Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns PF-FB1-75 fuse with 1500J joule integral, 800V AC/DC voltage rating, and 75A current. Ideal for electric circuit protection in applications requiring high breaking capacity up to 100kA. Operating temperature range from -55°C to 125°C makes it suitable for various industrial uses.
Median Price
$74.980
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Arrow
1+ parts
$15.200
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$49.000
Verical
$67.047
Chip1Stop
RS Americas
$99.970
$79.980
DigiKey
$116.590
$67.897
Mouser Electronics
$66.690
Vyrian
Nova Conductors
Ampacity Inc.
$63.730
Allen Electronics Distributors
$98.980
$79.180
Neutron USA
$149.990
Argo Parts USA
Continental Prestige Electronics
Aranea Global
High joule rating ensures efficient protection against power surges and voltage spikes.
Suitable for high voltage applications, providing reliable circuit protection.
Convenient bulk packaging allows for easy storage and stocking of multiple fuses.
Compact size for easy installation in various electrical systems.
Tab/blade terminals ensure secure and efficient connection in circuits.
Provides sufficient clearance for the internal components and wiring.
High rated current capacity suitable for handling heavy electrical loads.
Can withstand high temperatures without compromising performance.
Capable of operating in extreme cold temperatures without issues.
Designed specifically for circuit protection against overcurrent and short circuits.
High breaking capacity ensures reliable protection under short-circuit conditions.
Suitable for DC voltage applications, providing versatile protection capabilities.
Can be easily mounted inline or in fuse holders for flexible installation options.
Compliance with CUL and UL standards ensures quality and safety of the product.
Fuses PF-FB1-75 attributes and parameters. Explore more Fuses devices from Bourns
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Additional Features:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
PF-FB1-75 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
1554216004
Molex
WIRE AND CABLE;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
0691-0050-01
Bel Fuse
Bel Fuse 0691-0050-01 is a MICRO fuse with 0.05A rated current and 250V AC voltage. It offers fast blow characteristic, 50A breaking capacity, and operates b/w -55°C to 125°C. Ideal for circuit protection in various applications requiring electric fuses.
FNQ-10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
AJT125/400
Mersen S A
Mersen S A's AJT125/400 fuse, rated 125A and 600V, features time lag blow characteristic. With dimensions of 54mm x 181mm, it is a J-class fuse with 200kA breaking capacity. Ideal for electric circuit protection in applications requiring inline mounting and compliance with IEC and UL standards.
ATDR30
The Mersen S A ATDR30 fuse is a 30A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm, body height of 38.1mm, and blow characteristic suitable for inline/holder mounting applications. This CSA and UL standard compliant fuse offers circuit protection with a high breaking capacity of 200kA.
ATDR3-2/10
ATDR3-2/10 by Mersen S A is a 3.2A time delay fuse with 600V AC and 300V DC ratings. It has a rated breaking capacity of 200kA, suitable for electric fuse circuit protection in various applications. The fuse features an end cap terminal shape and inline/holder mounting, meeting CSA and UL standards.
3413.0008.22
Schurter Ag
Schurter Ag's 3413.0008.22 fuse is a 3.2x1.6mm surface mount type with 0.16A current rating and 125V AC voltage, suitable for electric circuit protection applications. It has a very fast blow characteristic, gold terminal finish, and meets CUL and UL standards for reliable performance in temperatures ranging from -55 to 90°C.
39601600000
Littelfuse
39601600000 fuse by Littelfuse is a TE5 size with rated voltage of 125V and current of 0.16A. It has a time lag blow characteristic, trip time of 60s, and nominal joule integral of 0.058J. Ideal for circuit protection in applications requiring a through hole mounting feature.
ATQR4
ATQR4 by Mersen S A is a 4A electric fuse with time delay blow characteristic. Rated for 600V AC and 300V DC, it has a breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm, it is commonly used in inline/holder mounting applications for circuit protection.
ATQR2/10
The Mersen S A ATQR2/10 fuse is a time-delay electric fuse with a rated current of 0.2A and voltage of 600V, suitable for inline mounting applications. It has a compact body size of 10.4mm x 38.1mm and meets CSA, CE, and UL standards, offering high breaking capacity of 200kA for circuit protection at up to 80°C temperature.
LKN-100
Eaton Corporation
ELECTRIC FUSE;
0157002.DRT
Littelfuse 0157002.DRT NANO fuse with 8.2J joule integral, 125V AC voltage, and 0.1s trip time. Ideal for circuit protection in electronics with WRAPAROUND terminals and TIME LAG blow characteristic. Rated at 2A current, it offers a compact size of 6.1mm x 2.69mm x 2.69mm for surface mount applications.
AGC-2-R
AGC-2-R by Eaton Corp is a 2A electric fuse with 250V AC voltage rating and 17.52J nominal joule integral. It has a fast blow characteristic, rated breaking capacity of 100A, and operates b/w -55°C to 125°C. Commonly used for circuit protection in inline/holder mounting applications.
0001.2534
Schurter Ag 0001.2534 fuse, rated 10A with 250V AC & 63V DC, offers time lag blow characteristic and 1500A breaking capacity. Ideal for electric circuit protection in applications requiring a compact 6.3x32mm size fuse with nickel terminal finish and CUL/UL standards compliance.
JJS-500
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE; Dimensions: 31.75mm x 45.21mm;
KLB4
KLB4 by Littelfuse is a 4A fast blow electric fuse with 250V AC/DC rated voltage, ideal for inline mounting. With dimensions of 14.3mm x 50.8mm and high breaking capacity of 200kA, it meets CSA and UL standards for reliable circuit protection in various applications.
SR-5-1A-AP
Eaton Corporation's SR-5-1A-AP fuse has a rated current of 1A and nominal joule integral of 7.5J, suitable for circuit protection with a blow characteristic of time delay. With a max operating temperature of 125°C and rated AC voltage of 250V, it is ideal for applications requiring reliable electrical fuse protection in various industries.
SP/LPJ-400SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
DMM-B-11A
The Eaton Corporation DMM-B-11A fuse is rated for 11A current and 1000V AC/DC voltage with a fast blow characteristic. It features nickel terminal finish, UL reference standard, and 20000A breaking capacity. Ideal for electric circuit protection in various applications due to its compact size of 10mm x 38.1mm and end cap terminal shape.
0452003.MRL
Littelfuse 0452003.MRL fuse, rated at 125V, 3A, with slow blow characteristic and trip time of 0.002s. Nano size for circuit protection in applications requiring a 20.16J nominal joule integral and WRAPAROUND terminal shape. Suitable for surface mount installations with CSA, CUL, UL standards compliance.
3413.0214.22
Schurter Ag's 3413.0214.22 fuse, rated at 0.63A and 32V, features a very fast blow characteristic with dimensions of 3.2mm x 1.6mm x 0.6mm. Ideal for circuit protection in electronics, it has a pre-arcing rating of 0.076 A2/s and operates b/w -55°C to 90°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PF-FB2-160
Bourns
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 160 A; Terminal Shape: TAB/BLADE;
PF-FB2-300
The Bourns PF-FB2-300 fuse offers 52000J nominal joule integral, 800V AC/DC rated voltage, and 300A current rating. Ideal for electric circuit protection in applications requiring high breaking capacity up to 100000A.
PF-FB2-150
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE;
PF-FB1-50
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 50 A; Terminal Shape: TAB/BLADE;
PF-FB1-150
PF-FB1-350
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 350 A; Terminal Shape: TAB/BLADE;
PF-FB1-400
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
PF-FB1-125
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
PF-FB1-160
PF-FB1-200
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE;
PF-FB1-250
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 250 A; Terminal Shape: TAB/BLADE;
PF-FB1-300
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 300 A; Terminal Shape: TAB/BLADE;
PF-FB2-200
PF-FB1-225
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 225 A; Terminal Shape: TAB/BLADE;
PF-FB1-100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
PF-FB1-175
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE;
PF-FB2-100
PF-FB2-125
PF-FB2-50
PF-FB2-75
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 800 V; Rated DC Voltage: 800 V; Rated Current: 75 A; Terminal Shape: TAB/BLADE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved