Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse's 0ZCM0001FF2G is a PTC resettable fuse with resistance of 15 ohm, operating voltage of 60V, and max circuit DC voltage of 60V. It is used in automotive applications due to AEC-Q200 compliance, with dual-ended terminal placement and surface mounting type for easy installation.
Median Price
$0.157
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.210
100+ parts
$0.136
1k+ parts
$0.095
10k+ parts
$0.072
DigiKey
$0.250
$0.146
$0.112
-
Verical
$0.116
Master Electronics
$0.070
Newark
Greenchips
$0.074
$0.071
$0.068
$0.061
TME
$0.200
$0.122
$0.090
$0.084
ComSIT Distribution GmbH
Vyrian
Chip Stock
Electro Sonic
IBS Electronics
$0.099
SIE Connect GmbH - GreenChips
VNN
Elcom Components
Advanced Electronics
$0.025
$0.023
$0.020
Aztec Data Supply Inc.
$0.100
Argo Parts USA
$0.107
$0.104
Netroflash
$0.118
Modulus Dynamics
$0.117
$0.113
Continental Prestige Electronics
$0.174
$0.131
Abacus Technologies
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Dual ended terminal placement allows for easy installation and connection, providing versatility and convenience in various applications.
TR packing method with 7 inch reel ensures efficient handling and storage, making it ideal for high volume production or automated assembly processes.
A resistance of 15 ohms is suitable for a wide range of circuit protection and current regulation applications.
Surface mount technology package style offers space-saving and efficient placement on PCBs, enhancing the overall design and layout of electronic devices.
With a maximum operating temperature of 85°C, this product can withstand high temperature environments, ensuring reliability and durability.
Matte tin terminal finish provides good solderability and electrical conductivity, promoting a reliable and stable connection in electronic circuits.
PTC resettable fuse type offers overcurrent protection and automatic reset functionality, adding safety and reliability to the circuit.
With an operating voltage of 60 volts, this product is suitable for applications requiring moderate voltage protection or regulation.
Compliance with multiple reference standards such as AEC-Q200, CUL, TUV, and UL ensures high quality, performance, and safety of the product.
Non-linear Resistors 0ZCM0001FF2G attributes and parameters. Explore more Non-linear Resistors devices from Bel Fuse
Additional Features:
Maximum Circuit DC Voltage:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Operating Voltage:
0ZCM0001FF2G Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Bytesonic Electronics
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MICROSMD150F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; Width (Package): 2.8 mm; Shape (Package): RECTANGULAR PACKAGE;
ASMD030F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .98 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; No. of Terminals: 2;
B72650M0131K072
TDK
B72650M0131K072 by TDK is a non-linear resistor with a max energy absorbing capacity of 4.2 J. It is a metal oxide film varistor that can operate at temperatures ranging from -40 to 85 °C. This surface mount varistor has a max circuit RMS voltage of 130 V and is commonly used for surge protection in electronic devices.
TRF250-180U
TE Connectivity
TE Connectivity's TRF250-180U is a PTC resettable fuse with 100V URac and 1.5W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement and disk package shape for through-hole mounting at up to 85°C.
LVR075S-240
TE Connectivity's LVR075S-240 is a PTC resettable fuse with resistance of 0.316 ohm and max circuit voltage of 240V. Ideal for temperature sensing applications, it operates b/w -40 to 85°C. Featuring radial terminal placement, it is CSA, TUV, and UL certified.
2920L075DR
2920L075DR by Littelfuse is a PTC resettable fuse with resistance of 0.35 ohm and operating voltage of 30V. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
B57364S0100M000
TDK B57364S0100M000 is a NTC thermistor with 10 ohm resistance, 20% tolerance, and 5.1 W power dissipation. It is used for overcurrent protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -55 to 170 °C.
MF-R090-2
Bourns
Bourns MF-R090-2 is a PTC resettable fuse with resistance of 0.14 ohm, operating voltage of 60V, and temperature range from -40 to 85°C. It has radial terminal placement, wire-shaped terminals, and disk package shape. Ideal for applications requiring overcurrent protection in electronic circuits.
S20K275
Herrmann Kg
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial; Maximum Circuit RMS Voltage: 275 V; Terminal Finish: Tin/Lead (Sn/Pb); Operating Voltage: 350 V;
NTCS0805E3103FLT
Vishay Intertechnology's NTCS0805E3103FLT is a 10000 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3430 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, this SMT thermistor features dual-ended terminals in a rectangular package.
B72210-S400-K101
B72210-S400-K101 by TDK is a VARISTOR with 40V max RMS voltage and 6.4J energy absorption capacity. It has radial terminal placement, wire terminals, and operates b/w -40°C to 85°C. Ideal for applications requiring protection against voltage surges in bulk packaging.
0805L010YR
0805L010YR by Littelfuse is a PTC resettable fuse with 1 ohm resistance, dual-ended terminals, and SMT package style. It is used for overcurrent protection in various applications. With dimensions of 2.2mm x 1.5mm x 1mm and operating voltage up to 15V, it ensures reliable performance in a compact form factor.
V430CH8
General Electric Solid State
VARISTOR; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .25 W; Length (Package): 8 mm; Package Style (Meter): SMT; Maximum Energy Absorbing Capacity: 23 J;
PTCCL13H921DBE
Vishay Intertechnology PTCCL13H921DBE is a PTC thermistor with resistance of 0.9 ohm, rated AC voltage of 30 V, and tolerance of 20%. It is used for overload protection in applications requiring radial terminal placement and disk package shape. Operating temperatures range from -40°C to 175°C.
NTCS0805E3472FMT
Vishay Intertechnology's NTCS0805E3472FMT is a 4700 ohm NTC thermistor with 1% tolerance. It has a thermal sensitivity index of 3500 K and operates b/w -40 to 150 °C. Ideal for temperature sensing applications, this surface mount thermistor features dual-ended terminals in a rectangular package.
PTCCL05H390HBE
Vishay Intertechnology's PTCCL05H390HBE is a PTC thermistor with 260 ohm resistance, rated for 265V AC voltage. Ideal for overload protection applications, it has radial terminal placement and disk package shape. Operating temperature ranges from -25°C to 125°C, with matte tin over nickel terminal finish.
B59955C0120A070
The TDK B59955C0120A070 is a PTC thermistor with resistance of 0.8 ohm, rated for 30V AC/DC. It is used for overcurrent protection in radial disk package, operating b/w -40°C to 125°C. Ideal for through-hole mounting applications requiring high temperature tolerance and strip pack packaging.
TMOV14RP275E
TMOV14RP275E by Littelfuse is a VARISTOR with 275V max circuit RMS voltage and 110J energy absorption. It operates b/w -55°C to 125°C, ideal for SURGE PROTECTION in various applications. Featuring METAL OXIDE FILM tech, it has radial terminal placement and measures 17mm in height and length, with a width of 9.5mm.
NANOSMDC016F-2
TE Connectivity's NANOSMDC016F-2 is a PTC thermistor with 5 ohm resistance and 0.5 W power dissipation. It features dual-ended terminals, rated for 10 V AC voltage, ideal for overload protection applications. This surface-mount device has a rectangular package and operates up to 85°C temperature.
B57321V2103J060
B57321V2103J060 by TDK is a NTC thermistor with 10000 ohm resistance and 5% tolerance. It is used for temperature compensation applications, with a thermal sensitivity index of 3980 K. This surface mount device has a max operating temperature of 125°C and min of -55°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0ZCM0003FF2G
Bel Fuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 6 ohm; Maximum Operating Temperature: 85 Cel; Maximum Circuit DC Voltage: 30 V; Length (Package): 1.8 mm;
0ZCM0002FF2G
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 12 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .85 mm; Minimum Operating Temperature: -40 Cel;
0ZCM0010FF2G
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .9 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; No. of Terminals: 2;
0ZCM0005FF2G
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 3.8 ohm; Maximum Operating Temperature: 85 Cel; Reference Standard: AEC-Q200; CUL; TUV; UL; No. of Terminals: 2;
0ZCM0020FF2G
Bel Fuse's 0ZCM0020FF2G is a PTC resettable fuse with a resistance of 0.55 ohm. It has dual-ended terminal placement and is suitable for surface mount applications. With a max operating temperature of 85 °C, it meets AEC-Q200, CUL, TUV, and UL standards.
0ZCM0008FF2G
Bel Fuse's 0ZCM0008FF2G is a PTC resettable fuse with a resistance of 2.8 ohm and operating voltage of 15V. It is designed for surface mount applications, with dual-ended terminal placement and a package style of SMT. Suitable for use in automotive electronics, it meets AEC-Q200, CUL, TUV, and UL standards.
0ZCM0012FF2G
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.1 ohm; Maximum Operating Temperature: 85 Cel; Terminal Shape: WRAPAROUND; Maximum Circuit DC Voltage: 9 V;
0ZCM0016FF2G
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Height (Package): .75 mm;
0ZCM0008FA2G
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 2.8 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Reference Standard: AEC-Q200; CUL, UL;
0ZCM0004FF2G
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 4 ohm; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved