Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bourns 3361S-1-501GLF is a linear trimmer resistor with 500 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
Median Price
$0.758
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$0.255
100+ parts
$0.243
1k+ parts
$0.239
10k+ parts
-
Master Electronics
$0.660
$0.578
$0.551
Mouser Electronics
$1.330
$0.948
$0.787
$0.692
Newark
$1.390
$1.010
$0.845
$0.766
DigiKey
$1.420
$0.982
$0.912
Element14
$1.550
$1.240
$1.120
TTI
$0.700
$0.647
Farnell
$0.729
Verical
Chip1Stop
$0.621
IBS Electronics
$1.686
$1.485
$1.403
Bristol Electronics
$1.875
$0.694
$0.600
VNN
Electro Sonic
$0.821
$0.721
Nova Conductors
Connect4Technologies Inc.
R&J Components
Advanced Electronics
$0.038
$0.035
$0.031
QUARKTWIN TECHNOLOGY LTD
Argo Parts USA
Perfect Parts
Aranea Global
Continental Prestige Electronics
$0.727
$0.485
Metaverse IC Inc.
Suitable for a wide range of temperature environments, making it versatile and reliable in different applications.
Easy to operate and adjust horizontally, providing convenience for the user.
Cermet technology provides high stability, low noise, and excellent temperature stability for precise and reliable resistance adjustment.
Rectangular package shape allows for compact and efficient installation in various electronic circuits.
Linear resistance change allows for precise and predictable adjustment, ideal for applications requiring accurate resistor settings.
Rectangular construction enhances durability and ease of installation in electronic devices.
With a resistance value of 500 ohms, this variable resistor can provide a wide range of resistance options for different circuit requirements.
Having 3 terminals allows for flexibility in circuit connections and adjustments.
Surface mount technology (SMT) package style enables easy and efficient mounting on PCBs, saving space and improving production efficiency.
L bend terminal shape ensures secure and stable connection in the circuit, reducing the risk of connection issues.
High maximum operating temperature ensures reliability and stability in demanding environmental conditions.
Low minimum operating temperature allows for effective performance even in cold environments.
Low temperature coefficient ensures minimal resistance drift over a wide temperature range, maintaining accuracy in variable resistor settings.
Matte tin terminal finish provides corrosion resistance and good solderability for reliable and long-lasting connections.
Compact height allows for space-efficient installation in electronic devices.
Trimmer resistor type enables precise adjustment of resistance for fine-tuning circuit performance.
Screw-type actuator offers easy and accurate resistance adjustment, making it user-friendly.
Suitable for applications requiring higher voltage handling capabilities, ensuring reliable performance in various circuits.
With a tolerance of 10%, this variable resistor provides consistent and predictable resistance values within the specified range.
Compact length allows for efficient and space-saving installation in electronic assemblies.
Surface mounting type facilitates easy and convenient installation on PCBs, reducing assembly time and labor costs.
With a power dissipation rating of 0.5W, this variable resistor can handle moderate power levels, suitable for various applications.
Narrow width allows for compact and efficient placement in electronic circuits.
With a rotation angle of 240°, this variable resistor offers a wide range of adjustment options for precise resistance tuning.
Variable Resistors 3361S-1-501GLF attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3361S-1-501GLF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
PCN Design/Specification - 3361 Model Epoxy May/2007 3361S Model Jun/2013
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Surge Components
Eic Semiconductor
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Plessey Semiconductors Discrete Components Div
Other Transistors;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
TC33B-1-503E
Bourns
Bourns TC33B-1-503E is a linear trimmer pot with 50000 ohm resistance, 25% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments within -40 to 100 °C temperature range.
P0915N-FC20BR50K
Tt Electronics Plc
P0915N-FC20BR50K by Tt Electronics Plc is a linear conductive plastic potentiometer with 50000 ohm resistance and 20% tolerance. It features a shaft actuator, 300° rotation angle, and is designed for PCB mount applications. Operating temperature ranges from -10 to 70 °C, making it suitable for various electronic devices requiring precise resistance control.
3296W-1-202
Bourns 3296W-1-202 is a CERMET multi-turn trimmer resistor with 2000 ohm resistance, 25 turns, and linear resistance law. It has a max operating temperature of 125 °C and is suitable for applications requiring precise voltage adjustments in electronic circuits.
SM-42TW103
Nidec Copal Electronics
The Nidec Copal Electronics SM-42TW103 is a 10000 ohm linear trimmer resistor with 11 turns and CERMET technology. It operates b/w -65 to 150 °C, suitable for applications requiring precise resistance adjustments in compact SMT packages. With a tolerance of 10%, it offers a rated power dissipation of 0.25 W at an operating voltage of 50 V.
67WR500LF
67WR500LF by Tt Electronics Plc is a CERMET variable resistor with 20 turns, linear resistance law, and 10% tolerance. It has a rated power dissipation of 0.5W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications requiring precise resistance adjustments in electronic circuits.
P272-DS32R5K
P272-DS32R5K by Tt Electronics Plc is a 5000 ohm linear potentiometer with 6 terminals and 10% tolerance. It operates b/w -55°C to 120°C, suitable for panel mount applications. Featuring conductive plastic technology, it has a rated power dissipation of 2W and ganging number of 2, making it ideal for precise resistance control in various electronic devices.
72PR5KLFTB
72PR5KLFTB by Tt Electronics Plc is a TRIMMER resistor with CERMET technology. It has a linear Law Of Resistance and operates b/w -55 to 125 °C. With a rated power dissipation of 0.5 W, it is ideal for PCB Mount applications requiring precise resistance adjustments up to 200 V.
14910A0BHSX10103KA
Vishay Intertechnology
Vishay Intertechnology's 14910A0BHSX10103KA is a linear cermet trimmer pot with 10000 ohm resistance, 3 terminals, and 10% tolerance. It is used in PCB mounting applications for adjusting and controlling electrical circuits with a rated power dissipation of 1W. The potentiometer has an operating temperature range from -40°C to 125°C, making it suitable for various electronic devices.
3306W-1-503
Bourns 3306W-1-503 is a CERMET trimmer resistor with 50000 ohm resistance, 25% tolerance, and 0.2 W power dissipation. It is used in PCB mounting applications for temperature-sensitive circuits requiring precise resistance adjustments up to 215° rotation angle.
PV32P502A01B00
Murata Manufacturing
Murata Manufacturing's PV32P502A01B00 is a 5000 ohm linear trimmer pot with 3 terminals. It has a rated power dissipation of 0.5W and operates at temperatures from -55 to 125 °C. Ideal for PCB mounting, this variable resistor is commonly used in applications requiring precise resistance adjustments.
3540S-1-103L
Bourns 3540S-1-103L is a 10-turn, 10000 ohm linear wire wound potentiometer with 5% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 125°C. Ideal for panel mount applications requiring precise resistance adjustments in various electronic circuits.
8-1879321-8
TE Connectivity
POTENTIOMETER; Orientation (Actuator): HORIZONTAL; Dimensions: 13.75mm x 11.7mm x 5.1mm;
3382G-1-103G
Bourns 3382G-1-103G is a linear potentiometer with 10000 ohm resistance, 30% tolerance, and 0.05 W power dissipation. It has a vertical actuator orientation and gull wing terminal shape. Ideal for applications requiring precise voltage control in electronic circuits.
TC33X-2-103E
The Bourns TC33X-2-103E is a linear variable resistor with 1 turn and a resistance of 10k ohm. It has a temperature coefficient of 250 ppm/°C and can operate at temperatures ranging from -40 to 100 °C. This surface mount trimmer resistor is commonly used in electronic circuits for voltage control and signal adjustment.
72XWR2KLFTB
72XWR2KLFTB by Tt Electronics Plc is a CERMET variable resistor with linear resistance law, suitable for PCB mounting. With a max operating temperature of 125°C and rated power dissipation of 0.5W, it has an operating voltage of 200V. Ideal for applications requiring precise resistance adjustments in electronic circuits.
23ESA103MMF50NF
TE Connectivity's 23ESA103MMF50NF is a linear carbon film potentiometer with 10000 ohm resistance, 20% tolerance, and 0.4 W power dissipation. It has a circular package shape, horizontal actuator orientation, and through hole mount for applications in electronic circuits requiring precise resistance adjustments.
3296W-1-103A
Bourns 3296W-1-103A is a CERMET multi-turn trimmer resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a tolerance of 10%. Ideal for applications requiring precise voltage adjustments in circuits with up to 300 V operating voltage.
PE30L0FR103MAB
Vishay Intertechnology's PE30L0FR103MAB is a 10000 ohm linear potentiometer with 20% tolerance and 3W power dissipation. It operates b/w -55 to 125 °C, suitable for panel mount applications requiring precise resistance adjustments in a compact circular package. The shaft actuator allows for a rotation angle of 270°, making it ideal for various electronic devices.
89PR10KLF
89PR10KLF by Tt Electronics Plc is a CERMET variable resistor with 10000 ohm resistance, rated for temperatures b/w -55 to 125 °C. It features a linear law of resistance and is ideal for PCB mount applications due to its rectangular package shape and through-hole mounting type.
3310Y-001-103L
Bourns 3310Y-001-103L is a linear potentiometer with resistance of 10k ohm, rated power of 0.25W, and temperature coefficient of 1000 ppm/°C. Ideal for PCB mounting applications in various electronic devices due to its conductive plastic technology and vertical actuator orientation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3361P-1-103GLF
Bourns 3361P-1-103GLF is a linear trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It operates b/w -55 to 125 °C and has a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in electronic circuits requiring precise resistance adjustments.
3361P-1-503GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 50000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361P-1-502GLF
Bourns 3361P-1-502GLF is a CERMET trimmer resistor with 5000 ohm resistance, linear law, and 10% tolerance. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for applications requiring precise resistance adjustments in compact SMT designs.
3361S-1-502GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361S-1-503GLF
3361P-1-502G
3361S-1-502G
3361P-1-203GLF
Bourns 3361P-1-203GLF is a CERMET variable resistor with 20000 ohm resistance, linear law, and 10% tolerance. Ideal for surface mount applications in electronic circuits where precise voltage adjustments are required. Operating temperature range from -55 to 125 °C with a power dissipation of 0.5 W.
3361S-1-105GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 1000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361S-1-203GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361P-1-501GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361S-1-103GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361P-1-202GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361S-1-101GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361P-1-104GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361P-1-253GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361S-1-501G
3361S-1-503G
3361S-1-504GLF
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
3361S-1-504G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved