Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns MF-NSMF012-2 is a PTC resettable fuse with 1.35 ohm resistance, operating at 30V. Its dual-ended terminals and SMT package make it suitable for automotive applications, meeting AEC-Q200, CUL, TUV, and UL standards. With a temperature range of -40 to 85°C, it offers reliable protection in compact dimensions (3.4mm x 1.8mm x 1.1mm).
Median Price
$0.300
Lifecycle Status
Suppliers In-Stock
39
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.190
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.330
$0.223
$0.171
$0.142
Distrelec
$0.349
$0.338
$0.305
RS Americas
$0.350
$0.315
DigiKey
$0.400
$0.233
$0.178
Newark
$0.443
$0.385
Arrow
$0.140
Verical
TTI Europe
$0.133
Element14
$0.503
$0.459
$0.414
Farnell
$0.331
$0.324
$0.316
Master Electronics
$0.270
$0.250
TTI
$0.134
Chip1Stop
$0.248
Ozdisan Elektronik
$0.117
Nova Conductors
$0.226
TME
$0.260
$0.212
Bristol Electronics
$0.297
$0.148
$0.059
$0.037
Maritex
$0.262
$0.222
$0.214
Chip Stock
NAC Semi
$0.227
Vyrian
Electro Sonic
$0.145
IBS Electronics
$0.391
$0.359
Dan-Mar Components
ACDS - Activité Composants Distribution Service
Rebound Electronics
ComSIT USA
EPE Components Inc.
Atlantic Semiconductor
Ashlea Components Ltd
ComSIT Distribution GmbH
Holdelec - ElecDif-Pro
Resion
Sensible Micro Corp
$0.010
$0.009
Goldney Electronics S.L.
Martec Srl
Cogito LLC
Bas Electronics GmbH & Co. KG
Advanced Electronics
$0.025
$0.023
$0.020
Aztec Data Supply Inc.
$0.040
Semicontronic
$0.105
$0.102
Argo Parts USA
$0.192
$0.186
Aranea Global
$0.221
$0.213
Corohmni
$0.224
Continental Prestige Electronics
$0.257
$0.169
$0.130
$0.108
Abacus Technologies
Perfect Parts
Eastek
$0.160
GreenTree Electronics
S.R.D Solutions
Kepictronics
Futuretech Components
Cyclops Electronics Ltd (Excess)
Assy Fe
Allen Electronics Distributors
Allows for easy connection on both ends, providing flexibility in installation and use.
Compact design saves space and is ideal for densely populated circuit boards.
Convenient packaging for handling and storage, ensuring product protection during transportation.
Provides precise resistance value for specific circuit requirements, ensuring accurate performance.
Simple design with two terminals simplifies installation and connection process.
Surface mount technology enables easy and secure attachment to PCBs for efficient assembly.
Wraparound terminals offer secure connections and prevent accidental disconnection.
High operating temperature tolerance makes it suitable for a wide range of applications.
Can operate in extreme cold temperatures, making it versatile and reliable in various environments.
Gold over nickel finish ensures high conductivity and corrosion resistance for long-term reliability.
Low profile design saves space and allows for compact integration into electronic devices.
PTC resettable fuse function protects circuits from overcurrent conditions, enhancing safety and longevity.
Suitable for use in low to moderate voltage applications, providing protection against voltage surges.
Compact length allows for flexible placement in tight spaces without sacrificing performance.
Surface mount design simplifies installation and maintenance, making it ideal for automated assembly processes.
Compliance with industry standards ensures high quality and reliability for various applications.
Slim width allows for efficient use of PCB real estate and facilitates compact system design.
Non-linear Resistors MF-NSMF012-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Additional Features:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
MF-NSMF012-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Design/Specification - MF Cert Mark Aug/2015
PCN Assembly/Origin - MF-yyyF, MF-xSMF Series May/2014
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Eic Semiconductor
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
Microsemi
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
B72220-S461-K101
TDK
The TDK B72220-S461-K101 is a VARISTOR with 460V max circuit RMS voltage and 195J max energy absorption. It has a radial terminal placement, wire terminals, and operates b/w -40°C to 85°C. Ideal for surge protection in various electronic applications.
PTS181224V150
Eaton Corporation
PTS181224V150 by Eaton Corporation is a non-linear resistor used for temperature sensing. It has dual-ended terminal placement and comes in a rectangular package. With a max operating temperature of 85°C and min operating temperature of -40°C, it is suitable for surface mount applications.
B59607-A120-A62
B59607-A120-A62 by TDK is a PTC thermistor with 55 ohm resistance and 25% tolerance. It is used for overload protection, featuring dual-ended terminals in a rectangular package. With a rated AC voltage of 30V, it operates b/w -20°C to 85°C, suitable for surface mount applications.
NTC0805J220R
TE Connectivity
TE Connectivity's NTC0805J220R is a 220 ohm NTC thermistor with 5% tolerance and 0.125 W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. Ideal for surface mounting, it measures 2mm x 1.25mm x 0.5mm.
RUEF400K
TE Connectivity's RUEF400K is a PTC resettable fuse with resistance of 0.05 ohm and rated power dissipation of 2.5W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and rated AC voltage of 30V. With radial terminal placement and dimensions of 14mm x 3mm x 21.3mm, it is designed for through hole mounting in various electronic devices.
MF-MSMF110/24X-2
Bourns
The Bourns MF-MSMF110/24X-2 is a PTC resettable fuse with resistance of 0.06 ohm, operating voltage of 24V, and dual-ended terminal placement. Ideal for overcurrent protection in various applications, it features SMT package style, gold over nickel terminal finish, and AEC-Q200 reference standard compliance.
B57237-S220-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 22 ohm; Maximum Operating Temperature: 170 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2;
B72220S3301K101
The TDK B72220S3301K101 is a VARISTOR with 300V max RMS voltage and 385V operating voltage. With METAL OXIDE FILM tech, it has 290J energy capacity. Ideal for surge protection in applications like power supplies due to its high energy absorption and radial terminal placement.
NTCS0603E3472FHT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
NANOSMDC150F-2
NANOSMDC150F-2 by TE Connectivity is a PTC thermistor used for overload protection. It has dual-ended terminal placement and a rectangular package shape. The surface mount resistor has matte tin finish with nickel barrier.
RUEF400K-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL;
TDK's B57237-S220-M NTC Thermistor has a resistance of 22 ohm with 20% tolerance. Rated for 265V AC, it operates b/w -55°C to 170°C. Ideal for soft start applications due to its thermal sensitivity index of 3060 K.
B57236S0259M000
B57236S0259M000 by TDK is a NTC resistor with 2.5 ohm resistance and 20% tolerance. It is used for soft start applications, with a rated temperature of 25°C and max operating temperature of 170°C. The thermistor has radial terminal placement, disk package shape, and can handle up to 265V AC voltage.
RUEF300
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .08 ohm; Rated Power Dissipation (P): 2 W; Maximum Operating Temperature: 85 Cel; Additional Features: RESISTANCE RANGE(MIN-MAX): 0.020-0.050;
GMOV-20D271K
The Bourns GMOV-20D271K is a metal oxide varistor with a max energy absorbing capacity of 305 J. It is used for overload protection in applications such as electrical circuits and power supplies. With its radial terminal placement and through-hole mounting, it offers reliable performance in a compact package (23mm x 9mm).
0ZCF0185FF2C
Bel Fuse
Bel Fuse's 0ZCF0185FF2C is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 33V, and max circuit DC voltage of 33V. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular SMT package.
B72210-S400-K101
B72210-S400-K101 by TDK is a VARISTOR with 40V max RMS voltage and 6.4J energy absorption capacity. It has radial terminal placement, wire terminals, and operates b/w -40°C to 85°C. Ideal for applications requiring protection against voltage surges in bulk packaging.
NTCS0603E3683FHT
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 68000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
CG0402MLC-05LG
Bourns CG0402MLC-05LG is a VARISTOR with 25V max RMS voltage and 5V operating voltage. It has dual-ended terminals, rectangular package, and wraparound shape. Ideal for surface mount applications in temperature range of -40 to 85°C.
MINISMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; No. of Terminals: 2;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MF-NSMF050-2
The Bourns MF-NSMF050-2 is a PTC resettable fuse with resistance of 0.15 ohm, operating voltage of 13.2V, and max temp of 85°C. It features dual-ended terminals in a rectangular SMT package suitable for automotive applications meeting AEC-Q200 standards.
MF-NSMF020-2
Bourns MF-NSMF020-2 is a PTC resettable fuse with resistance of 0.6 ohm, operating voltage of 24V, and temperature range from -40 to 85°C. It is used in automotive electronics for overcurrent protection due to its dual-ended terminals and SMT package style.
MF-NSMF150-2
Bourns MF-NSMF150-2 is a PTC resettable fuse with resistance of 0.03 ohm, operating voltage of 6V, and temperature range from -40 to 85°C. It's a surface mount device in rectangular package for automotive, industrial, and consumer electronics applications.
MF-NSMF200-2
Bourns MF-NSMF200-2 is a PTC resettable fuse with resistance of 0.02 ohm, operating voltage of 6V, and max temp of 85°C. Ideal for automotive applications due to AEC-Q200 compliance, it features dual-ended terminals in a rectangular SMT package for surface mounting.
MF-NSMF075-2
Bourns MF-NSMF075-2 is a PTC resettable fuse with resistance of 0.1 ohm, operating voltage of 6V, and max temp of 85°C. Ideal for automotive applications due to AEC-Q200 compliance and surface mount package style.
MF-NSMF110-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Operating Voltage: 6 V;
MF-NSHT035KX-2
Bourns MF-NSHT035KX-2 is a PTC resettable fuse with resistance of 0.4 ohm, operating voltage of 30V, and max temp of 125°C. It's used for overcurrent protection in automotive applications due to its dual-ended terminals and SMT package style. AEC-Q200, CUL, TUV certified for reliability.
MF-NSHT010KX-2
The Bourns MF-NSHT010KX-2 is a PTC resettable fuse with 1 ohm resistance, 30V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in automotive applications. SMT package style, AEC-Q200 compliant, with temperature range from -40 to 125°C.
MF-NSML150/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .01 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Terminal Shape: WRAPAROUND;
MF-NSML200-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 6 V; Reference Standard: CUL, TUV, UL;
MF-NSMF020X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .6 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Terminal Placement: DUAL ENDED;
MF-NSMF012
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .4 W; Maximum Operating Temperature: 85 Cel; Height (Package): 1.1 mm; Minimum Operating Temperature: -40 Cel;
MF-NSMF020
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .6 W; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Packing Method: TR, 7 INCH;
MF-NSMF035-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .3 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; JESD-609 Code: e4;
MF-NSMF035X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .3 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: AEC-Q200; CUL; TUV; UL; Operating Voltage: 16 V;
MF-NSMF016-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .7 ohm; Maximum Operating Temperature: 85 Cel; Length (Package): 3.4 mm; Operating Voltage: 30 V;
MF-NSMF025X-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .45 ohm; Maximum Operating Temperature: 85 Cel; Additional Features: RMIN AT 23 DEG CEL; Operating Voltage: 16 V;
MF-NSML200/12-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .005 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Terminal Shape: WRAPAROUND;
MF-NSMF125-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .05 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Height (Package): .7 mm;
MF-NSMF175-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .02 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Height (Package): 1.6 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved