Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse's DST-2-24 is a split bobbin power transformer with dual 115/230V primary rating. It offers 2500V isolation voltage, 1.1VA VA rating, and two windings for 12V output each. Ideal for applications requiring reliable power conversion in compact spaces.
Median Price
$9.392
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$13.120
100+ parts
$10.610
1k+ parts
$9.840
10k+ parts
-
DigiKey
$13.190
$10.700
$9.615
Verical
$9.623
Chip1Stop
$9.160
Master Electronics
$8.740
Farnell
$7.300
Nova Conductors
$8.000
Component Electronics Inc.
$8.460
$6.350
$5.500
ComSIT Distribution GmbH
Vyrian
Electro Sonic
$8.850
$7.470
IBS Electronics
$12.651
$12.524
TME
$9.190
Continental Prestige Electronics
$7.840
Netroflash
$7.600
$7.440
AZTECH Wire
$17.966
Neutron USA
$39.990
Argo Parts USA
Perfect Parts
Having UL and CSA approvals ensures that the product meets high safety and quality standards, making it a reliable choice for use in various applications.
High isolation voltage helps in preventing electrical hazards by providing a high level of insulation between the primary and secondary windings, enhancing safety.
The output current rating of 0.045 A allows for efficient power delivery while ensuring the safety and longevity of the transformer.
Balanced output current ratings for both secondary windings ensure consistent power distribution and performance in the transformer.
Having two secondary windings provides flexibility in connecting the transformer to different circuits or components, making it versatile for various applications.
Compact dimensions allow for easy integration and installation in space-constrained environments, making it ideal for use in compact electronic devices.
The 1.1 VA rating indicates the power handling capacity of the transformer, ensuring efficient and reliable operation within its specified limits.
A stable output voltage of 12 V from the secondary winding ensures consistent power supply to connected devices, promoting reliable performance.
Having both secondary windings rated at 12 V ensures compatibility with a wide range of electronic devices that require a standard voltage supply.
Support for both 50 and 60 Hz operating frequencies makes the transformer suitable for use in different regions or with various power sources.
The dual voltage rating allows the transformer to be used with different input voltage levels, providing versatility and compatibility in various power systems.
The split bobbin design enhances the isolation and safety of the transformer, reducing the risk of electrical hazards and improving overall performance.
The through-hole mounting feature simplifies the installation process and provides secure attachment of the transformer to the circuit board or enclosure.
Power & Mains Transformers DST-2-24 attributes and parameters. Explore more Power & Mains Transformers devices from Bel Fuse
Approvals (V):
Center Tap Feature-1:
Center Tap Feature-2:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Winding (Secondary):
Nominal Operating Frequency:
Output Current-1:
Output Current-2:
Output Voltage-1:
Output Voltage-2:
Dimensions:
Rating (Primary):
Transformer Type:
Volt-Ampere Rating (VA):
Width:
DST-2-24 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.31.40.35
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N4148WS
Continental Device India
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Comchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Bharat Electronics
Transistor & Electronic
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
10-12
Jm Transformer
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: 10; Nominal Operating Frequency: 50/60 HZ; Height: 79.4 mm; Output Voltage-1: 5 V;
3FS-224
Tamura
The Tamura 3FS-224 is a power transformer with UL and CSA approvals. It has two secondary windings, an output current of 0.045 A, and a VA rating of 1.1 VA. Ideal for applications requiring a nominal operating frequency of 60 HZ.
ST-2-12
Signal Transformer
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: ST; Approvals (V): UL; CSA; Output Current-2: .09 A; Width: 28.6 mm;
DST-2-24
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; Width: 28.6 mm; Length: 34.9 mm;
739
Hammond Manufacturing
The Hammond Manufacturing 739 power transformer has a 1610 VA rating, output voltage of 3500 V, and is CSA approved. Ideal for applications requiring a single primary input of 115V, chassis mount installation, and a center tap feature for versatile use in various power systems.
2088
Amecon
TOROIDAL POWER TRANSFORMER; Manufacturer Series: 2088; No. of Winding (Secondary): 1; Output Current-1: 1.04 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 25 VA;
FL24/12
Block Transformatoren-elektronik
FL24/12 by Block Transformatoren-elektronik is a 24 VA power transformer with dual 115V primary rating. It has two secondary windings, each providing 12V output voltage. Approved by CSA, CUL, EAC, UL, and VDE for applications requiring reliable power conversion in compact spaces.
714
POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Approvals (V): CSA; Height: 96.4184 mm; Rating (Primary): SINGLE 115V; No. of Winding (Secondary): 1;
1142
TOROIDAL POWER TRANSFORMER; Volt-Ampere Rating (VA): 100 VA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1; Output Current-1: 8.33 A;
1325
TOROIDAL POWER TRANSFORMER; Output Current-1: 13.04 A; Volt-Ampere Rating (VA): 1500 VA; Nominal Operating Frequency: 60 HZ; No. of Winding (Secondary): 1;
VB0,5/1/24
VB0,5/1/24 by Block Transformatoren-elektronik is a 0.5 VA power transformer with output voltage of 24V. It operates at a max temperature of 70°C and has approvals from CUL, UL, VDE. Ideal for applications requiring single-phase 230V input and through-hole mounting, such as power supply units in various electronic devices.
74942300
Wuerth Elektronik & Kg
74942300 by Wurth Elektronik is a Power Transformer with 2 secondary windings, Center Tap Feature-1 & -2, and AEC-Q200 approval. It offers an Isolation Voltage of 4300V, operates b/w -40°C to 125°C, and has a Nominal Input Voltage of 1000V. Ideal for surface mount applications requiring compact dimensions (15.1mm x 14.2mm x 4.75mm).
1125
TOROIDAL POWER TRANSFORMER; No. of Winding (Secondary): 1; Output Current-1: 3.13 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 75 VA;
F20-120-C2
Triad Magnetics
Triad Magnetics' F20-120-C2 is a split bobbin power transformer with 2.5 VA rating, 10V output voltage, and 0.12A output current per winding. It offers an isolation voltage of 4.2MV and is ideal for applications requiring a compact design with through-hole mounting in electronics or industrial equipment.
DSW-420
Stancor Products
Stancor Products' DSW-420 is a UL and CSA approved power transformer with 6 VA rating, 0.3 A output current, and operates b/w -40 to 105 °C. Ideal for various applications requiring a reliable power source at 60 HZ frequency.
AVB3,2/2/9
AVB3,2/2/9 by Block Transformatoren-elektronik is a 3.2 VA power transformer with dual 115V primary rating and 9V output voltages. It has CSA, CUL, EAC, UL approvals and operates at a max temperature of 50°C. Ideal for applications requiring through-hole mounting in electronic devices.
VTX-146-030-118
Vigortronix Uk
TOROIDAL POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Output Current-1: .83 A; Dimensions: D74.0XH31.0 (mm); Rating (Primary): SINGLE 230V; Height: 31 mm;
82915
Pico Electronics
POWER TRANSFORMER; Mounting Feature: SURFACE MOUNT; Approvals (V): MIL-PRF-27; Terminal Finish: Tin/Lead (Sn/Pb); No. of Winding (Secondary): 2; Nominal Operating Frequency: 400 HZ;
45027
Myrra Sas
45027 by Myrra Sas is a Power Transformer with dual 115V primary rating and 6 VA Volt-Ampere. It features two windings, isolation voltage of 4000 V, and output currents of 0.25 A each. Ideal for applications requiring a max operating temperature of 70°C, such as power supply units or industrial equipment.
4781-01
Api Technologies
Api Technologies' 4781-01 Power Transformer has a VA rating of 450VA, outputting 5V at 8A. With dimensions of L76.2xB63.5xH66.04 mm, it is ideal for chassis mounting applications requiring a single primary input of 115V at 60Hz frequency.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DST2-24
A/d Electronics
POWER TRANSFORMER; No. of Winding (Secondary): 2; Additional Features: PCB MOUNTABLE; Output Current-1: .045 A; Nominal Operating Frequency: 60 HZ; Volt-Ampere Rating (VA): 1.1 VA;
Regal Electronics
Regal Electronics' DST2-24 is a UL & CSA approved power transformer with 2500V isolation voltage. It has dual 115V primary rating, outputs 12V at 0.045A, and dimensions of L1.375xB1.125xH1.3125 inches. Ideal for applications requiring a compact, through-hole mounted power transformer with 1.1VA volt-ampere rating.
DST-2-10
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; Volt-Ampere Rating (VA): 1.1 VA; Output Voltage-2: 5 V;
DST-2-120
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; Rating (Primary): DUAL 115V; Output Voltage-2: 60 V;
DST-2-12
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; No. of Winding (Secondary): 2; Center Tap Feature-1: NO;
DST-2-20
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; Nominal Operating Frequency: 50/60 HZ; Output Voltage-2: 10 V;
DST-2-28
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; Rating (Primary): DUAL 115V; Isolation Voltage: 2500 V;
DST-2-36
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; No. of Winding (Secondary): 2; Center Tap Feature-2: NO;
DST-2-48
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; Center Tap Feature-2: NO; Output Current-2: .023 A;
DST-2-56
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; Output Voltage-2: 28 V; Nominal Operating Frequency: 50/60 HZ;
DST2-24B45
Pulse Specialty Components
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: DST; Approvals (V): UL; CSA; Length: 28.702 mm; Output Current-2: .045 A;
Bel Fuse
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Output Voltage-1: 5 V; No. of Winding (Primary): 1; Center Tap Feature-2: NO;
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Height: 24.6 mm; Center Tap Feature-1: NO; Volt-Ampere Rating (VA): 1.1 VA;
DST-2-16
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Output Current-2: .07 A; Center Tap Feature-1: NO; Width: 28.6 mm;
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Output Voltage-1: 10 V; Output Voltage-2: 10 V; Rating (Primary): DUAL 115/230V;
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Output Voltage-2: 14 V; Height: 24.6 mm; Output Current-1: .04 A;
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Output Current-1: .03 A; Width: 28.6 mm; Isolation Voltage: 2500 V;
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; Length: 34.9 mm; Height: 24.6 mm; No. of Winding (Secondary): 2;
Pulse Electronics
SPLIT BOBBIN POWER TRANSFORMER; Mounting Feature: CHASSIS MOUNT; Manufacturer Series: DST2-24B45; Approvals (V): UL; CSA; Center Tap Feature-1: NO; Volt-Ampere Rating (VA): 1.1 VA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved