Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse 0697-1250-01 is a MICRO fuse with 1.25A rated current and 250V AC voltage. With time lag blow characteristic, it offers circuit protection in various applications like consumer electronics and industrial equipment. This BULK-packed fuse has dimensions of 8.35mm x 4mm x 7.7mm for through-hole mounting, meeting CCC, CUL, PSE, SEMKO, UL, VDE standards.
Median Price
$0.348
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Avnet
1+ parts
$0.216
100+ parts
$0.188
1k+ parts
-
10k+ parts
DigiKey
$0.480
$0.313
$0.213
$0.185
Nova Conductors
Vyrian
VNN
TME
$0.411
$0.273
Continental Prestige Electronics
$0.212
$0.208
Argo Parts USA
$0.206
Netroflash
$0.209
Ampacity Inc.
$0.400
Aztec Data Supply Inc.
$6.381
Authorized Procurement Solutions
Perfect Parts
This fuse has a high Nominal Joule Integral, providing excellent protection against power surges and spikes.
The high Rated AC Voltage ensures that this fuse can be used in a wide range of applications without the risk of electrical failure.
The compact Body Length/Diameter makes this fuse suitable for installations where space is limited.
With a low Rated Current, this fuse is ideal for protecting low-power circuits and devices.
The TIME LAG blow characteristic of this fuse ensures that it can withstand temporary overloads without blowing unnecessarily.
With a low Minimum Operating Temperature, this fuse can perform reliably even in extreme cold conditions.
The high Maximum Operating Temperature of this fuse ensures that it can withstand high temperatures without degrading performance.
The THROUGH HOLE mounting feature makes installation of this fuse easy and secure in a variety of applications.
Fuses 0697-1250-01 attributes and parameters. Explore more Fuses devices from Bel Fuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0697-1250-01 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Taitron Components
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LKN-100
Cooper Electronic Technologies
ELECTRIC FUSE;
FNQ-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP; Terminal Finish: NICKEL;
0251004.MXL
Littelfuse
Littelfuse 0251004.MXL PICO fuse with 4A current, 125V DC/AC rated voltage, and 2.45J joule integral. Very fast blow characteristic for electric circuit protection in various applications. Dimensions of 2.8mm x 7.11mm make it suitable for through-hole mounting in electronics.
LP-CC-2
Eaton Corporation
Eaton Corporation LP-CC-2 fuse, rated 2A and 600V AC/300V DC, with time delay blow characteristic. Inline/holder mounting for circuit protection in CE/CSA/UL standard applications. Dimensions: 10mm x 38.1mm body size with end cap terminal shape.
LPJ-200SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE;
0481.500H
Littelfuse 0481.500H fuse with 0.5A rated current, 125V AC/DC voltage, and fast blow characteristic. Ideal for circuit protection in applications requiring a compact size (17.8mm x 8mm x 19.6mm) and high breaking capacity of 40A. Compliant with CSA and UL standards, suitable for use in alarm systems or indicators due to built-in features.
FNQ-R-3/4
Eaton Corporation's FNQ-R-3/4 fuse, rated at 600V AC, features a 0.75A current and time delay blow characteristic. With nickel terminal finish and 200kA breaking capacity, it is ideal for electric circuit protection in various applications. Measuring 10.3mm x 38.1mm, this CC-class fuse is commonly used in inline or holder mounting setups.
ANN-500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE;
0468001.NR
Littelfuse 0468001.NR fuse, rated at 63V and 1A, with trip time of 0.0015s. Ideal for circuit protection in electronics due to slow blow characteristic and compact size of 3.18mm x 1.52mm x 0.58mm. Compliant with CSA and UL standards for reliable performance in various applications.
LP-CC-1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
FWS-10A20FI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1400 V; Rated DC Voltage: 1000 V; Rated Current: 10 A; Terminal Shape: END CAP;
LP-CC-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.1 A; Terminal Shape: END CAP;
35NHG000B
The Eaton Corporation 35NHG000B fuse is rated at 35A and has a breaking capacity of 120kA. With a nominal joule integral of 2400J and rated AC voltage of 500V, it provides reliable circuit protection. This fuse, with CE, DIN, IEC, VDE standards compliance, is suitable for electric applications requiring inline mounting.
02170.05HXP
Littelfuse 02170.05HXP fuse, rated at 0.05A and 250V, offers fast blow characteristic with trip time of 0.003s. Ideal for circuit protection in applications requiring 250V AC voltage protection. Measuring 5x20mm, it has a rated breaking capacity of 35A and operates b/w -55°C to 125°C.
0297030WXNV
0297030WXNV by Littelfuse is a 30A electric fuse with dimensions of 10.9mm x 3.8mm x 8.8mm and a max operating temperature of 125°C. It is commonly used for circuit protection in applications such as inline or holder mounting.
AJT50
Mersen S A
AJT50 fuse by Mersen S A is a 50A time delay electric fuse with a rated AC voltage of 700V and rated DC voltage of 400V. With dimensions of 27mm x 60mm, it features an end cap terminal shape and inline/holder mounting for circuit protection applications requiring a high breaking capacity of 200000A.
PTS120624V020
Eaton Corporation's PTS120624V020 fuse, with 0.2A rated current and 24V rated voltage, has a fast blow characteristic. It is a surface mount type electric fuse with TUV and UL reference standards, ideal for circuit protection in various applications.
C1Q3
Bel Fuse
Bel Fuse C1Q3 is a 1206-sized fuse with rated voltage of 125V and current of 3A. It has a very fast blow characteristic, suitable for circuit protection in applications requiring surface mount fuses. The fuse has a rated breaking capacity of 100A and operates b/w -55°C to 125°C temperatures.
35421000029
Littelfuse 35421000029 fuse has a rated current of 10A, nominal joule integral of 500J, and rated AC voltage of 440V. It is used for circuit protection in applications requiring very fast blow characteristic and inline/holder mounting feature.
DMM-B-44/100
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1000 V; Rated DC Voltage: 1000 V; Rated Current: .44 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0697-0315-01
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: PIN WIRE; Reference Standard: CCC; CUL; SEMKO; UL; VDE;
0697A5000-01
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 5 A; Terminal Shape: PIN WIRE;
0697-0100-01
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .1 A; Terminal Shape: PIN WIRE; Packing Method: BULK;
0697-3150-01
Bel Fuse 0697-3150-01 is a MICRO fuse with 3.15A rated current and 250V AC voltage. With a nominal joule integral of 58J, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuse with through hole mounting feature.
0697A3150-01
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 3.15 A; Terminal Shape: PIN WIRE;
0697A5000-05
Bel Fuse's 0697A5000-05 is a MICRO fuse with a rated current of 5A and max operating temperature of 125°C. It offers circuit protection, has a blow characteristic of time lag, and is suitable for through-hole mounting in various applications.
0697A1000-01
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 1 A; Terminal Shape: PIN WIRE;
0697-2000-02
Bel Fuse 0697-2000-02 is a MICRO fuse with 2A rated current and 250V AC voltage. With a nominal joule integral of 23J, it offers time lag blow characteristic for circuit protection. Ideal for applications requiring electric fuses in compact spaces, it has dimensions of 8.35mm x 4mm x 7.7mm and matte tin terminal finish.
0697A2000-02
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated DC Voltage: 63 V; Rated Current: 2 A; Terminal Shape: PIN WIRE;
0697-0080-02
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: PIN WIRE; Terminal Finish: MATTE TIN;
0697A2500-01
Bel Fuse 0697A2500-01 is a MICRO fuse with 2.5A rated current and 45J nominal joule integral. It operates at -55 to 125 °C, suitable for electric circuit protection in various applications like consumer electronics and industrial equipment.
0697-0125-01
Bel Fuse 0697-0125-01 is a MICRO fuse with 0.125A rated current and 250V AC voltage. Featuring time lag blow characteristic, it offers circuit protection in various applications. With dimensions of 8.35mm x 4mm x 7.7mm, it is suitable for use in electronics requiring electric fuse protection.
0697-0500-02
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: PIN WIRE; Fuse Size: MICRO;
0697-1250-02
Bel Fuse 0697-1250-02 is a MICRO fuse with 1.25A rated current and 250V AC voltage. With dimensions of 8.35mm x 4mm x 7.7mm, it has a time lag blow characteristic suitable for electric circuit protection applications at temperatures ranging from -55°C to 125°C.
0697W4000-02
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated DC Voltage: 72 V; Rated Current: 4 A; Terminal Shape: PIN WIRE;
0697-0080-01
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: PIN WIRE; Minimum Operating Temperature: -55 Cel;
0697A2000-05
Bel Fuse 0697A2000-05 is a MICRO fuse with 2A rated current and 250V AC voltage. With a time lag blow characteristic, it offers circuit protection in various applications like consumer electronics and industrial equipment. This fuse has dimensions of 8.35mm x 4mm x 7.8mm and meets standards such as CCC, CQC, UL, and VDE for reliable performance.
0697-0125-02
Bel Fuse 0697-0125-02 is a MICRO fuse with 0.125A rated current and 250V AC voltage. Featuring time lag blow characteristic, it offers circuit protection with a rated breaking capacity of 35A. Ideal for applications requiring electric fuse in compact dimensions of 8.35mm x 4mm x 7.7mm.
0697-0315-05
0697-1250-05
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1.25 A; Terminal Shape: PIN WIRE; Body Length/Diameter: 8.35 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved