Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
Median Price
$0.480
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.590
100+ parts
$0.364
1k+ parts
$0.272
10k+ parts
$0.258
DigiKey
$0.610
$0.400
$0.273
$0.245
Master Electronics
-
$0.369
$0.306
$0.253
Verical
$0.339
Bristol Electronics
$0.563
$0.208
$0.158
Forefront Electronics and Design
$1.470
TME
$0.438
$0.274
Semtec, LLC
ACDS - Activité Composants Distribution Service
Ampacity Inc.
$0.286
Perfect Parts
Fuses 5MF1.5-R attributes and parameters. Explore more Fuses devices from Bel Fuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
5MF1.5-R Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
50NHG000B
Eaton Corporation
The Eaton Corporation 50NHG000B fuse is rated for 500V AC with a 50A current and 120,000A breaking capacity. It has a nominal joule integral of 5900J and features TAB/BLADE terminals. This electric fuse, compliant with CE, DIN, IEC, VDE standards, is commonly used for circuit protection in various applications.
7100.1016.13
Schurter Ag
7100.1016.13 fuse by Schurter Ag is a 1.25A, 250V time lag electric fuse with dimensions of 11.5x5mm and rated breaking capacity of 50A. It is suitable for circuit protection in applications requiring a nominal joule integral of 3J, such as industrial equipment and electronic devices.
ANL-250
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 32 V; Rated DC Voltage: 80 V; Rated Current: 250 A; Terminal Shape: TAB/BLADE;
C14G40
The Eaton Corporation C14G40 fuse is a 40A electric fuse with a rated AC/DC voltage of 500V. It has a body length/diameter of 14mm and height of 51mm, featuring an end cap terminal shape. With a high breaking capacity of 120kA, it is ideal for inline/holder mounting in various applications requiring reliable circuit protection.
LP-CC-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 3 A; Terminal Shape: END CAP;
0257010.PXPV
Littelfuse
Littelfuse 0257010.PXPV ATO fuse with 10A current, 32V rated voltage, and fast blow characteristic. Ideal for electric circuit protection in UL-standard applications with dimensions of 19.05mm x 5.08mm x 12.19mm and a pre-arcing rating of 115 A2/s.
3403.0271.23
Schurter Ag's 3403.0271.23 fuse has a rated current of 0.5A and a rated AC voltage of 277V, with dimensions of 15.4mm x 5.35mm x 5.35mm. It is a time lag electric fuse suitable for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms, meeting standards like CUL, UL, VDE.
BK-MDL-5-R
The Eaton BK-MDL-5-R fuse is a 5A, 250V electric fuse with time delay blow characteristic. With a rated breaking capacity of 200A and nominal joule integral of 32J, it's ideal for inline mounting in various applications requiring circuit protection. Compliant with CE, CSA, and UL standards, it comes in a compact size of 6.4x31.7mm for efficient use.
AJT125EI
Mersen S A
Mersen S A's AJT125EI fuse, rated 125A and 600V AC/500V DC, features time delay blow characteristic. With 200kA breaking capacity, it is an electric fuse with TAB/BLADE terminals for inline mounting. UL certified, it suits applications requiring high current circuit protection in various industries.
FNQ-R-1/2
Eaton Corporation's FNQ-R-1/2 fuse, rated at 600V and 0.5A, features time delay blow characteristic. With a rated breaking capacity of 200kA, it is used for electric circuit protection in various applications. Measuring 10.3mm x 38.1mm, it has nickel terminal finish and can be mounted inline or in a holder.
142.5631.6122
Littelfuse 142.5631.6122 fuse has a rated current of 125A and nominal joule integral of 62500J, suitable for circuit protection with a rated voltage of 58V. Its compact dimensions (12mm x 7.8mm x 16mm) make it ideal for inline mounting applications in various electronic devices.
ATDR2-1/2
ATDR2-1/2 by Mersen S A is a 600V, 2.5A time delay fuse with 200kA breaking capacity. It has a body size of 10.4mm x 38.1mm and end cap terminals, suitable for electric circuit protection in various applications requiring inline mounting or holder setups according to CSA and UL standards.
MST160MA250V
SPC TECHNOLOGY/ MULTICOMP
MST160MA250V fuse by Spc Technology/ Multicomp is a 250V slow blow electric fuse with a rated current of 0.16A and nominal joule integral of 0.1331J. It has dimensions of 8.35mm x 4.3mm x 7.7mm, making it suitable for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 20ms.
PTS120660V005
Eaton Corporation's PTS120660V005 fuse has a trip time of 1.5s, rated voltage of 60V, and resistance of 50Ω. It is used for electric circuit protection in applications requiring fast blow characteristic and surface mounting feature.
LP-CC-15
Eaton Corporation LP-CC-15 fuse, rated 15A and 600V, features time delay blow characteristic. With dimensions of 10.3mm x 38.1mm, it is used for electric circuit protection in applications requiring a rated breaking capacity of 200000A. It conforms to CE, CSA, and UL standards for safe use.
37001600430
Littelfuse 37001600430 fuse, rated at 0.16A and 250V, with fast blow characteristic. Ideal for circuit protection in various applications due to its compact TR5 size and high breaking capacity of 35A. Operating temperature range from -40°C to 85°C makes it suitable for diverse environments.
LPJ-70SP
The Eaton LPJ-70SP fuse, rated at 70A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 28.6mm x 66.7mm, it is ideal for circuit protection in various applications like industrial machinery and electrical equipment. Compliant with CE, CSA, and UL standards, it offers high breaking capacity of 300kA.
028707.5PXCN
028707.5PXCN by Littelfuse is a 7.5A electric fuse with a trip time of 0.08s and a rated breaking capacity of 1000A. It is commonly used for circuit protection in applications such as inline holders, with a temperature range of -40 to 125°C.
FNQ-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 3.2 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
LPJ-150SP
Eaton Corporation's LPJ-150SP fuse, rated at 150A and 600V AC/DC, features a J class with time delay blow characteristic. Measuring 41.4mm x 76.2mm, it is designed for electric circuit protection in various applications, meeting CE, CSA, and UL standards. Suitable for inline mounting with TAB/BLADE terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GMA-1.5-R
Eaton
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
Bel Fuse
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved