Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MOV-10D511KTR by Bourns is a VARISTOR with 70J energy capacity, 320V RMS voltage, and 415V operating voltage. Ideal for surge protection in applications requiring high-energy absorption like power supplies and industrial equipment. With radial terminal placement and metal oxide film technology, it ensures reliable performance in extreme temperature conditions from -40°C to 105°C.
Median Price
$0.168
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Newark
1+ parts
$0.197
100+ parts
-
1k+ parts
10k+ parts
$0.169
Mouser Electronics
$0.290
$0.152
$0.123
$0.110
DigiKey
$0.140
Avnet
$0.089
$0.085
Master Electronics
$0.107
$0.090
Verical
Nova Conductors
$0.120
Vyrian
Electro Sonic
IBS Electronics
$0.208
$0.153
Advanced Electronics
$0.024
$0.022
$0.020
Continental Prestige Electronics
$0.118
Argo Parts USA
$0.116
Perfect Parts
Allows for easy installation and maintenance.
Provides high reliability and stability.
Ensures efficient heat dissipation.
Offers protection against high energy surges.
Facilitates convenient storage and transportation.
Simplifies connection and integration into circuits.
Allows for compact and space-saving design.
Enables secure and easy connectivity.
Ensures stable performance in various environments.
Provides versatility for use in different conditions.
Enhances durability and corrosion resistance.
Offers a low-profile design for efficient space utilization.
Ideal for voltage regulation and transient suppression.
Suitable for a wide range of applications with varying voltage levels.
Provides ample voltage tolerance for reliable operation.
Compact size for easy integration into circuits.
Allows for secure and stable mounting.
Ensures efficient power handling capability.
Meets industry standards for safety and quality assurance.
Suitable for DC applications requiring high voltage tolerance.
Compact width for efficient use of space.
Non-linear Resistors MOV-10D511KTR attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Reference Standard:
Resistor Type:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
MOV-10D511KTR Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Packaging - MOV Series Sep/2014
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
Gulf Semiconductor
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
Rochester Electronics
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Promax-johnton
NANOSMDC075F-2
TE Connectivity's NANOSMDC075F-2 is a PTC resettable fuse with 6V URac, 0.8W power dissipation, and 85°C max operating temp. It features dual-ended terminals in a rectangular package for temperature sensing applications. Suitable for surface mounting method.
MF-GSMF300/36X-2
Bourns
Bourns MF-GSMF300/36X-2 is a PTC resettable fuse with 0.01 ohm resistance, 36V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in SMT applications, it has a temperature range of -40 to 85 °C and meets CUL, TUV, and UL standards.
RUEF900
Raychem
PTC RESETTABLE FUSE; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin (Sn); Dimensions: 29mm x 24.1mm x 3mm; Height (Package): 3 mm;
RXEF020S
TE Connectivity's RXEF020S is a PTC resettable fuse resistor with a rated AC voltage of 72V. It is used for temperature sensing applications and has a max operating temperature of 85°C. Its terminal placement is radial, and it comes in a disk package shape.
ASMD100F-2
TE Connectivity's ASMD100F-2 is a PTC resettable fuse with 0.098 ohm resistance, 30V operating voltage, and -40 to 85°C temperature range. It features dual-ended terminals for overcurrent protection in surface mount applications. AEC-Q200 and TS 16949 compliant, it offers reliable circuit protection in compact SMT packages.
ERTJ0EV474J
Panasonic
Panasonic ERTJ0EV474J is a NTC thermistor with 470000 ohm resistance, 5% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4750 K. With dual-ended terminals and SMT package style, it operates b/w -40 to 125 °C for precise control.
B72214-S271-K101
TDK
TDK's B72214-S271-K101 varistor has a max energy capacity of 71J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
RF1180-000
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Height (Package): 1.94 mm;
RUEF250U-2
The Littelfuse RUEF250U-2 is a PTC resettable fuse with resistance of 0.02 ohm, suitable for overcurrent protection applications. It has a max operating temperature of 85°C and operates at 30V DC/RMS voltage. With radial terminal placement and rectangular package shape, it is designed for through-hole mounting in various electronic circuits.
MF-USHT110KX-2
MF-USHT110KX-2 by Bourns is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 9V, and max temp of 125°C. It's used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style. Compliant with AEC-Q200, CUL, TUV standards.
RKEF250
TE Connectivity's RKEF250 is a PTC resettable fuse with 2.8W power dissipation, rated for 60V AC voltage. Ideal for temperature sensing applications, it features radial terminal placement and tin finish, operating b/w -40°C to 85°C.
SMD100F-2018-2
TE Connectivity's SMD100F-2018-2 is a PTC resettable fuse with 15V URac, 1.4W power dissipation, and 85°C max operating temp. Ideal for temperature sensing applications, it features dual-ended terminals in a rectangular package for surface mounting.
SIOV-S20K275
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 105 Cel; Tolerance: 10 %; Reference Standard: UL, CSA;
RXEF090-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2; Terminal Shape: WIRE;
MF-RX300/72-0
Bourns MF-RX300/72-0 is a PTC resettable fuse with resistance of 0.04 ohm and operating voltage of 72V. It is used for overcurrent protection in applications requiring radial terminal placement and through-hole mounting. With a compact rectangular package, it offers reliable circuit protection with temperature range from -40°C to 85°C.
RUEF250S
TE Connectivity's RUEF250S is a PTC resettable fuse with resistance of 0.07 ohm and rated power dissipation of 1.2W. Ideal for temperature sensing applications, it features radial terminal placement and dimensions of 11.4mm x 3mm x 17.5mm, operating at a max temperature of 85°C.
RXEF110K-AP
TE Connectivity's RXEF110K-AP is a PTC resettable fuse with rated AC voltage of 72V. It has radial terminal placement and disk package shape, suitable for temperature sensing applications. With operating temperatures from -40°C to 85°C, it is mounted through hole for reliable performance.
B72210S0301K101
B72210S0301K101 by TDK is a VARISTOR with 47J energy capacity, 300V RMS voltage, and 385V operating voltage. It is used for surge protection in applications requiring high reliability and durability. With radial terminal placement and metal oxide technology, it offers robust protection against electrical surges.
EZJZ1V220JA
The Panasonic EZJZ1V220JA is a VARISTOR resistor with DUAL ENDED terminals, suitable for SURFACE MOUNT applications. It has an operating voltage of 13V and can withstand temperatures from -40 to 85°C. The RECTANGULAR PACKAGE measures 1.6mm in length, 0.8mm in width and height, with TIN terminal finish.
TRF250-180-2
TE Connectivity's TRF250-180-2 is a PTC resettable fuse with 4 ohm resistance and 1.5 W power dissipation. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. With a rated AC voltage of 100 V, it operates b/w -40 to 85 °C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOV-10D201KTR
MOV-10D201KTR by Bourns is a VARISTOR with 30J energy capacity, 130V RMS voltage, and 170V operating voltage. It is used for surge protection in applications requiring high transient suppression capabilities. The device has radial terminal placement, metal oxide film technology, and a disk package shape.
MOV-10D561KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Terminal Placement: RADIAL;
MOV-10D471KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 105 Cel; No. of Terminals: 2; JESD-609 Code: e3;
MOV-10D561K
The Bourns MOV-10D561K is a VARISTOR with 70J energy capacity, 350V RMS voltage, and 460V DC operating voltage. It is used for surge protection in circuits with radial terminal placement and metal oxide film technology. Ideal for applications requiring high energy absorption and UL compliance.
MOV-14D560K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Technology: METAL OXIDE; Width (Package): 4.3 mm;
MOV-10D431KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 105 Cel; Shape (Package): DISK PACKAGE; JESD-609 Code: e3;
MOV-10D471K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 105 Cel; Maximum Energy Absorbing Capacity: 70 J; Shape (Package): DISK PACKAGE;
MOV-14D471KTR
The Bourns MOV-14D471KTR is a VARISTOR with 300V max RMS voltage and 125J energy absorption. It has a radial package, through-hole mounting, and operates b/w -40°C to 105°C. Ideal for surge protection in electronic circuits.
MOV-10D201K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 105 Cel; Maximum Circuit RMS Voltage: 130 V; Reference Standard: UL;
MOV-14D431K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Reference Standard: CUL; UL; Shape (Package): DISK PACKAGE;
MOV-14D431KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Shape (Package): DISK PACKAGE; Terminal Finish: Tin (Sn);
MOV-14D511KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Package Style (Meter): Radial; Maximum Circuit RMS Voltage: 320 V;
MOV-10D621K
MOV-10D431K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -40 Cel; Maximum Energy Absorbing Capacity: 65 J;
MOV-14D270K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -40 Cel; Terminal Finish: TIN;
MOV-14D561KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Height (Package): 22 mm; Terminal Placement: RADIAL;
MOV-10D361KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 105 Cel; Shape (Package): DISK PACKAGE; Operating Voltage: 300 V;
MOV-14D561K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Technology: METAL OXIDE; Shape (Package): DISK PACKAGE;
MOV-14D102K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 105 Cel; Terminal Placement: RADIAL; Technology: METAL OXIDE;
MOV-10D560K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 105 Cel; Length (Package): 12.5 mm; Package Style (Meter): Radial;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved