Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FL10/6 by Block Transformatoren-elektronik is a 10 VA power transformer with dual 115V primary rating. It has two secondary windings producing 6V output each, suitable for applications requiring a max operating temperature of 40°C. Approved by CSA, CUL, EAC, UL, and VDE, it is ideal for through-hole mounting in various power and mains transformer setups.
Median Price
$19.530
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
< 1k
Distrelec
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Vyrian
ACDS - Activité Composants Distribution Service
AZTECH Wire
$16.413
Having multiple approvals ensures that this power transformer meets different safety and quality standards, making it a reliable choice for various applications.
The dual winding design allows for versatility in voltage outputs, making it suitable for a range of electronic devices and equipment.
With a power rating of 10 VA, this transformer can efficiently handle power conversion while maintaining stability and reliability.
The transformer's ability to operate at up to 40°C ensures that it can handle moderate heat without compromising performance or safety.
A consistent output voltage of 6V ensures that the connected devices receive a stable power supply, reducing the risk of damage or malfunction.
Having another output voltage of 6V allows for flexibility in connecting multiple devices with different power requirements.
Support for both 50 Hz and 60 Hz frequencies makes this transformer compatible with various regional power systems, increasing its versatility.
The dual primary winding configuration with a voltage rating of 115V each ensures compatibility with different power sources, offering more flexibility in applications.
The compact height of the transformer allows for easy integration into space-constrained electronic devices or circuits.
The moderate width of the transformer enables it to fit comfortably in standard mounting setups or enclosures, enhancing installation convenience.
The nominal input voltage of 115V suits most common power sources, ensuring compatibility with a wide range of electrical systems.
Being a power transformer, this product is specifically designed for efficient power conversion and distribution, making it a reliable choice for industrial and commercial applications.
The through-hole mounting feature simplifies installation and ensures secure placement of the transformer on a circuit board or mounting surface.
The moderate length of the transformer accommodates the internal components and winding configurations while remaining suitable for various installation setups.
Power & Mains Transformers FL10/6 attributes and parameters. Explore more Power & Mains Transformers devices from Block Transformatoren-elektronik
Approvals (V):
Center Tap Feature-1:
Center Tap Feature-2:
Height:
Nominal Input Voltage (V):
Length:
Mounting Feature:
No. of Winding (Secondary):
Nominal Operating Frequency:
Maximum Operating Temperature:
Output Voltage-1:
Output Voltage-2:
Rating (Primary):
Transformer Type:
Volt-Ampere Rating (VA):
Width:
FL10/6 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.31.40.35
SB
BLOCK is at the forefront of manufacturers of transformers, power supplies, circuit breakers, chokes and EMC filters and sets standards worldwide. Whether mechanical engineering, drive technology, railway technology or regenerative energies - our products and solutions guarantee optimal voltage and network quality in all areas of business and industry. BLOCK has been a strong partner to industry and trade worldwide for decades when it comes to transformers , power supplies, circuit breakers, chokes and EMC filters . Customers appreciate our reliability, quality and service. And to keep it that way, BLOCK consistently relies on fast and reliable development, production and advice from a single source. We develop the perfect voltage for our customers' products. Together with the in-house development center, BLOCK offers not only a large selection of products from stock, but also rapid customization and new product development.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Sensitron Semiconductor
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Eic Semiconductor
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
1124
Amecon
TOROIDAL POWER TRANSFORMER; Output Current-1: 4.17 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 75 VA; No. of Winding (Secondary): 1;
182F30
Hammond Manufacturing
The Hammond Manufacturing 182F30 is a Toroidal Power Transformer with 225 VA rating, 4000 V isolation voltage, and 7.5 A output current. Ideal for chassis mounting applications, it offers dual primary ratings of 117/234 V and dual secondary windings at 30 V each.
BVEI3821195
Hahn And Kg
BVEI3821195 by Hahn And Kg is a Power Transformer with 4.5VA rating, 18V output voltage, and 0.25A output current. It is ideal for applications requiring a single 230V primary rating, CSA/UL approvals, and through-hole mounting method.
VB1,2/1/6
Block Transformatoren-elektronik
VB1,2/1/6 by Block Transformatoren-elektronik is a 1.2 VA power transformer with output voltage of 6V and operating temperature up to 70°C. It is approved by CSA, EAC, IEC, UL, VDE for applications requiring single-phase 230V input at frequencies of 50-60 Hz. Ideal for through-hole mounting in compact spaces due to its dimensions of 23.8mm x 27.3mm x 32.3mm.
1251
TOROIDAL POWER TRANSFORMER; Output Current-1: 11.11 A; Volt-Ampere Rating (VA): 400 VA; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ;
4782-01
Api Technologies
Api Technologies' 4782-01 Power Transformer has a 450 VA rating with output voltage of 5V and current of 10A. Ideal for chassis mounting applications, it operates at a frequency of 60Hz and is designed for single-phase systems with a primary rating of 115V.
2244
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2244; Output Current-1: 17.78 A; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Volt-Ampere Rating (VA): 320 VA;
1315
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 1000 VA; Output Current-1: 8.7 A; No. of Winding (Secondary): 1;
2025
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2025; No. of Winding (Secondary): 1; Nominal Operating Frequency: 60 HZ; Output Current-1: .33 A; Volt-Ampere Rating (VA): 8 VA;
16-12
Signal Transformer
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 16; Width: 98.4 mm; Length: 104.8 mm; Height: 87.3 mm;
10-4
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 10; Center Tap Feature-1: YES; No. of Winding (Secondary): 2; Output Voltage-2: 5 V;
RTMI736618
Analog Devices
Analog Devices' RTMI736618 is a 5 VA power transformer with 500V isolation voltage. Operating at -55 to 105 °C, it outputs 11.8V at 400Hz frequency. Ideal for various applications requiring reliable power conversion in compact spaces.
5944
POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 160 VA; No. of Winding (Secondary): 1; Output Current-1: 2.67 A;
1290
TOROIDAL POWER TRANSFORMER; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 750 VA; No. of Winding (Secondary): 1; Output Current-1: 25 A;
2170
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2170; Output Current-1: 3.33 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 100 VA; No. of Winding (Secondary): 1;
B050MBT713XK
Micron Industries
Micron Industries' B050MBT713XK is a 50 VA power transformer with output voltage of 24 V and current rating of 0.44 A. It is UL and CSA approved, suitable for chassis mounting in applications requiring single-phase operation at 208/230/460 V.
A262A7E
Oep Walters Group Holdings
A262A7E by Oep Walters Group Holdings is a Split Bobbin Power Transformer with 2 secondary windings and an isolation voltage of 1MV. It operates at frequencies up to 300Hz, with dimensions of L27.94xB22.9xH22.2 mm, suitable for through-hole mounting applications in power systems.
DA2304-ALD
Coilcraft
Coilcraft's DA2304-ALD is a 7.2W power transformer with 2500V isolation voltage, suitable for AEC-Q200 applications. It features dual 3.3V primary rating, 17.8uH inductance, and operates at frequencies up to 150KHz. Ideal for power systems requiring compact dimensions and high reliability in harsh environments.
182L30
182L30 by Hammond Manufacturing is a Toroidal Power Transformer with 120 VA rating, 4000 V isolation voltage, and dual 117/234 primary rating. It has two secondary windings producing 30 V output voltage each at 4 A current. Ideal for chassis mounting in power applications requiring reliable and efficient power conversion.
2129
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2129; Output Current-1: 2.5 A; Volt-Ampere Rating (VA): 60 VA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FL10/12
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; CUL; EAC; UL; VDE; Nominal Operating Frequency: 50-60 HZ; Height: 22.86 mm; Maximum Operating Temperature: 40 Cel;
FL10/9
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; CUL; EAC; UL; VDE; No. of Winding (Secondary): 2; Nominal Operating Frequency: 50/60 HZ; Length: 68.072 mm;
FL10/18
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; CUL; EAC; UL; VDE; Output Voltage-1: 18 V; Center Tap Feature-2: NO; Center Tap Feature-1: NO;
FL10/24
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; CUL; EAC; UL; VDE; Output Voltage-1: 24 V; Center Tap Feature-1: NO; Nominal Operating Frequency: 50-60 HZ;
FL10/5
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; CUL; EAC; UL; VDE; No. of Winding (Secondary): 2; Output Voltage-2: 5 V; Center Tap Feature-2: NO;
FL10/15
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; CUL; EAC; UL; VDE; Output Voltage-1: 15 V; Nominal Input Voltage (V): 115; Height: 22.86 mm;
FL10/8
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; CUL; EAC; UL; VDE; Output Voltage-2: 8 V; Nominal Operating Frequency: 50/60 HZ; Maximum Operating Temperature: 40 Cel;
FL10/14014/9
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): CSA; CUL; EN; UL; VDE; Nominal Operating Frequency: 50/60 HZ; Height: 22.86 mm; Output Current-2: .14 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved