Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns MOV-07D180K varistor with 0.9J energy capacity, 11V RMS voltage, and -40 to 105°C temp range. Ideal for surge protection in electronics due to its metal oxide film technology and radial terminal placement.
Median Price
$0.120
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Master Electronics
1+ parts
$0.060
100+ parts
-
1k+ parts
10k+ parts
$0.052
DigiKey
$0.170
$0.084
$0.073
$0.063
Mouser Electronics
$0.190
$0.098
$0.085
$0.071
Verical
$0.070
IBS Electronics
$0.086
$0.074
Electro Sonic
$0.056
Nova Conductors
Continental Prestige Electronics
$0.397
$0.076
EMSNET (Excess)
Aranea Global
Radial terminal placement makes it easy to insert and solder the resistor into a circuit board, which can save time during assembly.
Metal oxide film technology provides high energy absorption capacity and reliability, making it suitable for applications where protection against transient voltage spikes is essential.
With a high energy absorbing capacity of 0.9 J, this resistor can effectively protect circuits from voltage surges and spikes, ensuring the safety and longevity of electronic devices.
The high maximum operating temperature of 105°C allows this varistor to be used in a wide range of environments without compromising performance or reliability.
With a minimum operating temperature of -40°C, this varistor can function reliably in cold environments, making it versatile and suitable for various applications.
The through-hole mounting type ensures easy installation and secure connection to the circuit board, providing stability and durability to the overall electronic system.
Non-linear Resistors MOV-07D180K attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Reference Standard:
Resistor Type:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
MOV-07D180K Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
PCN Packaging - Mult Series Taping Method 19/May/2023
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Hi-tron Semiconductor
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Asi Semiconductor
Promax-johnton
SPC TECHNOLOGY/ MULTICOMP
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LM78L05ACMX/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
B72220S3301K101
TDK
The TDK B72220S3301K101 is a VARISTOR with 300V max RMS voltage and 385V operating voltage. With METAL OXIDE FILM tech, it has 290J energy capacity. Ideal for surge protection in applications like power supplies due to its high energy absorption and radial terminal placement.
EZJS2VB223
Panasonic
The Panasonic EZJS2VB223 is a VARISTOR resistor with dual-ended terminals, SMT package style, and 6V operating voltage. It is designed for surface mounting, with a temperature range of -40 to 85°C. Ideal for applications requiring protection against overvoltage in compact electronic devices.
MINISMDC075F-2
TE Connectivity
TE Connectivity's MINISMDC075F-2 is a PTC resettable fuse with resistance of 0.11 ohm. It features dual-ended terminals and a rectangular package for surface mount applications. Ideal for temperature sensing, it has a max operating temperature of 85°C.
MF-NSMF012-2
Bourns
Bourns MF-NSMF012-2 is a PTC resettable fuse with 1.35 ohm resistance, operating at 30V. Its dual-ended terminals and SMT package make it suitable for automotive applications, meeting AEC-Q200, CUL, TUV, and UL standards. With a temperature range of -40 to 85°C, it offers reliable protection in compact dimensions (3.4mm x 1.8mm x 1.1mm).
1206L150THWR
Littelfuse
1206L150THWR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 8V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. The thermistor has a compact size (3.4mm x 1.8mm x 1mm) and meets standards like CUL, TUV, and UL.
TFPT0603L1001FM
Vishay Dale
PTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .075 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
RXEF030
TE Connectivity's RXEF030 is a PTC resettable fuse with 2.1 ohm resistance and rated AC voltage of 72V. Ideal for temperature sensing applications, it has a max operating temp of 85°C and min of -40°C. With radial terminal placement and disk package shape, it offers 0.49W power dissipation in through-hole mounting method.
TRF250-145
TE Connectivity's TRF250-145 is a PTC resettable fuse with 60V operating voltage and 1W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement in a disk package measuring 6.5mm x 4.6mm x 11mm. With CSA, TUV, and UL certifications, it operates b/w -40°C to 85°C.
NANOSMDC150F-2
NANOSMDC150F-2 by TE Connectivity is a PTC thermistor used for overload protection. It has dual-ended terminal placement and a rectangular package shape. The surface mount resistor has matte tin finish with nickel barrier.
PESD0603-240
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Technology: METAL GLAZE/THICK FILM; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Terminals: 2;
B72207-S301-K101
The TDK B72207-S301-K101 is a VARISTOR with 300V max RMS voltage and 23J energy absorption. Suitable for applications requiring protection against voltage surges, it has a radial terminal placement and disk package shape. Operating temperature ranges from -40 to 85°C, making it ideal for various electronic devices.
B72214S0351K101
The TDK B72214S0351K101 is a VARISTOR with 80J energy capacity, 350V RMS voltage, and 460V operating voltage. It is used for surge protection in electronics, featuring radial terminal placement and metal oxide technology. Ideal for applications requiring high-energy absorption and circuit protection.
RUEF400K-AP
PTC RESETTABLE FUSE; Manufacturer Series: RUEF;
RXEF375K
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Minimum Operating Temperature: -40 Cel; Packing Method: BULK;
TMOV14RP320E
TMOV14RP320E by Littelfuse is a VARISTOR with 320V RMS voltage and 136J energy capacity. It operates b/w -55°C to 125°C, ideal for SURGE PROTECTION in various applications. With radial terminal placement and metal oxide film technology, it offers reliable protection against electrical surges.
RXEF050-2
TE Connectivity's RXEF050-2 is a PTC resettable fuse with 1.17 ohm resistance and rated power dissipation of 0.77 W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and disk package shape, it offers reliable protection in various electronic circuits.
V10E150PL1T
V10E150PL1T by Littelfuse is a VARISTOR with 150V RMS and 200V DC max circuit voltage. It has METAL OXIDE FILM tech, 30J energy absorption, and -55 to 85°C operating temp range. Ideal for surge protection in various applications due to its high energy capacity and radial terminal placement.
PS103J2
PS103J2 by Littelfuse is a NTC thermistor with 10000 ohm resistance, ideal for temperature sensing applications. Featuring radial terminal placement and disk package shape, it operates b/w -80 to 150 °C with high thermal sensitivity index of 3892 K. Suitable for through hole mounting, this component has tin terminal finish and wire-shaped terminals.
DFP10112
Tdk-lambda
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1.6 W; Tolerance: 5 %; Terminal Shape: WIRE;
NCU15XH103F6SRC
Murata Manufacturing
Murata Manufacturing's NCU15XH103F6SRC is a 10000 ohm NTC thermistor with dual-ended terminals for temperature sensing applications. It has a thermal sensitivity index of 3380 K and operates b/w -40 to 150 °C, suitable for surface mounting with a tolerance of 1%.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOV-07D471KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Terminal Finish: TIN; Maximum Circuit RMS Voltage: 300 V;
MOV-07D561KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Height (Package): 11 mm; Packing Method: TR, 14 INCH;
MOV-07D391KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Maximum Circuit RMS Voltage: 250 V; No. of Terminals: 2;
MOV-07D560KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Operating Voltage: 45 V; Width (Package): 3.9 mm;
MOV-07D821K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; No. of Terminals: 2;
MOV-07D821KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Packing Method: TR, 14 INCH;
MOV-07D561K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -40 Cel; Package Style (Meter): Radial;
MOV-07D431KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Height (Package): 11 mm; Minimum Operating Temperature: -40 Cel;
MOV-07D511K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Technology: METAL OXIDE FILM; Packing Method: BULK;
MOV-07D391K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Width (Package): 4.6 mm; Shape (Package): DISK PACKAGE;
MOV-07D431K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Maximum Circuit DC Voltage: 350 V; Terminal Placement: RADIAL;
MOV-07D471K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; No. of Terminals: 2; Shape (Package): DISK PACKAGE;
MOV-07D511KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; No. of Terminals: 2; JESD-609 Code: e3;
MOV-07D220K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; JESD-609 Code: e3; Operating Voltage: 18 V;
MOV-07D270K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Package Style (Meter): Radial; Terminal Finish: TIN;
MOV-07D330K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Maximum Energy Absorbing Capacity: 1.7 J; JESD-609 Code: e3;
MOV-07D470K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Height (Package): 11 mm; Reference Standard: UL;
MOV-07D220KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Terminal Finish: TIN; Technology: METAL OXIDE FILM;
MOV-07D221KTR
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Maximum Energy Absorbing Capacity: 14 J; Width (Package): 3.5 mm;
MOV-07D121K
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 105 Cel; Terminal Shape: WIRE; Length (Package): 9 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved