Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns DR331-253AE is a UL-approved data line filter with 2 functions, rated at 80V and 0.5A. With inductance of 25uH, it operates b/w -40°C to 135°C. Ideal for surface mount applications requiring compact dimensions of L7.3xB5.4xH4.7mm, this filter offers low DC resistance at 0.2 ohm for efficient data line filtering.
Median Price
$0.710
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Farnell
1+ parts
100+ parts
$0.446
1k+ parts
$0.390
10k+ parts
$0.356
Mouser Electronics
$0.990
$0.609
$0.491
$0.481
DigiKey
$0.670
$0.584
-
Newark
$1.110
$0.785
$0.685
$0.671
Element14
$1.240
$0.887
$0.809
Arrow
$0.410
Verical
$0.401
Master Electronics
$0.482
$0.452
Chip1Stop
$0.453
Electro Sonic
$0.561
$0.475
IBS Electronics
$0.974
$0.935
TME
$0.468
Nova Conductors
Ampacity Inc.
$0.320
Continental Prestige Electronics
$0.668
$0.470
$0.366
$0.347
RC Electronics
$0.610
$0.550
$0.540
Kepictronics
Perfect Parts
iodParts Technologies Inc.
Aranea Global
UL approval ensures that the product meets safety standards and regulations, making it a reliable choice for consumers.
Having multiple functions allows the data line filter to effectively filter out noise and interference, ensuring a clean signal transmission.
The high rated voltage capacity makes this data line filter suitable for a wide range of electronic devices and applications.
Being a dedicated data line filter ensures that it is designed specifically for filtering data signals, providing optimal performance in data transmission.
With a high maximum operating temperature, this data line filter can withstand heat without compromising its functionality, ensuring long-term reliability.
The low minimum operating temperature allows the data line filter to function effectively in various environmental conditions, making it versatile and adaptable.
The terminal finish of tin over nickel provides durability and corrosion resistance, ensuring a stable and reliable electrical connection.
The inductance value of 25 uH helps in filtering out high-frequency interference, maintaining signal integrity and data accuracy.
The compact width allows for easy integration and installation in electronic devices with limited space, making it a convenient choice for manufacturers.
The low DC resistance minimizes power loss and ensures efficient signal transmission, contributing to the overall performance of the data line filter.
The optimal length provides a good balance between space-saving design and effective filtering capabilities, making it a practical choice for various applications.
The tape and reel packaging allows for easy handling, storage, and automated assembly, streamlining the manufacturing process for electronic devices.
The surface mounting type offers secure attachment to circuit boards, saving space and providing mechanical stability in compact electronic devices.
The compact dimensions make this data line filter suitable for small electronic devices and PCB designs, offering flexibility in product integration.
The rated current of 0.5 A ensures compatibility with a wide range of electronic devices and equipment, making it a versatile choice for different applications.
The low height profile enables the data line filter to be easily incorporated into slim and compact electronic devices, enhancing design flexibility and space optimization.
Data Line Filters DR331-253AE attributes and parameters. Explore more Data Line Filters devices from Bourns
Additional Features:
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
DR331-253AE Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - Multiple Series Product Improvement 16/Oct/2020
PCN Assembly/Origin - Magnetic products Oct/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
M39029/56351
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
500X18W104MV4E
Johanson Dielectrics
Johanson Dielectrics' 500X18W104MV4E is a 50V feed through capacitor with matte tin finish. It has a capacitance of 100000uF and dimensions of L2.150xB1.6xH1.27mm, suitable for data line filters applications.
BLM15BD121SN1D
Murata Manufacturing
Murata Manufacturing's BLM15BD121SN1D is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.3 ohm, and an output impedance of 120 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression on data lines.
CIM10U121NC
Samsung Electro-mechanics CIM10U121NC is a chip bead data line filter with 2 terminals, rated for 0.5A current. With dimensions of L1.6XB0.8XH0.8 (mm), it operates b/w -55 to 125 °C and offers 120 OHM output impedance at 100 MHz frequency, making it ideal for surface mount applications in electronic devices.
BLM21PG600SN1D
Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.
LI0805G301R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .7 A; No. of Functions: 1; Terminal Finish: Tin (Sn); Output Impedance (ohm): 300 OHM;
BKP2125HS221-TV
Taiyo Yuden
Taiyo Yuden's BKP2125HS221-TV is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, this surface mount device operates b/w -55 to 85 °C temperatures effectively.
FBMJ3216HM600-T
Taiyo Yuden's FBMJ3216HM600-T is a chip bead data line filter with 2 terminals, rated for 4A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM18AG331SN1D
Murata Manufacturing's BLM18AG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.3Ω at a frequency range of 100MHz, suitable for surface mount applications in electronic devices requiring noise suppression on data lines.
BKH1005LM182-T
BKH1005LM182-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max frequency of 100 MHz, DC resistance of 2 ohm, and output impedance of 1800 OHM. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
ILHB0805ER121V
Vishay Intertechnology
Vishay Intertechnology's ILHB0805ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.03 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
B82789C0513H002
TDK
TDK B82789C0513H002 is an 80V data line filter with 51uH inductance and 0.55 ohm max DC resistance. It has 2 functions, 4 terminals, and operates b/w -55 to 150°C. Ideal for applications requiring a compact surface mount filter with a rated current of 0.25A.
HI3312X101R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .004 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 10 A;
742792640
Wuerth Elektronik & Kg
Wurth Elektronik 742792640 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and output impedance of 300 OHM. Ideal for surface mount applications in electronics to filter frequencies from 100 MHz to 250 MHz.
BLM18EG221SN1
Murata Manufacturing's BLM18EG221SN1 is a FERRITE CHIP data line filter with 220 OHM output impedance, 2A rated current, and -55 to 125°C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
PS1240P02BT
The TDK PS1240P02BT is a Data Line Filter with max operating temp of 70°C and min operating temp of -20°C. It has a diameter of 12.2mm and height of 6.5mm, suitable for through hole mounting applications in various electronic devices.
FBMJ3216HS480NT
Taiyo Yuden's FBMJ3216HS480NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85 °C, offering 48 OHM output impedance and 6A rated current. Ideal for surface mount applications, it measures L3.2XB1.6XH1.1 mm and is constructed with ferrite material for effective noise suppression at frequencies up to 100 MHz.
NFM3DCC221R1H3L
Murata Manufacturing's NFM3DCC221R1H3L is a data line filter with 220uF capacitance, 50V rated voltage, and 0.3A rated current. It features feed through capacitor type and is ideal for applications requiring noise filtering in electronic circuits.
MI0805K400R-10
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 1.5 A; Minimum Operating Temperature: -55 Cel; Length: 2 mm; Dimensions: L2.0XB1.25XH0.9 (mm)/L0.079XB0.049XH0.035 (inch);
BLM15AG100SN1D
Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.
BLM21AG151SN1D
BLM21AG151SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to reduce noise in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DR331-513AE
Bourns
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Minimum Operating Temperature: -40 Cel; Approvals (V): UL; No. of Functions: 2;
DR331-474BE
DATA LINE FILTER; Maximum DC Resistance: .28 ohm; Rated Current: .5 A; Terminal Finish: TIN OVER NICKEL; Length: 7.3 mm; Additional Features: TAPE AND REEL;
DR331-513BE
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Dimensions: L7.3XB5.4XH4.7 (mm)/L0.287XB0.213XH0.185 (inch); Width (mm): 5.4; Height: 4.7 mm;
DR331-105BE
DATA LINE FILTER; Maximum DC Resistance: .4 ohm; Rated Current: .5 A; Maximum Operating Temperature: 135 Cel; Mounting Type: SURFACE MOUNT; Height: 4.7 mm;
DR331-475BE
Bourns DR331-475BE is a UL-approved data line filter with 4700uH inductance, rated at 80V and 0.2A. Its compact dimensions of L7.3xB5.4xH4.7 (mm) make it ideal for surface mount applications in various electronic devices requiring noise suppression on data lines.
DR331-104AE
DATA LINE FILTER; Maximum DC Resistance: .1 ohm; Rated Current: .5 A; Length: 7.3 mm; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
DR332-513AE
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; No. of Terminals: 4; Mounting Type: SURFACE MOUNT; Inductance: 51 uH;
DR332-475AE
DATA LINE FILTER; Maximum DC Resistance: .7 ohm; Rated Current: .5 A; Inductance: 4700 uH; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT;
DR331-225BE
DATA LINE FILTER; Maximum DC Resistance: .7 ohm; Rated Current: .3 A; Width (mm): 5.4; Rated Voltage: 80 V; Minimum Operating Temperature: -40 Cel;
DR331-113BE
DATA LINE FILTER; Maximum DC Resistance: .12 ohm; Rated Current: .5 A; Minimum Operating Temperature: -40 Cel; Dimensions: L7.3XB5.4XH4.7 (mm)/L0.287XB0.213XH0.185 (inch); Terminal Finish: TIN OVER NICKEL;
DR332-253AEE
DATA LINE FILTER; Maximum DC Resistance: .2 ohm; Rated Current: .5 A; Packing Method: TAPE AND REEL; Mounting Type: SURFACE MOUNT; Approvals (V): UL;
DR332-253EE
DATA LINE FILTER; Maximum DC Resistance: .2 ohm; Rated Current: .5 A; No. of Functions: 2; Terminal Finish: TIN; Height: 5 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved