Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ARRAY/NETWORK RESISTOR; Resistance: 10000 ohm; Rated Power Dissipation (P): .2 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %; Temperature Coef (ppm/Cel): 100;
Median Price
$0.850
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.290
1k+ parts
$0.189
10k+ parts
$0.160
Bristol Electronics
-
$0.312
$0.154
$0.134
Inventory MP
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Perfect Parts
Resistor Networks & Arrays 4605X-101-103FLF attributes and parameters. Explore more Resistor Networks & Arrays devices from Bourns
Construction:
JESD-609 Code:
Length (Lead):
Spacing (Lead):
Network Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Size Code:
Sub-Category:
Temperature Coef (ppm/Cel):
Terminal Finish:
Tolerance:
Operating Voltage:
4605X-101-103FLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Zetex Plc
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Diotec Semiconductor Ag
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Won-top Electronics
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
4610X-102-152LF
Bourns
4610X-102-152LF by Bourns is a 5-function resistor network with 1500 ohm resistance, 2% tolerance, and 1.25 W power dissipation. Ideal for through-hole mounting applications requiring isolated networks with a temperature coefficient of 50 ppm/°C.
4816P-T01-331LF
Bourns 4816P-T01-331LF is a resistor network with 8 functions, isolated type, and resistance of 330 ohm. It has a power dissipation of 0.16 W, operating voltage of 50 V, and temperature coefficient tracking of 50 ppm/°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
4605X-101-473LF
Bourns 4605X-101-473LF resistor network features 4 elements with 47000 ohm resistance, 2% tolerance, and 0.63 W power dissipation. Ideal for applications requiring precise resistance values in a compact SIP package with through-hole mounting.
4310R-101-103LF
Bourns 4310R-101-103LF is a resistor network with 9 elements, each at 10000 ohm resistance. It has a power dissipation of 0.2 W and tolerance of 2%. With a max operating temperature of 125 °C, it's ideal for applications requiring precise resistance values in electronic circuits.
4116R-1-203
Bourns 4116R-1-203 resistor network features 8 functions with 20000 ohm resistance, 2.54 mm lead spacing, and 0.25 W power dissipation. Ideal for applications requiring isolated networks in a DIP package with through-hole mounting, operating at temperatures from -55 to 125 °C.
4308R-101-202LF
Bourns 4308R-101-202LF resistor network features 7 elements with 2000 ohm resistance, rated at 0.2 W power dissipation. Suitable for applications requiring a temperature coefficient of 50 ppm/°C, it operates b/w -55 to 125 °C and has a tolerance of 2%. Ideal for through-hole mounting in various electronic circuits.
GUS-QSCBLF-012701-JG
Tt Electronics Plc
GUS-QSCBLF-012701-JG by Tt Electronics Plc is a miniature resistor network with 2700 ohm resistance, 24 terminals, and 5% tolerance. It uses TANTALUM NITRIDE/NICKEL CHROME tech for applications requiring a rated power dissipation of 0.05 W in temperatures ranging from -55 to 125 °C.
SIL09E103J
TE Connectivity
TE Connectivity's SIL09E103J is a thick film resistor network with 8 elements, rated at 70°C to 125°C. With a resistance of 10k ohm and tolerance of 5%, it is ideal for through-hole mounting applications in various electronic circuits requiring precise voltage regulation.
EXB38V471JV
Panasonic
Panasonic EXB38V471JV is a 470 ohm resistor array with 4 functions, 0.063 W power dissipation, and 5% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating voltage of 50 V. METAL GLAZE/THICK FILM technology ensures reliability in temperatures ranging from -55°C to 125°C.
742C083333JP
Cts
742C083333JP by Cts is a resistor network with a power dissipation of 0.063 W and a resistance of 33000 ohm. It is commonly used in surface mount applications for its compact size (3.2mm x 1.6mm) and high operating temperature range (-55 to 125 °C).
BCN164ABI1823F7
BCN164ABI1823F7 by Tt Electronics Plc is a SMT resistor array with 4 functions, 182000 ohm resistance, and 0.063 W power dissipation. Ideal for applications requiring isolated network types in compact electronic devices due to its small package size and surface mounting type.
4609M-101-203LF
Bourns 4609M-101-203LF is a resistor network with 8 elements, each having 20000 ohm resistance. It operates at temperatures from -55 to 125 °C and has a power dissipation of 1.35 W. Ideal for applications requiring precise resistance values in compact through-hole mounting setups.
M8340105K1003JCDSL
Vishay Intertechnology
Vishay Intertechnology's M8340105K1003JCDSL resistor network features 100000 ohm resistance, 2.54 mm lead spacing, and -55 to 125 °C operating temperature range. Ideal for military applications due to MIL-PRF-83401 standard compliance and 50 V operating voltage capacity.
YC164-FR-0722KL
Yageo
YC164-FR-0722KL by Yageo is a 4-function resistor array with 22000 ohm resistance, 1% tolerance, and 50V operating voltage. Ideal for AEC-Q200 compliant applications requiring SMT mounting in automotive electronics due to its -55 to 155 °C temperature range and compact SMT package of 3.2mm x 1.6mm x 0.6mm.
Y1485V0001AT9R
Vishay Precision Group
Vishay Precision Group's Y1485V0001AT9R is a resistor network with 2 elements, each having a resistance of 10000 ohm. It features a power dissipation of 0.05 W and operates within a temperature range of -55 to 125 °C. Ideal for precision applications requiring low tolerance and high temperature stability in surface mount configurations.
ORNTA2001AT1
Vishay Intertechnology's ORNTA2001AT1 is a 4-function resistor network with 2000 ohm resistance, 0.1% tolerance, and 100V operating voltage. Ideal for surface mount applications in electronics, it features thin film technology, 5 ppm/°C temperature coef tracking, and a max operating temperature of 150 °C.
CAT10-102J4LF
CAT10-102J4LF by Bourns is a 4-function resistor network with resistance of 1000 ohm, rated at 70 to 125 °C. Ideal for surface mount applications, it has a power dissipation of 0.0625 W and operates at 25 V, making it suitable for various electronic circuits requiring precise resistance values.
Y1685V0004BT9R
Vishay Intertechnology's Y1685V0004BT9R is a METAL FOIL resistor array with 1000 ohm resistance, 0.1% tolerance, and operating voltage of 22 V. Ideal for divider networks in SMT applications, it offers a temperature coefficient of 0.2 ppm/°C and operates b/w -55 to 150 °C temperatures.
YC164-JR-074K7L
YC164-JR-074K7L by Yageo is a 4-function resistor array with resistance of 4700 ohm, operating voltage of 50V, and tolerance of 5%. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and temperature range from -55°C to 155°C.
LT5400AIMS8E-3#PBF
Linear Technology
ARRAY/NETWORK RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Maximum Operating Temperature: 85 Cel; Tolerance: 7.5 %; Height (Package): .86 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved