Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns CR2512-JW-101ELF is a 100 ohm fixed resistor with 5% tolerance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM technology, SMT package style, and can operate at 200V. Ideal for surface mount applications requiring a compact rectangular package design.
Median Price
$0.035
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Newark
1+ parts
$0.025
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.170
$0.049
$0.032
Mouser Electronics
$0.027
$0.023
Arrow
Verical
IBS Electronics
$0.029
Nova Conductors
Continental Prestige Electronics
$0.067
Authorized Procurement Solutions
Netroflash
This resistor can safely operate at temperatures up to 70°C, making it suitable for a variety of applications where temperature fluctuations may occur.
The use of metal glaze and thick film technology ensures high stability and reliability in the resistance value, making it a durable choice for long-term use.
With a resistance of 100 ohms, this resistor is ideal for a wide range of circuit designs and applications.
The high maximum operating temperature of 155°C allows this resistor to be used in environments where heat may be a factor, ensuring consistent performance.
The low tolerance of 5% means that the actual resistance value of the resistor will be close to the specified 100 ohms, providing accurate and reliable performance.
With a rated power dissipation of 1 watt, this resistor can handle higher power loads without overheating, making it a versatile choice for demanding applications.
Fixed Resistors CR2512-JW-101ELF attributes and parameters. Explore more Fixed Resistors devices from Bourns
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Resistor Type:
Size Code:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
CR2512-JW-101ELF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.30
SB
8533.21.00.45
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1552200168
Molex
WIRE AND CABLE;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NXP Semiconductors
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Rfe International
RC0402FR-0710KP
Yageo
Yageo's RC0402FR-0710KP is a 10000 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.0625 W and operating voltage of 50 V, it operates b/w -55 to 155 °C. Its metal glaze/thick film technology makes it ideal for compact electronic devices.
CRCW1206100KFKEAE6
Vishay Intertechnology
Vishay Intertechnology CRCW1206100KFKEAE6 is a 100000 ohm fixed resistor with 1% tolerance. It operates at -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for surface mount applications in various electronic circuits due to its compact rectangular chip design.
RT0805FRE0710KL
Yageo's RT0805FRE0710KL is a thin film fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating voltage of 150 V. With a temperature coefficient of 50 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
CRCW0603220RFKEAC
Vishay Intertechnology's CRCW0603220RFKEAC is a 220 ohm fixed resistor with 1% tolerance and 0.1 W power dissipation. It operates b/w -55 to 155 °C, making it suitable for various applications requiring precise resistance values in compact SMT packages. The metal glaze/thick film technology ensures stable performance in diverse environments.
MCT06030C1003FP500
Vishay Intertechnology's MCT06030C1003FP500 is a thin film fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values at temperatures ranging from -55 to 125 °C.
CRCW04020000ZSTD
Vishay Intertechnology's CRCW04020000ZSTD is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. It operates b/w -55 to 155 °C, ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact 0402 size.
ERJ3EKF1004V
Panasonic
The Panasonic ERJ3EKF1004V is a fixed resistor with a resistance of 1M ohm and a tolerance of 1%. It is designed for surface mount applications and has a max operating temperature of 155°C.
CRCW0603330RFKEA
Vishay Intertechnology's CRCW0603330RFKEA is a fixed resistor with 330 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
ACS5SR22J
Arcol Uk
FIXED RESISTOR; Resistance: .22 ohm; Rated Power Dissipation (P): 5 W; Maximum Operating Temperature: 350 Cel; Tolerance: 5 %; Minimum Operating Temperature: -55 Cel;
CRCW1206100RFKEAHP
Vishay Intertechnology's CRCW1206100RFKEAHP is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.75 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 200 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.
CRCW0603220RFKEA
Vishay Intertechnology's CRCW0603220RFKEA is a 220 ohm fixed resistor with 1% tolerance and 0.1 W power dissipation. It operates b/w -55 to 155 °C, making it suitable for various applications requiring precise resistance values in compact SMT packages. The resistor features METAL GLAZE/THICK FILM technology and is ideal for automotive, industrial, and consumer electronics.
CRCW12061R00FKEAHP
Vishay Intertechnology's CRCW12061R00FKEAHP is a fixed resistor with 1 ohm resistance, 1% tolerance, and 0.75 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 200 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.
RK73Z2BTTD
Koa Speer Electronics
RK73Z2BTTD by Koa Speer Electronics is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. With a metal glaze/thick film technology and rectangular construction, it has a temperature range of -55 to 155 °C. Ideal for AEC-Q200 and IEC60115-8 compliant automotive electronics.
RC0603FR-0749R9L
Yageo's RC0603FR-0749R9L is a fixed resistor with 49.9 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
RC0805JR-07100KL
Yageo's RC0805JR-07100KL is a fixed resistor with 100k ohm resistance, 5% tolerance, and 0.125W power dissipation. Ideal for SMT applications, it operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C.
CRCW0603100KFKEAC
Vishay Intertechnology's CRCW0603100KFKEAC is a fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C.
CRCW040222K0FKEDHP
Vishay Intertechnology's CRCW040222K0FKEDHP is a 22000 ohm fixed resistor with 1% tolerance and 0.2 W power dissipation. Ideal for surface mount applications, it operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C. Commonly used in automotive electronics due to AEC-Q200 compliance.
CRCW120610K0FKEA
Vishay Intertechnology's CRCW120610K0FKEA is a 10000 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.25 W and operating voltage of 200 V, it operates b/w -55 to 155 °C making it ideal for various electronic circuits. The metal glaze/thick film technology ensures stable performance in compact SMT packages.
RC0402FR-07220RL
Yageo's RC0402FR-07220RL is a 220 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a max operating temperature of 155°C and power dissipation of 0.0625W, it is ideal for various electronic circuits requiring precise resistance values in compact spaces. The metal glaze/thick film technology ensures stable performance even in harsh environments.
CRCW06034K99FKEAC
Vishay Intertechnology's CRCW06034K99FKEAC is a 4990 ohm fixed resistor with 1% tolerance and 0.1 W power dissipation. Ideal for surface mount applications, it operates b/w -55 to 155 °C, making it suitable for various electronic circuits requiring precise resistance values in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CR2512-J/-000ELF
Bourns
Bourns CR2512-J/-000ELF is a 0 ohm jumper resistor with 1W power dissipation. It features metal glaze/thick film technology, WRAPAROUND terminals, and operates b/w -55°C to 155°C. Ideal for surface mount applications in electronics requiring high temperature resistance.
CR253900F
Meritek Electronics
CR253900F by Meritek Electronics is a chip resistor with a resistance of 390 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 125 °C.
CR2512AF/-1R00ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR2512-FX-10R0ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR2512-JW-102ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR2512-FX-62R0ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 62 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR2512-FX-3300ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 330 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR2512-JW-222ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR254-05T0R1
Vitrohm Portuguesa Lda
FIXED RESISTOR; Resistance: .1 ohm; Rated Power Dissipation (P): 3 W; Maximum Operating Temperature: 350 Cel; Tolerance: 5 %; Package Style (Meter): Axial;
CR251-02T1R
FIXED RESISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 1.1 W; Maximum Operating Temperature: 350 Cel; Tolerance: 2 %;
CR2512-FX-3001ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 3000 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR2512-JW-302ELF
Bourns CR2512-JW-302ELF is a 3000 ohm fixed resistor with 5% tolerance, rated for 1W power dissipation. Its METAL GLAZE/THICK FILM technology and -55 to 155 °C operating temperature range make it ideal for surface mount applications requiring precise resistance values.
CR2512AFX-1801ELF
Bourns CR2512AFX-1801ELF is a 1800 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 1W and operating voltage of 200V, it operates b/w -55°C to 155°C. Ideal for automotive electronics due to AEC-Q200 compliance and compact size (6.3mm x 3.2mm x 0.6mm).
CR252202F
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 22000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
CR2512-JW-182ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1800 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR2512AJ/-000EAS
JUMPER; Mounting Type: SURFACE MOUNT; Resistance: 0 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Packing Method: TR, Embossed, 7 Inch;
CR2512-J/-6R8ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 6.8 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR2512-JW-200ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR2512-FX-15R0ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 15 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR2512-J/-1R0ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved