Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns CR0805AJ/-000EAS is a SMT jumper resistor with 0 ohm resistance, rated for -55 to 155 °C. Ideal for AEC-Q200 applications, it features METAL GLAZE/THICK FILM tech and matte tin over nickel finish in a compact 2x1.25 mm package.
Median Price
$0.010
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
$0.018
1k+ parts
$0.011
10k+ parts
$0.006
DigiKey
$0.019
$0.007
Newark
$0.101
$0.013
-
Master Electronics
Verical
$0.008
Chip1Stop
$0.005
Farnell
$0.009
Element14
Distrelec
Nova Conductors
$0.014
IBS Electronics
Vyrian
ComSIT Distribution GmbH
Semicontronic
$0.003
Argo Parts USA
Netroflash
Corohmni
$0.027
Advanced Electronics
$0.299
$0.284
Aztec Data Supply Inc.
$0.380
Continental Prestige Electronics
$0.004
Ensures stable performance within specified temperature range.
High-quality technology offers reliability and precision in resistance values.
Standard construction for ease of installation.
Convenient and protective packaging for bulk orders.
Ideal for use as a jumper in circuits.
Simple two-terminal design for easy integration.
SMT package style saves space and is suitable for automated assembly.
Wraparound terminals provide secure connection and stability.
High maximum operating temperature for versatile use in various environments.
Low minimum operating temperature ensures functionality in extreme conditions.
Durable terminal finish for long-lasting performance.
Low profile package design for space-constrained applications.
Specifically designed as a jumper for circuit connections.
Compact package size for efficient PCB layout.
Surface mount design for easy and secure installation.
Suitable power dissipation rating for various applications.
Industry-standard reference ensures quality and reliability.
Slim package width for compact circuit designs.
Fixed Resistors CR0805AJ/-000EAS attributes and parameters. Explore more Fixed Resistors devices from Bourns
Additional Features:
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Resistor Type:
Size Code:
Technology:
Terminal Finish:
Terminal Shape:
CR0805AJ/-000EAS Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.30
SB
8533.21.00.45
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
CRCW080520K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080520K0FKEA is a fixed resistor with a resistance of 20000 ohm and a tolerance of 1%. It is designed for surface mount applications and has a max operating temperature of 155 °C. It is commonly used in automotive electronics, telecommunications, and industrial equipment.
RC0603JR-07100KL
Yageo
Yageo's RC0603JR-07100KL is a fixed resistor with 100k ohm resistance, 5% tolerance, and 0.1W power dissipation. Ideal for surface mount applications in electronics due to its small size (1.6mm x 0.8mm) and operating voltage of 75V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 to 155 °C for various electronic circuits.
CRGP0603F10K
TE Connectivity
TE Connectivity's CRGP0603F10K is a 10000 ohm fixed resistor with 1% tolerance and 0.25 W power dissipation. It operates b/w -55 to 155 °C, making it suitable for automotive applications meeting AEC-Q200 standard. With SMT package style, it measures 1.6mm x 0.8mm x 0.45mm in dimensions.
CSR1206FKR500
Stackpole Electronics
CSR1206FKR500 by Stackpole Electronics is a fixed resistor with a resistance of 0.5 ohm and 1% tolerance. It operates b/w -55°C to 155°C, making it suitable for various applications requiring precise resistance values in surface mount technology. The resistor's metal glaze/thick film technology ensures reliable performance in demanding environments.
CRCW06031K00FKEAC
Vishay Intertechnology's CRCW06031K00FKEAC is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
RC0402FR-07120RL
Yageo's RC0402FR-07120RL is a 120 ohm fixed resistor with 1% tolerance. It operates b/w -55°C to 155°C, suitable for surface mount applications with a power dissipation of 0.0625W. Ideal for compact electronic devices requiring precise resistance values.
RCU-0C
TE Connectivity's RCU-0C is a METAL FOIL resistor with 0 ohm resistance. It comes in a RECTANGULAR PACKAGE, SMT style, and WRAPAROUND terminals. Ideal for jumper applications, it operates b/w -55 to 125 °C and measures 1.6mm x 0.8mm x 1.15mm in size.
CRCW040210R0FKED
Vishay Intertechnology's CRCW040210R0FKED is a 10 ohm fixed resistor with 1% tolerance and 100 ppm/°C temperature coefficient. Ideal for surface mount applications, it operates b/w -55 to 155 °C, making it suitable for automotive electronics due to AEC-Q200 compliance.
PCF0805R-120RBT1
Tt Electronics Plc
PCF0805R-120RBT1 by Tt Electronics Plc is a SMT fixed resistor with 120 ohm resistance, 0.1% tolerance, and 0.1W power dissipation. Ideal for surface mount applications in electronics due to its thin film technology and operating voltage of 100V. Temperature coefficient of 25 ppm/°C ensures stable performance from -55 to 125 °C.
CRCW060310R0FKTA
Vishay Intertechnology's CRCW060310R0FKTA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V.
RMCF0603FT100R
RMCF0603FT100R by Stackpole Electronics is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RC0402FR-0775RL
Yageo's RC0402FR-0775RL is a 75 ohm fixed resistor with 1% tolerance and 0.0625 W power dissipation. It operates b/w -55 to 155 °C, making it ideal for SMT applications requiring precise resistance values in a compact package. The metal glaze/thick film technology ensures stable performance in various electronic circuits.
RC0603FR-0747RL
Yageo's RC0603FR-0747RL is a 47 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. With a rated power dissipation of 0.1W and operating voltage of 75V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology makes it ideal for various electronic applications requiring precise resistance values in compact spaces.
1623721-1
TE Connectivity's 1623721-1 is a wire wound fixed resistor with 2 terminals. It has a rated power dissipation of 17W and operates b/w -55°C to 350°C. Ideal for applications requiring high temperature resistance and precise electrical resistance control.
ERJU03F1004V
Panasonic
Panasonic ERJU03F1004V is a SMT fixed resistor with 1% tolerance, 1M ohm resistance, and 0.1W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and operating voltage of 75V. Features metal glaze/thick film technology and can operate b/w -55°C to 155°C.
CRCW06030000Z0EE
Vishay Intertechnology's CRCW06030000Z0EE is a 0 ohm SMT resistor with METAL GLAZE/THICK FILM tech. It operates b/w -55 to 155 °C, ideal for AEC-Q200 applications requiring 0.1 W power dissipation in surface mount setups.
CRCW040215K0FKED
Vishay Intertechnology's CRCW040215K0FKED is a fixed resistor with 15000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 50 V.
RC0201FR-071KL
Yageo's RC0201FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.05 W power dissipation. Ideal for surface mount applications in electronics due to its metal glaze/thick film technology and temperature coefficient of 200 ppm/°C. Operating range from -55 to 125 °C makes it suitable for various electronic devices.
ERJ3EKF10R0V
Panasonic's ERJ3EKF10R0V is a 10 ohm fixed resistor with 1% tolerance and 0.1 W power dissipation. Ideal for surface mount applications, it operates b/w -55 to 155 °C, making it suitable for automotive electronics due to AEC-Q200 compliance and 75 V operating voltage.
CRCW0402120RFKED
Vishay Intertechnology's CRCW0402120RFKED is a fixed resistor with 120 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 50 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CR0805-FX-1002ELF
Bourns CR0805-FX-1002ELF is a 10k ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring precise resistance values. With a power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C making it ideal for various electronic circuits in different environments. The compact rectangular design (2mm x 1.25mm x 0.5mm) with wraparound terminals ensures easy surface mount installation.
CR0805-J/-000ELF
Bourns CR0805-J/-000ELF is a SMT jumper resistor with 0 ohm resistance, rated for -55 to 155 °C. Its metal glaze/thick film tech and 0.125 W power make it ideal for surface mount applications requiring high temp tolerance. Package size: 2x1.25 mm, height 0.5 mm, terminals: wraparound matte tin over nickel finish.
CR0805-FX-1001ELF
Bourns CR0805-FX-1001ELF is a 1000 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Ideal for compact electronic devices requiring precise resistance values in a small SMT package.
CR0805-JW-103ELF
Bourns CR0805-JW-103ELF is a 10000 ohm fixed resistor with a tolerance of 5%. It operates at temperatures ranging from -55 to 155 °C and has a power dissipation of 0.125 W. It is commonly used in surface mount applications requiring high precision resistance.
CR0805-FX-1000ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR0805-FX-1003ELF
Bourns CR0805-FX-1003ELF is a 100000 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C and can handle up to 150V. This rectangular metal glaze/thick film resistor in an 0805 package style is ideal for various electronic circuits requiring precise resistance values.
CR0805-JW-102ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR0805-FX-4701ELF
Bourns CR0805-FX-4701ELF is a 4700 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for applications requiring precise resistance values in compact electronic devices.
CR0805-JW-101ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR0805-FX-1070ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 107 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR0805-FX-1651ELF
Bourns CR0805-FX-1651ELF is a 1650 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for applications requiring precise resistance values in compact electronic devices.
CR0805AFX-10R0ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR0805-FX-1502ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 15000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR0805-FX-2002ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR0805-FX-4702ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR0805-FX-5102ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 51000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
CR0805-JW-472ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR0805-JW-473ELF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
CR0805AJ/-000ELF
JUMPER; Mounting Type: SURFACE MOUNT; Resistance: 0 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Construction: Rectangular;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved