Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Bourns CG0603MLU-12E is a varistor with 12V operating voltage, suitable for surface mount applications. It features a metal oxide film technology, dual-ended terminals, and can operate in temperatures ranging from -40°C to 125°C. Ideal for surge protection in electronic circuits.
Median Price
$0.183
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.320
100+ parts
$0.166
1k+ parts
$0.145
10k+ parts
$0.128
DigiKey
$0.165
$0.138
$0.132
Master Electronics
-
Verical
$0.121
Arrow
$0.122
Newark
$0.162
$0.136
$0.126
Chip1Stop
$0.129
Farnell
$0.232
$0.151
$0.143
Element14
$0.265
$0.168
$0.150
DF Sales Co.
$0.100
IBS Electronics
$0.258
Electro Sonic
$0.135
TME
$0.160
ComSIT Distribution GmbH
Nova Conductors
Perfect Parts
Continental Prestige Electronics
$0.204
$0.104
Aranea Global
Dual ended terminal placement allows for easy and secure connection, increasing reliability of the product.
Metal oxide film technology offers high stability and reliability in a wide range of operating conditions.
Rectangular package shape makes it easy to handle and install in various electronic devices.
TR packing method on 7 inch paper reel ensures convenient storage and transportation of the product.
Having only 2 terminals simplifies the installation process and reduces chances of error.
Surface mount technology allows for efficient PCB assembly and space-saving design.
Wraparound terminal shape provides a strong mechanical connection, enhancing product durability.
High maximum operating temperature ensures the varistor can withstand challenging environments.
Low minimum operating temperature allows the varistor to function reliably in cold conditions.
Tin finish with nickel barrier provides excellent conductivity and corrosion resistance for long-term performance.
Low package height allows for compact design and easy integration into electronic devices.
Varistor type offers voltage protection and transient suppression capabilities, making it ideal for various applications.
Operating voltage of 12V is suitable for many electronic systems, offering reliable voltage protection.
Compact package length enables space-efficient placement on PCBs without sacrificing performance.
Surface mounting type simplifies the assembly process and enables automated production.
Narrow package width allows for flexibility in design and saves valuable PCB space.
Non-linear Resistors CG0603MLU-12E attributes and parameters. Explore more Non-linear Resistors devices from Bourns
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
CG0603MLU-12E Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Transistor
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
International Semiconductor
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Nexperia
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1206L050/15YR-A
Littelfuse
PTC RESETTABLE FUSE;
B59850C0120A070
TDK
B59850C0120A070 by TDK is a PTC thermistor with 10 ohm resistance and rated AC voltage of 230V. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -40 to 125 °C.
NTCS0603E3103FHT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3103FHT is a NTC thermistor with 10000 ohm resistance, 1% tolerance, and 3960 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its -40 to 150 °C operating range and AEC-Q200, CUL, UL certifications.
ES110-0001
Honeywell Sensing And Control
ES110-0001 by Honeywell Sensing And Control is a NTC thermistor with 2000 ohm resistance, 5% tolerance, and thermal sensitivity index of 3468 K. It is used for temperature sensing applications in a rectangular package with panel mount terminal shape. Operating temperatures range from -40 to 150 °C.
RUEF400
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 30 V;
V18MLA0805LNHAUTO
V18MLA0805LNHAUTO by Littelfuse is a VARISTOR with 18V operating voltage, 0.1J energy capacity, and 14V RMS circuit voltage. It is used in automotive applications due to AEC-Q200 standard compliance and surface mounting type.
MF-PSMF110X-2
Bourns
Bourns MF-PSMF110X-2 is a PTC resettable fuse with resistance of 0.06 ohm, dual-ended terminals, and SMT package style. Ideal for overcurrent protection applications, it has a max operating temperature of 85°C and min of -40°C. The rectangular package measures 2.3mm in length, 1.5mm in width, and 1.25mm in height for surface mounting method.
NTC0805J100K
TE Connectivity
TE Connectivity's NTC0805J100K is a 100k ohm NTC thermistor with 5% tolerance. It operates b/w -55°C to 125°C, making it ideal for temperature sensing applications. With a thermal sensitivity index of 4100 K, this surface mount thermistor offers accurate and reliable performance in compact devices.
NTCS0402E3473FXT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 47000 ohm; Rated Power Dissipation (P): .07 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
B72210-S271-K101
TDK's B72210-S271-K101 varistor has a max energy capacity of 43J, operating voltage of 350V, and max circuit RMS voltage of 275V. Ideal for surge protection in applications requiring non-linear resistors with radial terminal placement and disk package shape.
1206L150THWR
1206L150THWR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 8V, and max temp of 85°C. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and SMT package style. The thermistor has a compact size (3.4mm x 1.8mm x 1mm) and meets standards like CUL, TUV, and UL.
TD5A
TD5A by Honeywell Sensing And Control is a PTC thermistor with 3 terminals, radial placement, and rectangular package. It operates b/w -40°C to 150°C, primarily used for temperature sensing applications with through-hole mounting.
ASMD100F-2
TE Connectivity's ASMD100F-2 is a PTC resettable fuse with 0.098 ohm resistance, 30V operating voltage, and -40 to 85°C temperature range. It features dual-ended terminals for overcurrent protection in surface mount applications. AEC-Q200 and TS 16949 compliant, it offers reliable circuit protection in compact SMT packages.
MINISMDC050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .62 mm; Packing Method: TR, EMBOSSED, 7 INCH;
MF-MSMF014-2
The Bourns MF-MSMF014-2 is a PTC resettable fuse with resistance of 0.4 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications, featuring dual-ended terminals and SMT package style. With AEC-Q200, CUL, TUV, and UL certifications, it ensures reliable performance from -40 to 85°C.
MINIASMDC050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Operating Voltage: 24 V; Package Style (Meter): SMT;
0ZCG0075BF2B
Bel Fuse
Bel Fuse's 0ZCG0075BF2B is a PTC resettable fuse with resistance of 0.11 ohm, operating voltage of 33V, and rated power dissipation of 1W. Ideal for temperature sensing applications, it features dual-ended terminals in a surface mount package style.
V5.5MLA0805LNH
V5.5MLA0805LNH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is ideal for surge protection in SMT applications at temperatures ranging from -40 to 125°C.
16R1000GMR
16R1000GMR by Littelfuse is a PTC resettable fuse with resistance of 0.004 ohm, operating voltage of 16V, and max temp of 85°C. Ideal for overcurrent protection in various applications due to its radial terminal placement and rectangular package shape. CUL, TUV, UL certified for quality assurance.
B57364S0100M000
TDK B57364S0100M000 is a NTC thermistor with 10 ohm resistance, 20% tolerance, and 5.1 W power dissipation. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -55 to 170 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CG0603MLC-05E
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 5 V; Terminal Finish: SILVER; Terminal Placement: DUAL ENDED;
CG0603MLA-5.5ME
Bourns CG0603MLA-5.5ME is a varistor with 5.5V operating voltage, 0.1J energy capacity, and 4V RMS voltage. It's a surface mount device with dual-ended terminals, metal oxide film technology, and nickel barrier finish. Ideal for surge protection in electronics due to its compact rectangular package design.
CG0603MLC-05LE
Bourns CG0603MLC-05LE is a varistor with 25V max RMS voltage and 5V operating voltage. It has dual-ended terminals, rectangular package, and operates b/w -40°C to 85°C. Ideal for surface mount applications in automotive electronics meeting AEC-Q200 standards.
CG0603MLC-05LEA
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 5 V; Terminal Finish: TIN OVER NICKEL; Shape (Package): RECTANGULAR PACKAGE;
CG0603MLC-3.3LE
Bourns CG0603MLC-3.3LE is a VARISTOR with 3.3V operating voltage, 25V max RMS voltage, and -40 to 85°C temp range. It's a surface mount resistor used in non-linear applications for surge protection due to its dual-ended terminals and rectangular package design.
CG0603MLA-18KE
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2; Technology: METAL OXIDE FILM; JESD-609 Code: e3;
CG0603MLC-3.3LEA
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Shape (Package): RECTANGULAR PACKAGE; Terminal Finish: TIN OVER NICKEL;
CG0603MLU-05E
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Height (Package): .45 mm; Technology: METAL OXIDE FILM;
CG0603MLC-12LE
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Maximum Circuit RMS Voltage: 25 V; Operating Voltage: 12 V; Terminal Finish: Tin/Nickel (Sn/Ni);
CG0603MLU-24E
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Packing Method: TR, PAPER, 7 INCH; Terminal Shape: WRAPAROUND; Operating Voltage: 24 V;
CG0603MLE-18E
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): .8 mm; Operating Voltage: 18 V; Shape (Package): RECTANGULAR PACKAGE;
CG0603MLC-12E
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Terminal Shape: WRAPAROUND; No. of Terminals: 2;
CG0603MLC-24LE
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin/Nickel (Sn/Ni); Maximum Circuit DC Voltage: 24 V; JESD-609 Code: e2;
CG0603MLA-26KE
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Package Style (Meter): SMT; Packing Method: TR, PAPER, 7 INCH; Height (Package): .8 mm;
CG0603MLD-12E
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Width (Package): .8 mm; Packing Method: TR, PAPER, 7 INCH; Length (Package): 1.6 mm;
CG0603MLC-05EA
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; No. of Terminals: 2; Height (Package): .45 mm;
CG0603MLC-12EA
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Width (Package): .8 mm; Technology: THIN FILM; Terminal Shape: WRAPAROUND;
CG0603MLC-3.3EA
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Shape: WRAPAROUND; Thermistor Application: ESD PROTECTION; Width (Package): .8 mm;
CG0603MLU-3.3E
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Length (Package): 1.6 mm; Width (Package): .8 mm; JESD-609 Code: e3;
CG0603MLU5E
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Voltage: 5 V; JESD-609 Code: e3; No. of Terminals: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved