Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns CMF-SDP50-2 is a PTC resettable fuse with 50 ohm resistance, rated for 600V AC. It features dual in-line terminals and gull wing shape, suitable for overload protection applications. Operating temperature ranges from -40°C to 125°C, making it ideal for surface mount installations.
Median Price
$0.950
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.150
100+ parts
$0.807
1k+ parts
$0.634
10k+ parts
$0.529
DigiKey
$1.380
$0.806
-
Master Electronics
$0.583
$0.516
Verical
$0.751
$0.642
Nova Conductors
$0.641
Bristol Electronics
$1.387
$0.513
$0.444
Electro Sonic
$0.690
$0.562
Vyrian
Dan-Mar Components
Corohmni
$0.243
Argo Parts USA
$0.622
Continental Prestige Electronics
$0.629
Netroflash
$0.609
$0.597
This feature allows the thermistor to function as a reliable overload protection device, making it suitable for applications where protection against overcurrent is necessary.
The dual in-line terminal placement offers easy connectivity and installation, making it convenient for use in various electronic circuits.
The rectangular package shape provides a compact design, allowing for space-efficient integration into electronic devices or systems.
The TR, 13 inch packing method ensures secure packaging and transportation of the thermistors, reducing the risk of damage during handling.
With a resistance of 50 ohms, this thermistor can effectively control the flow of current in a circuit, making it a suitable choice for specific applications.
The high rated AC voltage of 600 V makes this thermistor suitable for use in applications where high voltage protection is required.
The gull wing terminal shape offers secure and reliable connections, ensuring stable performance in electronic circuits.
The high maximum operating temperature of 125°C allows the thermistor to withstand elevated temperatures, enhancing its durability and reliability.
The low minimum operating temperature of -40°C ensures the thermistor can function effectively even in cold environments, expanding its range of applications.
The tin terminal finish provides corrosion resistance, ensuring long-term reliability and performance of the thermistor in various operating conditions.
The PTC resettable fuse resistor type offers self-recovery capabilities, providing continuous protection and preventing circuit damage in case of overloads or faults.
With a tolerance of 15%, this thermistor offers accurate and consistent performance within specified limits, ensuring precise control over current flow in electronic circuits.
The surface mounting type allows for easy and secure attachment to circuit boards, enhancing the overall reliability and efficiency of the thermistor in electronic applications.
Non-linear Resistors CMF-SDP50-2 attributes and parameters. Explore more Non-linear Resistors devices from Bourns
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Shape (Package):
Packing Method:
Rated AC Voltage (URac):
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Tolerance:
CMF-SDP50-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Assembly/Origin - CMF Ceramic PTC Oct/2017
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
Fairchild Semiconductor
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NTCS0603E3104JXT
Vishay Intertechnology
NTCS0603E3104JXT by Vishay Intertechnology is a non-linear resistor with a resistance of 100000 ohm and a tolerance of 5%. It is used for temperature sensing applications, with a rated temperature range of -40 to 150 °C.
ERTJ0ER333J
Panasonic
Panasonic ERTJ0ER333J is a NTC thermistor with 33000 ohm resistance, 5% tolerance, and 0.066 W power dissipation. It is used for temperature compensation in applications requiring thermal sensitivity index of 4300 K, operating b/w -40 to 125 °C. The dual-ended SMT package with wraparound terminals makes it suitable for surface mount installations.
B57237-S220-M
TDK
TDK's B57237-S220-M NTC Thermistor has a resistance of 22 ohm with 20% tolerance. Rated for 265V AC, it operates b/w -55°C to 170°C. Ideal for soft start applications due to its thermal sensitivity index of 3060 K.
2920L050DR
Littelfuse
2920L050DR by Littelfuse is a PTC resettable fuse with resistance of 0.35 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. The thermistor has dual-ended terminals, SMT package style, and operates b/w -40°C to 85°C.
NTCS0805E3103FHT
Vishay Intertechnology's NTCS0805E3103FHT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and thermal sensitivity index of 3940 K. It is used for temperature sensing applications in a surface mount package with dual-ended terminals. Operating temperature ranges from -40 to 150 °C.
RF2628-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.25 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE;
1206L020YR
1206L020YR by Littelfuse is a PTC resettable fuse with resistance of 0.65 ohm, operating voltage of 24V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and matte tin finish.
TMOV14RP275E
TMOV14RP275E by Littelfuse is a VARISTOR with 275V max circuit RMS voltage and 110J energy absorption. It operates b/w -55°C to 125°C, ideal for SURGE PROTECTION in various applications. Featuring METAL OXIDE FILM tech, it has radial terminal placement and measures 17mm in height and length, with a width of 9.5mm.
2920L075/60MR
2920L075/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.3 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and operates b/w -40°C to 85°C.
B72220S0271K101
B72220S0271K101 by TDK is a VARISTOR with 275V RMS and 350V DC max circuit voltage. It has a 151J energy capacity, -40 to 105°C operating temp range, and radial package for surge protection in electronic circuits.
B57330V2103F260
B57330V2103F260 by TDK is a NTC thermistor with 10000 ohm resistance and 1% tolerance. It has a thermal sensitivity index of 3435 K, making it ideal for temperature compensation applications. With a max operating temperature of 125°C and surface mounting type, this thermistor offers precise and reliable performance in various electronic devices.
B57237S0100M000
TDK B57237S0100M000 is a NTC thermistor with 10 ohm resistance, 20% tolerance, and 3.1 W power dissipation. It is used for soft start applications at temperatures ranging from -55°C to 170°C. The radial package has a height of 22 mm, length of 15 mm, and width of 7 mm for through-hole mounting.
MF-USMF010-2
Bourns
The Bourns MF-USMF010-2 is a PTC resettable fuse with resistance of 0.8 ohm, operating voltage of 30V, and dual-ended terminals in a rectangular SMT package. It is used for overcurrent protection applications, featuring gold over nickel terminal finish and AEC-Q200, CUL, TUV, UL standards compliance.
B57230V2103F260
B57230V2103F260 by TDK is a NTC thermistor with 10000 ohm resistance and 1% tolerance. It has dual-ended terminals, SMT package style, and operates b/w -55 to 125 °C. Ideal for temperature sensing applications, it offers a rated power dissipation of 0.15 W in a compact package measuring 1mm x 0.5mm x 0.6mm.
SG200
Rti Electronics
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 65 Cel; Shape (Package): DISK PACKAGE; Minimum Operating Temperature: -40 Cel;
MF-NSMF012-2
Bourns MF-NSMF012-2 is a PTC resettable fuse with 1.35 ohm resistance, operating at 30V. Its dual-ended terminals and SMT package make it suitable for automotive applications, meeting AEC-Q200, CUL, TUV, and UL standards. With a temperature range of -40 to 85°C, it offers reliable protection in compact dimensions (3.4mm x 1.8mm x 1.1mm).
0ZCF0075AF2C
Bel Fuse
Bel Fuse's 0ZCF0075AF2C is a PTC resettable fuse with resistance of 0.18 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used for temperature sensing applications with dual-ended terminals in surface mount package style.
55015
Ysi
NTC THERMISTOR; No. of Terminals: 2;
MF-SM075/60-2-99
Bourns MF-SM075/60-2-99 is a PTC resettable fuse with 60V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in various applications due to its dual-ended terminals and surface mounting type.
NTC0805J100K
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CMF-SD50-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Tolerance: 20 %; Terminal Shape: GULL WING; No. of Terminals: 4;
CMF-SDP25A-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %; No. of Terminals: 4;
CMF-SDP35A-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 35 ohm; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: 15% and -20% tolerance is available;
CMF-SDP05-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %; Terminal Shape: GULL WING;
CMF-SDP75A-20-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 75 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %; Terminal Placement: DUAL IN-LINE;
CMF-SD35-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 35 ohm; Tolerance: 20 %; Thermistor Application: OVERLOAD PROTECTION; No. of Terminals: 4;
CMF-SD50A-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Tolerance: 20 %; Terminal Shape: GULL WING; Packing Method: TR, 13 INCH;
CMF-SD50A0
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Tolerance: 20 %; Terminal Placement: DUAL IN-LINE; Packing Method: BULK;
CMF-SDP07-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 7 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %; Shape (Package): RECTANGULAR PACKAGE;
CMF-SD50-10-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Tolerance: 10 %; Terminal Placement: DUAL IN-LINE; Packing Method: TR, 13 INCH;
CMF-SD50A-10-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Tolerance: 10 %; Packing Method: TR, 13 INCH; Thermistor Application: OVERLOAD PROTECTION;
CMF-SD50
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Tolerance: 20 %; Terminal Placement: DUAL IN-LINE; Thermistor Application: OVERLOAD PROTECTION;
CMF-SDP10-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %; Shape (Package): RECTANGULAR PACKAGE;
CMF-SDP10A-20-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %; Minimum Operating Temperature: -40 Cel;
CMF-SDP25-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 25 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %; Terminal Finish: Tin (Sn);
CMF-SDP25A-20-2
CMF-SDP35-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 35 ohm; Maximum Operating Temperature: 125 Cel; No. of Terminals: 4; Rated AC Voltage (URac): 600 V;
CMF-SDP35A-15-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 35 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 15 %; Packing Method: TR, 13 INCH;
CMF-SDP50A-15-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 50 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 15 %; No. of Terminals: 4;
CMF-SDP75-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 75 ohm; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved