Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 22000 ohm; Rated Power Dissipation (P): 1.12 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Resistor Networks & Arrays 4814P-T01-223FLF attributes and parameters. Explore more Resistor Networks & Arrays devices from Bourns
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Spacing (Lead):
Manufacturer Series:
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Resistor Type:
Series:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Temperature Coef Tracking:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
4814P-T01-223FLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Rectron
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Ksl Microdevices
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BCN4D105J7
Tt Electronics Plc
BCN4D105J7 by Tt Electronics Plc is a 0.125W resistor array with 1000000 ohm resistance, suitable for SMT mounting. Operating voltage of 75V and temperature range from -55 to 155 °C make it ideal for various electronic applications requiring precise resistance values in compact spaces. The chip package with matte tin finish and nickel barrier ensures reliable performance in isolated network configurations.
PRA100I4-1KBLNT
Vishay Intertechnology's PRA100I4-1KBLNT resistor network features 4 functions, 1000 ohm resistance, and 0.1% tolerance. Ideal for surface mount applications with a rated power dissipation of 0.1 W and operating voltage of 50 V. Suitable for use in various electronic circuits requiring precise resistance values.
4816P-T01-103LF
Bourns
Bourns 4816P-T01-103LF is a resistor network with 8 functions, isolated type, and resistance of 10k ohm. It has a power dissipation of 0.16W, operates b/w -55 to 125°C, and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Y4485V0001QT9R
Vishay Foil Resistors
ARRAY/NETWORK RESISTOR; Resistance: 10000 ohm; Rated Power Dissipation (P): .05 W; Maximum Operating Temperature: 125 Cel; Tolerance: .02 %; No. of Terminals: 3;
Y0006V0483FF0L
Vishay Precision Group
Vishay Precision Group's Y0006V0483FF0L resistor network features 2 elements with resistances of 8060 ohm and 20000 ohm, rated at 0.2W power dissipation and operating voltage of 200V. With a temperature coefficient of 0.5 ppm/°C, it is ideal for precision applications requiring high accuracy in temperature tracking. The through-hole mount package makes it suitable for diverse electronic circuit designs.
BCN164AB122J7
BCN164AB122J7 by Tt Electronics Plc is a resistor network with 4 functions, 1200 ohm resistance, and 0.063 W power dissipation. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and operating voltage of 50V. With a temperature coefficient of 200 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
77081511P
Cts
Cts 77081511P resistor network with 7 elements, 510 ohm resistance, and 0.125 W power dissipation. Ideal for through-hole mounting applications requiring a tolerance of 2% and operating voltage up to 100 V. Features CERMET technology in a rectangular package with bussed network type.
742C083681JP
The Cts 742C083681JP resistor network has a power dissipation of 0.063W, resistance of 680 ohm, and operates at temperatures b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and isolated network type.
EXBN8VR000X
The Panasonic EXBN8VR000X is a resistor network with 4 functions, METAL GLAZE/THICK FILM technology, and 0 ohm resistance. It is used in applications requiring surface mounting type, with a package size of 2mm x 1mm x 0.45mm. Operating temperature range from -55°C to 125°C makes it suitable for various electronic devices.
RM2012B103/203PBVW10
Thin Film Technology
RM2012B103/203PBVW10 by Thin Film Tech is a 0.1W resistor array with 2 functions, offering 10000 ohm and 20000 ohm resistances with 0.1% tolerance. Its thin film tech and 5 ppm/°C temp coef tracking make it ideal for precise applications in isolated networks requiring surface mounting.
EXB38V183JV
Panasonic EXB38V183JV is a 4-function resistor network with 18000 ohm resistance, rated for 0.063 W power dissipation at temperatures from -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and isolated network type.
RM2012A103/903PBVW10
RM2012A103/903PBVW10 by Thin Film Technology is a 0.1W resistor array with two elements: 10kΩ and 90kΩ, offering 0.1% tolerance and 5ppm/°C temperature coef tracking. Ideal for surface mount applications requiring precise resistance values in compact designs.
4610X-101-470LF
The Bourns 4610X-101-470LF resistor network features a resistance of 47 ohm, rated power dissipation of 1.25 W, and operating voltage of 100 V. It is ideal for applications requiring precise resistance values in electronic circuits with a temperature range from -55 to 125 °C.
4816P-1-101LF
Bourns 4816P-1-101LF is a resistor network with 100 ohm resistance, 16 terminals, and 1.28 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 50 V. Features include isolated network type, metal glaze/thick film technology, and gull wing terminal shape.
Y1685V0001TT9R
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 150 Cel; Tolerance: .01 %;
RKLB4S103G
Koa Speer Electronics
RKLB4S103G by Koa Speer Electronics is a 10000 ohm resistor array with 8 terminals, 2% tolerance, and 0.125 W power dissipation. It features METAL GLAZE/THICK FILM tech, low profile construction, and operates b/w -55 to 125 °C. Ideal for applications requiring precise resistance values in compact spaces.
4606X-AP1-203LF
Bourns 4606X-AP1-203LF resistor network features 5 elements with 20000 ohm resistance each. It has a power dissipation of 0.2 W and operates at temperatures from -55 to 125 °C. Ideal for through-hole mounting in applications requiring high precision and reliability.
RM3216B103/203PBVW10
RM3216B103/203PBVW10 by Thin Film Technology is a 2-function resistor array with 10000 ohm and 20000 ohm resistances. It has 0.063 W power dissipation, 0.1% tolerance, and 5 ppm/°C temperature coef tracking. Ideal for applications requiring isolated network type in surface mounting.
RM2012B-103/203-PBVW10
Susumu
The Susumu RM2012B-103/203-PBVW10 is a thin film resistor array with 2 functions, 10000 ohm and 20000 ohm resistances. It has a tolerance of 0.1%, operates b/w -55 to 155 °C, and features temperature coefficient tracking of 5 ppm/°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
MNR04M0APJ390
ROHM
ROHM's MNR04M0APJ390 resistor network features 4 functions with 39 ohm resistance, 0.063 W power dissipation, and 70°C rated temperature. Ideal for applications requiring a surface mount package with isolated network type and 25V operating voltage.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved