Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FLASH PLD; Grading Of Temperature: MILITARY; Form Of Terminal: NO LEAD; No. of Terminals: 28; Package Code: QCCN; Package Shape: SQUARE;
Median Price
$82.100
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
< 1k
Master Electronics
1+ parts
$143.640
100+ parts
$104.860
1k+ parts
-
10k+ parts
Arrow
$81.270
$78.860
Verical
Nova Conductors
$76.434
Digiode
$95.798
Vyrian
VNN
Bristol Electronics
Aztec Data Supply Inc.
$66.170
Ampacity Inc.
$70.140
Corohmni
$72.368
Continental Prestige Electronics
$74.905
Vigor
$85.540
Corphita
$90.756
Semicontronic
$152.660
$148.844
$148.080
Microchip USA
$163.020
iodParts Technologies Inc.
Authorized Procurement Solutions
Fulton Briggs Corp.
Supply Digital
Argo Parts USA
Perfect Parts
Programmable Logic Devices (PLD) ATF22V10C-10NM/883 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Atmel
Programmable IC Type:
Organization:
No. of Outputs:
Output Function:
No. of Inputs:
No. of Product Terms:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Technology:
Architecture:
Sub-Category:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies (V):
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Package Equivalence Code:
Width:
Length:
Maximum Seated Height:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
JESD-30 Code:
Qualified:
Screening Level:
ATF22V10C-10NM/883 Programmable ICs trade compliance attributes, and parameters.
ECCN
3A001.A.2.C
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Atmel Corporation was a creator and manufacturer of semiconductors before being subsumed by Microchip Technology in 2016. Atmel was founded in 1984. The company focused on embedded systems built around microcontrollers
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Silicon Transistor
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
ATF16V8CZ-15XU
Microchip Technology
ATF16V8CZ-15XU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, ideal for PAL-type applications. Featuring 64 product terms and 8 I/O lines, it operates b/w -40 to 85°C with a clock frequency of up to 45MHz. This flash PLD in a small outline package is surface mountable and has industrial-grade temperature grading.
ATF22V10C-10XU
Atmel
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
ISPLSI1048E-70LQN
Lattice Semiconductor
ISPLSI1048E-70LQN by Lattice Semiconductor is a PLD with 192 macro cells, 96 I/O lines, and 18.5 ns propagation delay. It is used for applications requiring in-system programmability, such as digital signal processing and control systems. The device operates at temperatures ranging from 0 to 70°C and has a max clock frequency of 56 MHz.
XC2C256-7CPG132I
Xilinx
The Xilinx XC2C256-7CPG132I is a 256 macrocell FLASH PLD with 106 I/O lines, operating at max frequency of 108 MHz. It features a propagation delay of 7.5 ns and can be in-system programmable. Ideal for industrial applications requiring high-speed processing and versatile I/O capabilities in a compact GRID ARRAY package.
XCR3128XL-10VQG100I
Xilinx XCR3128XL-10VQG100I is a 128 macrocell EE PLD with 84 I/O lines. It operates at max clock frequency of 95 MHz, with propagation delay of 10 ns. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
ATF16LV8C-10JU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
EPM7256SRI208-10
Altera
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 208; Package Code: FQFP; Package Shape: SQUARE;
5M80ZE64A5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE;
XC2C384-10TQG144C
XC2C384-10TQG144C by Xilinx is a 384 macrocell FLASH PLD with 118 I/O lines, operating at 83 MHz. It features a propagation delay of 10 ns and can be used for applications requiring in-system programmability and JTAG boundary scan testing.
EPM1270GT144C4N
The Altera EPM1270GT144C4N is a programmable logic device with 980 macro cells, CMOS technology, and a propagation delay of 8.1 ns. It can operate at a maximum supply voltage of 1.89V and has a package shape of square. This PLD is commonly used for applications requiring in-system programmability and output functions like macrocell.
XC2C256-7VQG100I
The Xilinx XC2C256-7VQG100I is a 256 macrocell programmable logic device with 80 inputs/outputs, operating at a max clock frequency of 108 MHz. It features a propagation delay of 7.5 ns and is suitable for applications requiring in-system programmability and JTAG boundary scan testing in industrial environments.
ATF1504AS-10JU44-T
ATF1504AS-10JU44-T by Microchip Technology is a 32 I/O EE PLD with 10 ns propagation delay, suitable for industrial applications. It operates at a voltage range of 4.5V to 5.5V and supports a max clock frequency of 125 MHz. This square chip carrier package with J bend terminals is surface mountable and has an operating temperature range from -40°C to 85°C.
5M570ZF256I5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE;
5M240ZT100I5N
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
EPM570T100C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
5M570ZT100C4N
Intel
Intel's 5M570ZT100C4N is a PLD with 440 macro cells, 9.5ns propagation delay, and 184.1MHz max clock frequency. Ideal for applications requiring in-system programmability, such as high-speed digital designs or signal processing systems.
XCR3064XL-10VQG44I
Xilinx XCR3064XL-10VQG44I is a 64 macrocell EE PLD with 36 I/O lines, operating at max 95 MHz. It has a propagation delay of 10 ns and can handle supply voltages from 2.7 V to 3.6 V. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
ATF22V10C-7SX
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
EPM3032ATC44-4
EPM3032ATC44-4 by Intel is a 32 macrocell EE PLD with 4.5 ns propagation delay and 227.3 MHz max clock frequency. Ideal for applications requiring in-system programmability, it operates at a max temp of 70°C with a supply voltage range of 3-3.6 V, featuring JTAG boundary scan test capability.
EPM1270F256A5N
The EPM1270F256A5N by Altera is a programmable logic device with 980 macro cells. It has a maximum supply voltage of 2.625V and operates on CMOS technology. Its package is BGA256, measures 17mm in length and width, and has a bottom position of terminals. It is surface mountable and in-system programmable. The EPM1270F256A5N has a propagation delay of 10ns and an output function of macrocell. It is suitable for applications that require flash PLD functionality and can operate at 3.3V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATF22V10C-15PU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
ATF22V10C-15PU by Microchip Technology is a 5.5V CMOS PLD with 15ns propagation delay, ideal for PAL-type applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 55.5MHz in industrial settings. With a compact rectangular package style and through-hole terminals, it's suitable for various programmable logic tasks.
ATF22V10CQZ-20PU
ATF22V10CQZ-20PU by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, ideal for PAL-type applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 38.5MHz in industrial settings. With a rectangular package shape and through-hole terminals, it is designed for efficient programmable logic solutions.
ATF22V10C-10JU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
ATF22V10C-10JU by Microchip Technology is a 5V CMOS PLD with 10ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 90MHz. This flash PLD in a chip carrier package is ideal for PAL-type architecture designs requiring fast processing speeds.
ATF22V10C-10PU
ATF22V10C-10PU by Microchip Technology is a 5.5V CMOS PLD with 10ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a max clock frequency of 90MHz and includes 132 product terms for versatile programming options. With a rectangular package shape and through-hole terminals, this flash PLD is ideal for PAL-type architecture designs requiring fast processing speeds.
ATF22V10C-15JU
ATF22V10CQZ-20SU
FLASH PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
ATF22V10CQZ-20SU by Microchip Technology is a 5.5V CMOS PLD with 20ns propagation delay, suitable for industrial applications. Featuring 22 inputs and 10 I/O lines, it offers a clock frequency of up to 38.5MHz in a small outline package style for efficient integration into electronic systems.
ATF22V10CQ-15JU
Microchip's ATF22V10CQ-15JU is a 5.5V CMOS PLD with 15ns propagation delay, featuring 22 inputs and 10 I/O lines. Ideal for industrial applications, it offers a max clock frequency of 55.5MHz and supports up to 132 product terms in a square chip carrier package.
ATF22V10C-7PX
FLASH PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: THROUGH-HOLE; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR;
ATF22V10C-10XU by Microchip Technology is a programmable logic device (PLD) with 22 inputs and 10 outputs. It has a propagation delay of 10 ns and operates at a max clock frequency of 90 MHz. This PLD is commonly used in industrial applications requiring high-speed data processing.
ATF22V10CQZ-20JU
ATF22V10CQZ-20JU by Microchip: 20ns Propagation Delay, 5.5V Max Supply Voltage, CMOS Tech. Ideal for PAL-TYPE applications with 22 inputs, 10 I/O lines, and a max clock frequency of 38.5MHz in industrial settings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved