Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; MIL Conformity: NO; Shell Material: BRASS;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Bristol Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Atlantic Semiconductor
Prism Electronics
Advanced Electronics
$12.921
$11.758
$10.595
Perfect Parts
Telecom & Datacom Connectors 1-6605833-1 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Bel Fuse
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Gender:
Contact Pattern:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Polarization Key:
Shell Finish:
Shell Material:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
1-6605833-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
Microchip Technology
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
5749069-7
TE Connectivity 5749069-7 is a Telecom & Datacom Connector with 68 contacts, 0.05" pitch, and EMI shielding. It has a temperature range of -55 to 105°C and insulation resistance of 1G ohm. Ideal for telecom applications requiring high reliability and signal currents up to 1A.
2169890001
Molex
The Molex 2169890001 USB connector has a body size of 0.148" x 0.352" x 0.573", with gold termination finish. It is a right angle receptacle type, suitable for telecom & datacom applications. With UL 94V-0 flammability rating and 10000 cycle durability, it offers reliable performance in temperatures ranging from -40°C to 85°C.
67503-1230
The Molex 67503-1230 USB connector features a body length of 0.303", insulation resistance of 100M ohm, and dielectric voltage rating of 100VAC. Ideal for telecom/datacom applications, it offers a durable design with GLASS FILLED NYLON insulator material and TIN termination finish. With a total of 5 contacts, this right-angle receptacle has a surface mount termination type and is rated for commercial reliability.
UX60A-MB-5ST
Hirose Electric
The Hirose Electric UX60A-MB-5ST is a Telecom & Datacom Connector with 5 contacts, rated for 1A signal current. Featuring a 0.39" body length and 0.156" width, it has an insulation resistance of 100M ohm. Ideal for board mounting applications in telecom and datacom systems, this connector offers durability up to 5000 cycles at temperatures ranging from -30°C to 75°C.
87520-0010BLF
Amphenol Communications Solutions
The Amphenol Communications Solutions 87520-0010BLF is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1Gohm, suitable for telecom applications. With a durable design lasting up to 1500 cycles, it offers reliable performance in temperatures ranging from -40°C to 85°C.
47151-1002
The Molex 47151-1002 is a telecom and datacom connector with a body length of 0.591", width of 0.243", and depth of 0.478". It has an insulation resistance of 10MΩ, dielectric voltage withstand of 300VAC, and a contact finish of Sn/Bi. This connector is commonly used in board mounting applications for telecommunications and data communication systems.
1734035-2
TE Connectivity USB Connector 1734035-2 features Matte Tin finish, Glass Filled Polyamide9T insulator, and Stainless Steel shell. Ideal for telecom/datacom applications with 1A signal current rating, UL Flammability Code 94V-0, and right angle mounting style. Operating temperature range -40 to 85°C ensures reliability in commercial settings.
48409-0003
Molex 48409-0003 USB connector with gold nickel finish, glass-filled polyethylene insulator, and solderable retention clips. Ideal for telecom & datacom applications due to its 2+2 rows loaded design, straight board mounting option, and durability of 5000 cycles. Rated for commercial reliability with a signal current of 1.8A and operating temperatures from -20°C to 85°C.
XP1001000-05R
Lantronix
The Lantronix XP1001000-05R is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and right angle mounting style. It has a temperature range of -40 to 85°C. Ideal for commercial applications requiring reliable board-mounted connectors.
5557969-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 8; Mounting Style: STRAIGHT; PCB Contact Pattern: STAGGERED;
47589-1001
The Molex 47589-1001 is a USB connector with 5 contacts and a surface mount termination type. It has an insulation resistance of 1GΩ, dielectric withstand voltage of 100VAC, and can operate in temperatures ranging from -30°C to 85°C. This connector is commonly used in telecom and datacom applications due to its durability (10k cycles) and commercial reliability.
615006138421
Wuerth Elektronik & Kg
615006138421 by Wurth Elektronik is a Telecom & Datacom Connector with 6 contacts, rated at 1.5A signal current. It features gold over nickel termination finish, polybutylene terephthalate insulator material, and staggered PCB contact pattern. Ideal for telecom and datacom applications with a durability of 500 cycles and operating temperatures ranging from -25 to 85°C.
USB-RS232-WE-1800-BT_5.0
USB-RS232-WE-1800-BT_5.0 by FTDI is a USB connector with 4 contacts, male gender, and plug body style. It features a filter, cable assembly option, and is suitable for Telecom & Datacom applications.
935
Keystone Electronics
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
446200002
Molex 446200002 is a telecom & datacom connector with 0.645" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting with split board lock option, it features black insulator color and brass shell material. Suitable for commercial applications requiring reliable signal transmission at -40 to 70°C.
2086581051
Molex 2086581051 is a Telecom & Datacom Connector with Liquid Crystal Polymer insulator. Featuring 19 contacts, it has a body size of 0.59" x 0.244" x 0.478". Ideal for board and panel mounting applications, it offers a max operating temperature of 85°C and durability of 10k cycles.
2169900003
TELECOM AND DATACOM CONNECTOR;
ZX62RD-AB-5P8(30)
ZX62RD-AB-5P8(30) by Hirose Electric is a USB connector with 5 gold contacts, liquid crystal polymer insulator, and stainless steel shell. It is used in telecom/datacom applications for surface mount on boards/panels due to its UL 94V-0 flammability rating and right-angle mounting style.
RJHSE-5080-04
Amphenol
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
2171760001
Molex 2171760001 USB connector features 0.419" body length, 100000000 ohm insulation resistance, and 141VAC dielectric voltage. Ideal for telecom/datacom applications with black insulator, 6 contacts, and 1.25A signal current rating. Supports -40 to 85°C temperature range and offers surface mount termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Bel Fuse
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved