliability in the resistor's performance.
Audio law of resistance ensures smooth and accurate adjustment of volume controls and tone settings.
Rectangular construction makes it easy to mount and integrate the resistor into PCBs or circuit designs.
The high resistance value of 50000 ohms allows for fine adjustment and precise control over the circuit.
Having 3 terminals provides flexibility in circuit configurations and connections.
PCB mount package style enables easy and secure attachment to printed circuit boards.
Flat terminal shape ensures stable contact and connection within the circuit.
With a maximum operating temperature of 50°C, this variable resistor can withstand typical electronic operating conditions.
The ability to operate at a minimum temperature of -10°C makes it suitable for a wide range of environments.
Tin terminal finish provides good conductivity and corrosion resistance for reliable performance.
Being a potentiometer, this resistor allows for variable voltage or current control in the circuit.
Shaft actuator type enables smooth and precise adjustment of resistance value.
With an operating voltage of 20 volts, it is suitable for various electronic applications within the voltage range.
Having a tolerance of 20% ensures the resistor's performance stays within acceptable limits under varying conditions.
Compact length of 10mm makes it suitable for smaller or space-constrained electronic devices.
PCB mounting type offers easy installation and secure mounting on printed circuit boards.
The rated power dissipation of 0.05W ensures safe operation within the specified power limits.
Narrow width of 6.8mm allows for efficient use of space on the PCB or in the electronic device.
With a rotation angle of 280°, this variable resistor offers a wide range of adjustments for precise tuning.
Variable Resistors PTV09A-4020S-A503 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Additional Features:
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Length (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Technology:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
PTV09A-4020S-A503 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Bkc Semiconductors
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
3386F-1-204TLF
Bourns
Bourns 3386F-1-204TLF is a linear cermet trimmer resistor with 200k ohm resistance, 10% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments due to its wide operating range from -55°C to 125°C. Features vertical actuator orientation and knob type for precise adjustments.
3362U-1-202LF
Bourns 3362U-1-202LF is a CERMET trimmer resistor with 2000 ohm resistance, linear law, and 10% tolerance. It has a max operating temperature of 125°C and is ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
PV32H500A01B00
Murata Manufacturing
Murata Manufacturing's PV32H500A01B00 is a CERMET variable resistor with 50 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It is used in PCB mounting applications for temperature compensation circuits due to its linear resistance law and wide operating temperature range (-55 to 125 °C).
3224X-1-204E
Bourns 3224X-1-204E is a linear trimmer pot with 12 turns and resistance of 200k ohm. It has a temperature coefficient of 100 ppm/°C and operates b/w -65 to 150 °C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
23ESA104MMF50NF
TE Connectivity
TE Connectivity's 23ESA104MMF50NF is a linear carbon film potentiometer with 100k ohm resistance, 20% tolerance, and 0.4W power dissipation. It has a circular package, horizontal actuator orientation, and through-hole mounting. Ideal for precise voltage control in electronic circuits.
3590P-1-103L
Bourns 3590P-1-103L is a 10-turn linear wire wound potentiometer with 10000 ohm resistance, suitable for PCB mount. It has a rated power dissipation of 2W, operates b/w -40°C to +125°C, and offers a tolerance of 5%. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3306W-1-202
Bourns 3306W-1-202 is a linear trimmer resistor with 2000 ohm resistance, rated for 100V and 0.2W power dissipation. It has an operating temperature range of -25 to 100 °C and features a screw actuator for precise adjustments. Ideal for PCB mounting applications requiring accurate resistance tuning in compact spaces.
3549S-1AA-103B
Bourns 3549S-1AA-103B is a 10-turn linear wirewound potentiometer with 10000 ohm resistance, 3% tolerance, and 2W power dissipation. It has a circular package, panel mount style, and operates b/w -40 to 125 °C. Ideal for precise control applications in various electronic devices.
25SR20KLF
Tt Electronics Plc
25SR20KLF by Tt Electronics Plc is a CERMET variable resistor with a resistance of 20000 ohm, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mounting applications requiring precise voltage adjustments up to 300 V.
3005P-1-502
The Bourns 3005P-1-502 is a linear wire wound variable resistor with 20 turns and a resistance of 5000 ohm. It has a rated power dissipation of 1W and can operate in temperatures ranging from -65 to 125 °C. This trimmer resistor is commonly used in PCB mount applications requiring precise resistance adjustments.
3299Y-1-254
Bourns 3299Y-1-254 is a CERMET trimmer pot with 25 turns, 250k ohm resistance, and linear law. It has a PCB mount package style and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3299X-1-104LF
The Bourns 3299X-1-104LF is a CERMET variable resistor with a resistance of 100k ohm, 25 turns, and a linear law of resistance. It is commonly used in PCB mount applications for adjusting voltage or current levels.
3296Z-1-254LF
Bourns 3296Z-1-254LF is a CERMET multi-turn trimmer resistor with 250k ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in electronic circuits.
92R1A-R22-B13L
Bourns 92R1A-R22-B13L is a 5000 ohm linear potentiometer with 3 terminals. It has a rated power dissipation of 1W and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments in a compact rectangular package.
3386P-1-101LF
Bourns 3386P-1-101LF is a linear trimmer resistor with 100 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its 85°C to 125°C operating range and low temperature coefficient of 100 ppm/°C.
3142W202P
Piher Sensors And Controls Sa
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .15 W; Tolerance: 25 %; No. of Terminals: 3;
PVG5A103C03R00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PS100-1B1BR5K
PS100-1B1BR5K by Tt Electronics Plc is a linear conductive plastic potentiometer with 5000 ohm resistance, 20% tolerance, and 0.25 W power dissipation. It is used in PCB mount applications for precise voltage control due to its slide actuator and through-hole mounting capability.
3361P-1-503GLF
Bourns 3361P-1-503GLF is a CERMET variable resistor with 50000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C, has a power dissipation of 0.5 W, and can handle up to 300 V. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
3362P-1-203LF
Bourns 3362P-1-203LF is a linear trimmer resistor with 20000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for temperature-sensitive circuits due to its 70°C to 125°C operating range. The rectangular package with vertical actuator and screw type design make it suitable for precise adjustments in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PTV09A-4020F-B103
POTENTIOMETER; Mounting Type: PCB MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTV09A-4020U-B103
Bourns PTV09A-4020U-B103 is a linear potentiometer with 10000 ohm resistance, 20% tolerance, and 280° rotation angle. It is used in PCB mount applications for adjusting voltage levels in electronic circuits. Operating temperature ranges from -10 to 50 °C.
PTV09A-4025F-B103
Bourns PTV09A-4025F-B103 is a 10000 ohm POTENTIOMETER with 20% Tolerance, suitable for PCB Mounting. It operates b/w -10 to 50 °C and has a rated power dissipation of 0.05 W. Ideal for applications requiring precise resistance adjustment in compact spaces.
PTV09A-4020F-B104
POTENTIOMETER; Mounting Type: PCB MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTV09A-4225F-B103
POTENTIOMETER; Resistance: 10000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %; Height (Package): 6.8 mm;
PTV09A-4020U-B104
PTV09A-2015U-B103
PTV09A-4015U-B103
PTV09A-4020F-A203
POTENTIOMETER; Mounting Type: PCB MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTV09A-4225F-B102
POTENTIOMETER; Resistance: 1000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %; Package Style (Meter): PCB Mount;
PTV09A-8025U-B103
POTENTIOMETER; Terminal Finish: TIN; JESD-609 Code: e3;
PTV09A-4020S-A104
PTV09A-4020S-A105
POTENTIOMETER; Mounting Type: PCB MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTV09A-4020S-B103
PTV09A-4020S-B104
PTV09A-4020S-B105
Bourns PTV09A-4020S-B105 is a linear carbon potentiometer with 1000000 ohm resistance, 20% tolerance, and 280° rotation angle. It is used in applications requiring precise voltage control on PCBs due to its flat terminal shape and shaft actuator type. Operating temperature ranges from -10 to 50 °C.
PTV09A-2020F-B502
POTENTIOMETER; Mounting Type: PCB MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTV09A-2020F-B104
PTV09A-2025F-B103
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
PTV09A-4020S-C202
POTENTIOMETER; Mounting Type: PCB MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 50 Cel; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved