Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
7116-RC by Bourns is a UL-approved data line filter with 2 functions and 4 terminals. Featuring inductance of 6800 uH, it has a max DC resistance of 0.2 ohm. Ideal for applications requiring filtering in data lines, it operates b/w -55 to 105 °C temperature range.
Median Price
$3.432
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
$3.878
1k+ parts
$3.276
10k+ parts
$3.136
Arrow
$2.987
$2.579
$2.332
Vyrian
VNN
Electro Sonic
$3.570
$2.940
$2.880
IBS Electronics
$3.601
$3.042
$2.730
Nova Conductors
Advanced Electronics
$0.721
$0.656
$0.591
Corohmni
$2.217
Ampacity Inc.
$2.290
Futuretech Components
Authorized Procurement Solutions
Perfect Parts
Aranea Global
Having UL approval ensures that this data line filter meets strict safety and quality standards, giving you peace of mind when using it in your electronic devices.
With 2 functions, this data line filter can effectively filter out noise and interference in your data lines, ensuring clean and reliable data transmission.
With 4 terminals, this data line filter provides a secure and stable connection to your data lines, reducing the risk of signal loss or interference.
Being a data line filter, this product is specifically designed to filter out noise and interference from data lines, ensuring smooth and uninterrupted data transmission.
With a maximum operating temperature of 105°C, this data line filter can withstand high temperatures, making it suitable for a wide range of electronic applications.
With a minimum operating temperature of -55°C, this data line filter can operate in cold environments without losing its effectiveness, providing reliable performance in various conditions.
With an inductance of 6800 uH, this data line filter can effectively filter out unwanted high-frequency noise, ensuring clean and reliable data transmission.
With a width of 13.97 mm, this data line filter has a compact design, making it easy to integrate into your electronic devices without taking up too much space.
With a maximum DC resistance of 0.2 ohm, this data line filter offers low resistance to the flow of direct current, ensuring minimal signal loss and maximum efficiency in data transmission.
With a length of 20.32 mm, this data line filter has a compact and space-saving design, making it suitable for use in small electronic devices or crowded circuit boards.
Featuring a through-hole mount design, this data line filter can be easily and securely mounted onto a circuit board, providing stable and reliable connection to your data lines.
With dimensions of L20.32XB13.97XH20.32 (mm)/L0.8XB0.55XH0.8 (inch), this data line filter has a compact and versatile size, making it suitable for a wide range of electronic applications.
With a rated current of 2 A, this data line filter can safely handle high current loads, making it suitable for use in power-hungry electronic devices or data lines.
With a height of 20.32 mm, this data line filter has a low profile design, making it suitable for applications where space is limited or where a slim form factor is desired.
Data Line Filters 7116-RC attributes and parameters. Explore more Data Line Filters devices from Bourns
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Rated Current:
Width (mm):
7116-RC Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - 7100 Series Multiple Changes Jul/2016 Mult Devs Product Improvement 23/Aug/2021
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NXP Semiconductors
LM555CMX
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Eic Semiconductor
Sangdest Microelectronics (Nanjing)
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1554216004
Molex
WIRE AND CABLE;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
Bytesonic Electronics
Infineon Technologies
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Fagor Electronica S Coop
NFM41PC204F1H3L
Murata Manufacturing
Murata Manufacturing's NFM41PC204F1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 200000 uF capacitance. It is a feed through capacitor used in applications requiring surface mount filters for noise suppression and signal conditioning.
MMZ1608R102ATA00
TDK
TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.
BNX012-01
Murata Manufacturing's BNX012-01 is a data line filter with 2 functions and rated voltage of 50V. With max insertion loss of 40dB, it operates b/w -40 to 125 °C. Ideal for applications requiring high insulation resistance and output impedance of 50 OHM.
FBMJ3216HS480NT
Taiyo Yuden
Taiyo Yuden's FBMJ3216HS480NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85 °C, offering 48 OHM output impedance and 6A rated current. Ideal for surface mount applications, it measures L3.2XB1.6XH1.1 mm and is constructed with ferrite material for effective noise suppression at frequencies up to 100 MHz.
PA3747.905NL
Pulse Electronics
PA3747.905NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It operates b/w -40 to 125 °C and has an inductance of 6030 uH. Ideal for applications requiring high output impedance and rated current of 1.45 A.
CM3421Y600R-10
Steward
DATA LINE FILTER; Maximum DC Resistance: .0007 ohm; Rated Current: 15 A; No. of Terminals: 4; Height: 2.85 mm; Output Impedance (ohm): 60 OHM;
744227S
Wuerth Elektronik & Kg
744227S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.16 ohm, and output impedance of 5500 ohm. Ideal for surface mount applications requiring a compact L9.2xB6.0xH5.0mm size and rated current of 1A.
MI0603J601R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
FBMH1608HM601-T
Taiyo Yuden's FBMH1608HM601-T is a chip bead data line filter with 2 terminals, rated for 0.7A current and 600 ohm output impedance. With dimensions of 1.6x0.8x0.8mm, it operates b/w -40°C to 85°C, ideal for noise suppression in high-frequency applications up to 100MHz.
Laird Technologies
Laird Technologies' MI0603J601R-10 is a chip bead data line filter with 2 terminals, operating from -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.2 ohm and an output impedance of 600 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1A and is commonly used in electronic devices requiring noise suppression on data lines.
MMZ1608R601ATA00
TDK MMZ1608R601ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with DC resistance of 0.4 ohm. Ideal for data line filtering applications due to its compact size and high output impedance of 600 OHM.
ILHB0603RK121V
Vishay Intertechnology
Vishay Intertechnology's ILHB0603RK121V is a FERRITE CHIP filter with 2 terminals, 120 OHM output impedance, and 2A rated current. Ideal for data line applications, it operates b/w -55°C to 125°C and has a compact size of L1.6xB0.8xH0.8 mm for surface mount installation.
DLM11SN900HY2L
Murata's DLM11SN900HY2L is a Data Line Filter with 2 functions, rated at 5V. It offers a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring filtering in data lines due to its compact dimensions of L1.25xB1.0xH0.5 mm and surface mounting type.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
MPZ2012S101AT000
TDK's MPZ2012S101AT000 is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. This ferrite chip filter has dimensions of L2.0xB1.25xH0.85 mm and rated current of 4A, suitable for surface mounting in various electronic devices.
PA4339.501NLT
PA4339.501NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 4uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with a max current rating of 5A.
782633601
Wurth Elektronik 782633601 is a surface mount data line filter with AEC-Q200 screening. Features include FERRITE BEAD filter type, 1A rated current, and 600Ω output impedance. Ideal for automotive applications requiring noise suppression in compact spaces.
7116
Jw Miller Magnetics
DATA LINE FILTER; Maximum DC Resistance: .6 ohm; Dimensions: L10.16XB5.08XH8.89 (mm)/L0.4XB0.2XH0.35 (inch); Width (mm): 5.08; Height: 8.89 mm; Length: 10.16 mm;
MI0805K601R-10
MI0805K601R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 600 OHM. Ideal for surface mount applications, it has a max DC resistance of 0.1 ohm and can handle a rated current of 1.5 A efficiently.
BNX002-11
Murata Manufacturing's BNX002-11 is a 50V rated data line filter with 100 Mohm insulation resistance. With dimensions of L12.0xB11.0xH12.5 (mm), it operates b/w -40 to 85 °C and has an output impedance of 50 OHM. Ideal for applications requiring noise suppression in data lines, this filter has a rated current of 10A and is mounted through hole.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Bourns
The Bourns 7116 is a data line filter with two functions. It has a maximum operating temperature of 105°C and a minimum operating temperature of -55°C. The inductance is 8000 uH and the maximum DC resistance is 0.2 ohm. It is a through-hole mount and rated for a current of 2 A.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved