Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 220 ohm; Rated Power Dissipation (P): 1.12 W; Maximum Operating Temperature: 125 Cel; Tolerance: 2 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Resistor Networks & Arrays 4814P-2-221LF attributes and parameters. Explore more Resistor Networks & Arrays devices from Bourns
Construction:
Element Power Dissipation:
First Element Resistance:
JESD-609 Code:
Spacing (Lead):
Mounting Type:
Network Type:
No. of Elements:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Resistor Type:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Temperature Coef Tracking:
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
4814P-2-221LF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.20
SB
8533.21.00.25
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
CRCW06031K00FKEAHP
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
4605X-101-473LF
Bourns
Bourns 4605X-101-473LF resistor network features 4 elements with 47000 ohm resistance, 2% tolerance, and 0.63 W power dissipation. Ideal for applications requiring precise resistance values in a compact SIP package with through-hole mounting.
MDP160310K0GE04
Vishay Intertechnology's MDP160310K0GE04 resistor network features 8 functions with 10000 ohm resistance, 2% tolerance, and 0.25 W power dissipation. Ideal for applications requiring precise resistance values in a compact DIP package with through-hole mounting.
LT5400BCMS8E-4#PBF
Analog Devices
LT5400BCMS8E-4#PBF by Analog Devices is a 4-function isolated resistor network with 0.8W power dissipation. Featuring 1 ppm/°C temperature coef tracking, it operates b/w -40 to 85 °C. Ideal for precision applications requiring high accuracy and stability in a compact surface-mount package.
YC164-JR-073K3L
Yageo
Yageo's YC164-JR-073K3L resistor network features 4 functions with 3300 ohm resistance, rated for -55 to 155 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 5% tolerance.
741C083561JP
Cts
741C083561JP by Cts is a resistor network with 4 functions, resistance of 560 ohm, and rated power dissipation of 0.252 W. It features metal glaze/thick film technology, surface mounting type, and operates at temperatures from -55 to 125 °C. Ideal for automotive electronics due to AEC-Q200 reference standard compliance.
EXB38V221JV
Panasonic
Panasonic EXB38V221JV is a 220 ohm resistor array with 8 terminals, 0.063 W power dissipation, and 5% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating voltage of 50 V. METAL GLAZE/THICK FILM technology ensures reliability in temperatures ranging from -55 to 125 °C.
LT5400BIMS8E-1#TRPBF
ARRAY/NETWORK RESISTOR; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -40 Cel;
GUS-SS8BLF-03-1871-D
Tt Electronics Plc
GUS-SS8BLF-03-1871-D by Tt Electronics Plc is a miniature resistor network with 15 elements, each rated at 1870 ohm resistance. It features TANTALUM NITRIDE/NICKEL CHROME technology, 70 to 125 °C operating temperature range, and 0.05 W power dissipation. Ideal for applications requiring precise resistance values in compact SMT packages.
CAT16-103J4LFZ1
CAT16-103J4LFZ1 by Bourns is a 4-function resistor array with 10000 ohm resistance, 5% tolerance, and 0.062 W power dissipation. Ideal for surface mount applications in electronics requiring isolated network type with operating voltage up to 50 V.
4610X-102-202LF
Bourns 4610X-102-202LF resistor network has 10 terminals with 2000 ohm resistance, rated for 100V and dissipates 0.3W power. Ideal for applications requiring isolated networks in through-hole mounting, operating b/w -55 to 125 °C with a tolerance of 2%.
CNS471A6
Vishay Intertechnology's CNS471A6 resistor network features 6 elements with 10000000 ohm resistance, 0.1 W power dissipation, and 2.5 ppm/°C temperature coef tracking. Ideal for applications requiring precise voltage division in circuits with a max operating temperature of 70 °C and through-hole mounting style.
CN1E4TTD103J
Koa Speer Electronics
CN1E4TTD103J by Koa Speer Electronics is a 4-function resistor network with 10000 ohm resistance, 5% tolerance, and 0.063 W power dissipation. It is designed for surface mount applications in electronic circuits, offering a temperature range of -55 to 125 °C and operating voltage of 25 V.
RAVF104DJT220R
Stackpole Electronics
RAVF104DJT220R by Stackpole Electronics is a 4-function resistor network with 220 ohm resistance, 0.063 W power dissipation, and 70-150 °C operating temperature range. Ideal for AEC-Q200 compliant applications requiring SMT mounting and isolated network type.
4816P-T01-333
Bourns 4816P-T01-333 resistor network has 8 functions with 33000 ohm resistance, rated for -55 to 125 °C. It features a metal glaze/thick film technology in a chip construction with gull wing terminals. Ideal for surface mount applications requiring isolated networks with 1.28 W power dissipation at 50 V operating voltage.
752241222GPTR7
752241222GPTR7 by Cts is a Resistor Network with 22 elements, each having a resistance of 2200 ohm. It features a power dissipation of 2W and operates b/w -55 to 125 °C. This SMT package is ideal for applications requiring precise resistance values in compact electronic devices.
YC124-FR-0710KL
YC124-FR-0710KL by Yageo is a 4-function resistor array with 10000 ohm resistance, 1% tolerance, and operating voltage of 25V. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and temperature range from -55°C to 155°C.
CNZ1E4KTTD
CNZ1E4KTTD by Koa Speer Electronics is a resistor network with 4 functions, 0 ohm resistance, and METAL GLAZE/THICK FILM technology. It is used in jumper networks for SMT applications, with a temperature range of -55 to 155 °C. Ideal for compact designs requiring precise resistance values.
Y0094V0004FQ9L
Vishay Intertechnology Y0094V0004FQ9L is a 1000 ohm resistor array with 1% tolerance, suitable for divider networks. Featuring metal foil technology, it operates at -55 to 125 °C with a power dissipation of 0.2 W. With SIP package style and 3 terminals spaced at 2.54 mm, it is ideal for various electronic applications.
4605X-101-203LF
Bourns 4605X-101-203LF resistor network features 4 elements with 20000 ohm resistance, rated at 0.2 W power dissipation. With a temperature coefficient of 50 ppm/°C, it is ideal for applications requiring precise resistance values in a compact SIP package. The through-hole mounting and high operating voltage of 100 V make it suitable for various electronic circuits.
MPMT10012002AT1
Vishay Intertechnology's MPMT10012002AT1 is a thin film resistor network with 2 elements, offering 0.1W power dissipation and 70°C rated temperature. Ideal for divider applications, it has a tracking coefficient of 2 ppm/°C and operates b/w -55°C to 150°C. Suitable for surface mounting, this SOT-23 package measures 3.05mm x 1.4mm x 1.02mm in dimensions.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved