Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
Median Price
$3.483
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$2.390
1k+ parts
$2.090
10k+ parts
$1.960
Verical
$4.576
$4.069
TEDSS.com
$1.890
$1.390
Component Electronics Inc.
$3.080
$2.310
$2.000
Electronic Expediters
DF Sales Co.
R&J Components
Mil-Aero Solutions, Inc.
ComSIT Distribution GmbH
Elcom Components
LIBRA Elektronik GmbH
Standard Data Resources
Bristol Electronics
Variable Resistors 3299Y-1-204 attributes and parameters. Explore more Variable Resistors devices from Bourns
Orientation (Actuator):
Type (Actuator):
Construction:
JESD-609 Code:
Diameter (Lead):
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
3299Y-1-204 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Bourns, Inc. is an American electronics company that develops, manufactures and supplies electronic components for a variety of industries including automotive, industrial, instrumentation, medical electronics, consumer equipment and portable electronics. Established in Altadena, California in 1947 by Marlan and Rosemary Bourns, graduates of the University of Michigan, the company was founded to develop and sell electronic components and sensors to the aerospace industry. Bourns has 15 manufacturing facilities around the world and has continued growing through the development of new products and technologies as well as through acquisitions. The company has approximately 9000 employees worldwide.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sensitron Semiconductor
23ESA474MMF50NF
TE Connectivity
TE Connectivity's 23ESA474MMF50NF is a linear carbon film potentiometer with 470k ohm resistance, suitable for through-hole mounting. Its circular package measures 25.2mm x 20.4mm and features a horizontal actuator shaft. This variable resistor with flat terminals is ideal for precise resistance adjustments in electronic circuits.
PT-6KV502A2020
Piher Sensors And Controls Sa
PT-6KV502A2020 by Piher Sensors is a 5000 ohm linear carbon film trimmer resistor with 3 terminals. It has a tolerance of 20% and rated power dissipation of 0.1 W. Ideal for applications requiring precise resistance adjustments in circuits with temperatures ranging from -25 to 70 °C.
3386H-1-203LF
Bourns
The Bourns 3386H-1-203LF is a linear variable resistor with a resistance of 20000 ohm and a tolerance of 10%. It is commonly used in PCB mount applications for adjusting or trimming circuit parameters.
3590S-1-102L
Bourns 3590S-1-102L is a 1000 ohm potentiometer with linear resistance law, 10 turns, and 5% tolerance. It has a rated power dissipation of 2W and operates b/w -40 to 125 °C. Ideal for panel mount applications requiring precise resistance adjustments.
PTA6044-2015DPA103
PTA6044-2015DPA103 by Bourns is a 10000 ohm POTENTIOMETER with VERTICAL orientation and CARBON technology. It has 6 terminals, rated for 150V operating voltage, and PCB Mount package style. Ideal for audio applications due to its AUDIO Law Of Resistance, this RECTANGULAR variable resistor offers a tolerance of 20% and operates b/w -10 to 50 °C temperatures.
3296W-1-103
Bourns 3296W-1-103 is a CERMET variable resistor with 10000 ohm resistance, 25 turns, and linear resistance law. It operates b/w -55 to 125 °C and has a power dissipation of 0.5 W. Ideal for applications requiring precise voltage adjustments in electronic circuits.
RKS10RE
Ohmite Manufacturing
Ohmite Manufacturing's RKS10RE is a 10 ohm wire wound potentiometer with linear resistance law, 3 terminals, and 10% tolerance. It features a panel mount circular package with a 44.45mm length and 79.38mm diameter, suitable for applications requiring precise resistance adjustment in horizontal orientation. With a rated power dissipation of 100W and an actuator shaft for easy adjustment, it is ideal for use in various electronic circuits.
TC73W-1-102E
The Bourns TC73W-1-102E is a SMT carbon potentiometer with 1000 ohm resistance, 30% tolerance, and 50V operating voltage. It is ideal for applications requiring precise resistance adjustments in compact spaces. With a temperature range of -25 to 85 °C, it offers reliable performance in various electronic devices.
P161G201QSA30D105
Tt Electronics Plc
P161G201QSA30D105 by Tt Electronics Plc is a 1M ohm potentiometer with 12 terminals, rated at 0.1W power dissipation. Featuring conductive plastic technology and an audio resistance law, it is designed for PCB mounting applications requiring precise resistance adjustments in a temperature range of -10 to 70°C.
3250L-1-103M
The Bourns 3250L-1-103M is a 10000 ohm linear wire wound trimmer resistor with 25 turns and 5% tolerance. It has a rated power dissipation of 1W, operates b/w -65 to 150 °C, and features a screw actuator for precise adjustments. Ideal for applications requiring accurate resistance tuning in electronic circuits.
T73YU103KT20
Vishay Intertechnology
Vishay Intertechnology's T73YU103KT20 is a 10000 ohm linear trimmer resistor with 3 terminals. It has a rated power dissipation of 0.5W and operates b/w -55 to 125 °C. Ideal for PCB mounting, it features a screw actuator and is commonly used in applications requiring precise resistance adjustments.
T7YB103MT20
Vishay Intertechnology's T7YB103MT20 is a CERMET variable resistor with 10000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. Ideal for PCB mounting applications, it operates b/w -55 to 125 °C with a linear law of resistance. The screw-type actuator allows for precise adjustments in various electronic circuits.
TC73W-1-203E
Bourns TC73W-1-203E is a SMT POTENTIOMETER with 20000 ohm resistance, 30% tolerance, and 50V operating voltage. Ideal for applications requiring precise resistance adjustments in compact spaces due to its small package size (3.6mm x 3.1mm x 1.8mm) and wide 260° angle of rotation capability.
3299X-1-103LF
Bourns 3299X-1-103LF is a CERMET trimmer pot with 10000 ohm resistance, 25 turns, and linear resistance law. Ideal for PCB mounting applications, it has a max operating temperature of 125 °C and operates at an angle of rotation up to 9000°.
TW1250KA
TE Connectivity's TW1250KA is a 1W POTENTIOMETER with 10% Tolerance and 100 ppm/°C Temperature Coef. Its compact size of 23.5mm x 22.6mm makes it ideal for HORIZONTAL orientation applications in various electronic circuits.
PT10MV10-104A2020-S
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 100000 ohm; Rated Power Dissipation (P): .15 W; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %;
72XWR2KLFTB
72XWR2KLFTB by Tt Electronics Plc is a CERMET variable resistor with linear resistance law, suitable for PCB mounting. With a max operating temperature of 125°C and rated power dissipation of 0.5W, it has an operating voltage of 200V. Ideal for applications requiring precise resistance adjustments in electronic circuits.
3266X-1-203LF
Bourns 3266X-1-203LF is a CERMET trimmer resistor with 12 turns, 20000 ohm resistance, and linear law. Ideal for applications requiring precise resistance adjustments in circuits with operating voltage up to 300V. Features multi-turn construction, -55 to 150 °C temperature range, and matte tin terminal finish.
RK09L1140A66
Alps Electric
POTENTIOMETER; Resistance: 10000 ohm; Maximum Operating Temperature: 70 Cel; Tolerance: 20 %; Size Code: 4845; Minimum Operating Temperature: -10 Cel;
RJS3K5E
The Ohmite Manufacturing RJS3K5E is a 3500 ohm linear wire wound potentiometer with 10% tolerance. Featuring a shaft actuator and panel mount package style, it has a rated power dissipation of 50W. Ideal for applications requiring precise resistance adjustment in horizontal orientation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved