Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns CG0402MLA-5.5MG is a varistor with 5.5V operating voltage, 0.05J energy capacity, and 4V max RMS voltage. Ideal for surge protection in SMT applications due to its metal oxide film technology and dual-ended terminal placement.
Median Price
$0.053
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.100
100+ parts
$0.044
1k+ parts
$0.035
10k+ parts
$0.032
Mouser Electronics
$0.036
$0.030
Verical
-
$0.028
Chip1Stop
$0.021
Newark
$0.081
Element14
$0.037
Farnell
$0.033
Nova Conductors
$0.042
IBS Electronics
$0.034
Vyrian
Argo Parts USA
$0.068
$0.065
Netroflash
Perfect Parts
Continental Prestige Electronics
$0.024
$0.017
Abacus Technologies
Dual ended terminal placement allows for easy installation and connection in circuits.
Metal oxide film technology provides high reliability and stability in various operating conditions.
Rectangular package shape enables space-saving and efficient PCB layout designs.
With a maximum energy absorbing capacity of 0.05 J, this product offers excellent protection against voltage surges.
The TR, paper, 7-inch packing method ensures secure and convenient storage and transportation.
With 2 terminals, this non-linear resistor is easy to connect in circuit applications.
SMT package style allows for reliable surface mounting onto PCBs.
Wraparound terminal shape provides excellent mechanical strength and solderability.
A high maximum operating temperature of 125°C ensures reliable performance in various environments.
With a minimum operating temperature of -55°C, this product is suitable for harsh operating conditions.
The low height of 0.5 mm makes this resistor ideal for compact electronic devices.
Varistor type provides excellent voltage regulation and protection against electrical transients.
With a maximum circuit RMS voltage of 4 V, this product is suitable for low voltage applications.
An operating voltage of 5.5 V allows for stable performance in various electronic systems.
The length of 1 mm provides flexibility in mounting and fitting in tight spaces.
Surface mounting type offers easy and secure installation on PCBs.
A maximum circuit DC voltage of 5.5 V ensures safe operation within specified voltage limits.
The compact width of 0.5 mm enables efficient PCB space utilization.
Non-linear Resistors CG0402MLA-5.5MG attributes and parameters. Explore more Non-linear Resistors devices from Bourns
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Resistor Type:
Sub-Category:
Technology:
Terminal Placement:
Terminal Shape:
Operating Voltage:
CG0402MLA-5.5MG Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Bkc Semiconductors
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
Transys Electronics
General Instrument
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Semiconductor
2016L030DR
Littelfuse
2016L030DR by Littelfuse is a PTC resettable fuse with resistance of 0.5 ohm, operating voltage of 60V, and dual-ended terminals. It is used for overcurrent protection in surface mount applications. Dimensions are 5.44mm x 4.43mm x 1.25mm with a max operating temperature of 85°C and min of -40°C.
B72210-S300-K101
The TDK B72210-S300-K101 is a VARISTOR with 30V URac and 4.4J energy capacity. It operates b/w -40°C to 85°C, suitable for surge protection in electronic circuits. With radial terminal placement and metal oxide film technology, it offers reliable overvoltage protection in bulk packaging.
RXEF030-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Shape (Package): DISK PACKAGE; Terminal Placement: RADIAL;
EZJZ0V220HA
The Panasonic EZJZ0V220HA is a VARISTOR resistor with dual-ended terminals, suitable for surface mount applications. It has a max operating temperature of 85°C and can handle an operating voltage of 13V. With a rectangular package style and wraparound terminals, it is ideal for circuit protection in various electronic devices.
2920L110/60MR
2920L110/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.12 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and matte tin finish, it operates b/w -40 to 85 °C.
111-202CAK-H01
Fenwal Electronics
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Maximum Operating Temperature: 300 Cel; Terminal Shape: WIRE; Minimum Operating Temperature: -60 Cel;
1210L020WR
1210L020WR by Littelfuse is a PTC resettable fuse with resistance of 0.8 ohm, operating voltage of 30V, and max temp of 85°C. It's used for overcurrent protection in SMT applications with dual-ended terminals and matte tin finish.
NTCS0603E3222FMT
Vishay Intertechnology
Vishay Intertechnology's NTCS0603E3222FMT is a 2200 ohm NTC thermistor with dual-ended terminals and 1% tolerance. Ideal for temperature sensing applications, it has a thermal sensitivity index of 3520 K and operates b/w -40 to 150 °C. This SMT package features wraparound terminals in a rectangular shape, suitable for surface mounting.
B57321V2103J60
B57321V2103J60 by TDK is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 3980 K thermal sensitivity index. It is used for temperature compensation in various applications due to its dual-ended terminal placement and surface mount package style. With an operating temperature range from -55°C to 125°C, it offers precise thermal sensing capabilities.
RXEF050S
TE Connectivity
TE Connectivity's RXEF050S is a PTC resettable fuse with rated AC voltage of 72V. Its dimensions are 7.9mm x 3mm x 13.7mm, suitable for temperature sensing applications. With radial terminal placement and through-hole mounting, it meets CSA, TUV, and UL standards.
RF2577-000
TE Connectivity's RF2577-000 is a PTC resettable fuse with 20 ohm resistance and rated AC voltage of 60V. Ideal for temperature sensing applications, it features radial terminal placement in a disk package. With a max operating temp of 85°C and through-hole mounting, it offers 0.22W power dissipation for reliable performance.
NANOSMDC016F-2
TE Connectivity's NANOSMDC016F-2 is a PTC thermistor with 5 ohm resistance and 0.5 W power dissipation. It features dual-ended terminals, rated for 10 V AC voltage, ideal for overload protection applications. This surface-mount device has a rectangular package and operates up to 85°C temperature.
NTCS0805E3103JHT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .21 W; Maximum Operating Temperature: 150 Cel; Tolerance: 5 %;
TRF250-145
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 3 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE; Minimum Operating Temperature: -40 Cel;
NTCLE100E3333JB0
Vishay Intertechnology's NTCLE100E3333JB0 is a 33000 ohm NTC thermistor with thermal sensitivity index of 4090 K. Ideal for temperature sensing applications, it has a rated temperature range from -40 to 125 °C and a tolerance of 5%. The radial package with wire terminals makes it suitable for through hole mounting.
PESD0402-240
PESD0402-240 by Littelfuse is a VARISTOR with 24V operating voltage, METAL GLAZE/THICK FILM tech, and DUAL ENDED terminal placement. Ideal for surge protection in automotive electronics due to AEC-Q200 compliance and compact SMT package (0.6mm x 1.1mm x 0.43mm).
LVR025K-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.3 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Maximum Circuit DC Voltage: 240 V;
2920L075/60MR
2920L075/60MR by Littelfuse is a PTC resettable fuse with resistance of 0.3 ohm and operating voltage of 60V. It is used for overcurrent protection in various applications. This surface mount thermistor has dual-ended terminals, rectangular package shape, and operates b/w -40°C to 85°C.
V33MLA1206NHAUTO
Littelfuse V33MLA1206NHAUTO is a varistor with 33V operating voltage and 0.8J energy capacity. Ideal for automotive applications, it has dual-ended terminals, metal oxide technology, and AEC-Q200 standard compliance.
MICROSMD075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 6 V; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CG0402MLU-12G
Bourns
The Bourns CG0402MLU-12G is a varistor with 12V operating voltage, -40 to 125°C temp range. It has dual-ended terminals, metal oxide film tech, and SMT package style. Ideal for surge protection in electronic circuits due to its compact size and high reliability.
CG0402MLC-05LG
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Maximum Circuit DC Voltage: 5 V; Maximum Circuit RMS Voltage: 25 V;
CG0402MLC-3.3LGA
CG0402MLC-3.3LGA by Bourns is a surface mount varistor with a max operating temperature of 125°C and a min operating temperature of -40°C. It has a max circuit RMS voltage of 25V and an operating voltage of 3.3V. This component is commonly used in non-linear resistor applications.
CG0402MLC-3.3LG
Bourns CG0402MLC-3.3LG is a VARISTOR with 3.3V operating voltage, suitable for surface mount applications. It has a max circuit RMS voltage of 25V and operates b/w -40°C to 85°C. Ideal for protecting electronic circuits from overvoltage conditions in various devices.
CG0402MLC-05LGA
CG0402MLC-05LGA by Bourns is a rectangular package varistor with dual-ended terminal placement. It has a max operating temperature of 125°C and can handle a max circuit RMS voltage of 25V. This surface mount resistor is commonly used for surge protection in electronic circuits.
CG0402MLU-3.3G
CG0402MLU-3.3G by Bourns is a varistor with 3.3V operating voltage, -40 to 125°C temp range, and metal oxide film technology. It has dual-ended terminals in a rectangular SMT package for surface mounting applications. Ideal for protecting electronic circuits from overvoltage conditions.
CG0402MLU33G
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Packing Method: TR, PAPER, 7 INCH; Terminal Placement: DUAL ENDED;
CG0402MLE-18G
Bourns CG0402MLE-18G is a varistor with 18V operating voltage and 8.5V max RMS voltage, suitable for surface mount applications. It has a dual-ended terminal placement in a rectangular SMT package, with temperature range from -55°C to 125°C. Ideal for circuit protection in compact electronic devices.
CG0402MLU-24G
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Package Style (Meter): SMT; Width (Package): .5 mm; Terminal Shape: WRAPAROUND;
CG0402MLA-14LG
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Voltage: 14 V; Package Style (Meter): SMT; Shape (Package): RECTANGULAR PACKAGE;
CG0402MLU-05G
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Package Style (Meter): SMT; Terminal Finish: MATTE TIN OVER NICKEL; Height (Package): .36 mm;
CG0402MLA-14KG
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Voltage: 14 V; No. of Terminals: 2; Maximum Circuit RMS Voltage: 11 V;
CG0402MLA-18KG
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Operating Voltage: 18 V; Terminal Shape: WRAPAROUND; Packing Method: TR, PAPER, 7 INCH;
CG0402MLD-12G
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Length (Package): 1 mm; Operating Voltage: 12 V; Minimum Operating Temperature: -30 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved