Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AU-Y1006-3 by Assmann Wsw Components is a USB connector with 9 contacts, featuring TIN over nickel termination finish and gold mating contact finish. Made of glass-filled liquid crystal polymer insulator material, it is ideal for telecom & datacom applications requiring surface mount board mounting in a right-angle style.
Median Price
$1.664
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
$2.390
100+ parts
$1.722
1k+ parts
$1.464
10k+ parts
$1.372
Verical
-
$4.030
$3.848
$2.041
Arrow
$0.937
Chip1Stop
$0.846
Nova Conductors
Vyrian
VNN
Electro Sonic
$1.520
$1.030
IBS Electronics
$1.404
Prism Electronics
Inventory MP
Bristol Electronics
Argo Parts USA
Continental Prestige Electronics
$0.919
AZTECH Wire
$1.830
$1.760
$1.720
$1.690
Aztec Data Supply Inc.
$5.230
Authorized Procurement Solutions
Provides excellent conductivity and corrosion resistance, ensuring a reliable connection.
Offers high strength and temperature resistance, making the connector durable and suitable for various environments.
Widely used and standardized interface for connecting devices, ensuring compatibility and ease of use.
Provides good electrical conductivity and durability for long-lasting performance.
Meets strict flammability standards for safety and reliability.
Enhances conductivity and reduces signal loss for improved performance.
Provides sufficient connections for various applications and devices.
Allows for easy and secure installation on electronic circuit boards.
Durable and resistant to wear, ensuring the longevity of the connector.
Facilitates easy and reliable soldering to the circuit board for a secure connection.
Designed to mate with male connectors, ensuring compatibility with a wide range of devices.
Provides flexibility in installation and saves space in compact electronic devices.
Telecom & Datacom Connectors AU-Y1006-3 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Assmann Wsw Components
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
Option:
Shell Material:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
AU-Y1006-3 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
The ASSMANN WSW Group is well known as a global system provider for standard and customer-tailored connectors, cable assemblies, heat sinks and assembly services. The ASSMANN WSW Group has more than 50 years of experience in the electromechanical and the thermal management market. The products are available internationally through a global distribution network. The products of the ASSMANN WSW Group are used in both the industrial and automotive sectors. The BCS Group GmbH, as 100% owner of the ASSMANN WSW Group, has mainly produced cable assemblies and lighting technology for the automotive industry since 1993.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NXP Semiconductors
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Eic Semiconductor
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
12401610E4#2A
Amphenol
The Amphenol 12401610E4#2A is a telecom & datacom connector with dimensions of 0.361" x 0.129" x 0.413". It features 24 contacts, rated for 5A signal current, UL94V-0 flammability. This female USB connector has a right-angle mounting style and surface mount termination, suitable for board applications.
1-2007394-5
TE Connectivity 1-2007394-5 is a Telecom & Datacom Connector with 8 ports, 160 contacts, and UL 94V-0 flammability rating. It operates b/w -55°C to 105°C, suitable for board mounting applications requiring press fit termination at 0.118" terminal length.
PCR-E20FS
Honda Tsushin Kogyo
PCR-E20FS by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" pitch, suitable for commercial applications. Featuring a dielectric voltage of 500VAC and insulation resistance of 1Gohm, it has a nickel finish, solder termination, and can handle up to 1A signal current. Ideal for use in telecommunications and data communication systems.
AU-Y1007-R
Assmann Wsw Components
AU-Y1007-R by Assmann Wsw Components is a USB connector with 4 contacts, rated at 1.5A signal current. It features a nickel shell finish, solderable retention clips for board mounting, and a polarization key for easy assembly. Ideal for telecom & datacom applications due to its durability of 1500 cycles and commercial reliability.
690-005-299-043
Edac
USB CONNECTOR; Contact Material: PHOSPHOR BRONZE/COPPER ALLOY; Mating Contact Finish: GOLD FLASH OVER NICKEL; Termination Contact Finish: NOT APPLICABLE;
5787394-7
TE Connectivity 5787394-7 is a telecom & datacom connector with 68 contacts, 0.05" mating pitch, and EMI shielding. Ideal for board mounting applications in commercial settings with operating temperatures from -55°C to 105°C.
5-2301996-1
TE Connectivity 5-2301996-1 is a telecom & datacom connector with EMI shielding, liquid crystal polymer insulator, and nickel-plated brass shell. It has 8 contacts, operates b/w -40 to 85°C, and supports board mounting. Ideal for applications requiring high-speed data transmission in telecommunications and data communication systems.
1734099-7
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: PHOSPHOR BRONZE; Insulator Material: LIQUID CRYSTAL POLYMER; Filter Feature: NO;
47654-0001
Molex
Molex 47654-0001 USB connector features gold termination, liquid crystal polymer insulator, and stainless steel shell. Ideal for telecom & datacom applications requiring female contact gender in cable mounting receptacle design.
5552740-1
TE Connectivity's 5552740-1 is a Telecom & Datacom Connector with 24 contacts, 0.085" mating pitch, and 105°C max operating temp. Ideal for board mounting applications in telecom and datacom systems due to its female contact gender, right angle receptacle body style, and solder termination type.
10132328-10011LF
Amphenol Communications Solutions
Amphenol's 10132328-10011LF USB connector features 24 contacts, POLYETHYLENE insulation, and NICKEL shell finish. With a rated current of 5A, it is ideal for telecom & datacom applications. This female connector has a durability of 10k cycles and operates b/w -55 to 85°C.
6-641337-3
TELECOM AND DATACOM CONNECTOR; Contact Gender: MALE; Mixed Contacts: NO; IEC Conformity: NO; DIN Conformance: NO; Body or Shell Style: PLUG;
2500.0010.0
TELECOM AND DATACOM CONNECTOR;
54819-0572
54819-0572 by Molex is a USB connector with a body length of 0.303", width of 0.156", and depth of 0.354". It is used in telecom & datacom applications, has a surface mount termination type, and can withstand temperatures from -20 to 85°C.
SS-7188S-A-NF-K1
Bel Fuse
Bel Fuse SS-7188S-A-NF-K1 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and COPPER ALLOY shell material. Featuring 8 contacts in a polarized housing, it is ideal for board mounting with staggered PCB contact pattern at 2.54mm pitch for right-angle mounting applications.
67068-9000
Molex 67068-9000 USB connector with 4 contacts, rated at 1.5A signal current, features glass-filled polyester insulation and solderable retention clips for board mounting. With a dielectric voltage of 750VAC, it is ideal for telecom & datacom applications requiring durable connectors with right-angle mounting style and polarized housing key.
10118193-0001LF
Amphenol's 10118193-0001LF USB connector features gold flash over nickel termination, liquid crystal polymer insulator, and matte tin shell finish. With a rated current of 1.8A, it is ideal for telecom & datacom applications requiring high durability and reliability in board mounting setups.
UE86-3G4420-60361
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: UE86-3G4420;
6339191-1
TE Connectivity 6339191-1 is a Telecom & Datacom Connector with EMI shielding, LCP insulator, and 8 contacts. It has a temperature range of -40 to 85°C and UL94V-0 flammability rating. Ideal for board mounting in telecom applications due to its durability and polarization key feature.
1735284-2
TE Connectivity 1735284-2 is a Telecom & Datacom Connector with POLYETHYLENE insulator, 30u plating thickness, and 22 contacts. It operates b/w -40 to 85°C, suitable for telecom applications requiring a rated current of 1.5A. The connector features a polarized key, UL flammability rating of 94V-0, and surface mount termination.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Mounting Style: RIGHT ANGLE;
AU-Y1005-2-R
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Polarization Key: POLARIZED HOUSING;
AU-Y1006-R
TELECOM AND DATACOM CONNECTOR; Manufacturer Series: AU-Y;
AU-Y1005-R
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE;
AU-Y1007
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; Mating Contact Finish: NOT SPECIFIED; Mounting Option-1: LOCKING;
AU-Y1005-2
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Resistance: 30 mohm; Board Mounting Option: COMPLIANT BOARDLOCK;
AU-Y1005
AU-Y1005 by Assmann Wsw Components is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 500VAC and insulation resistance of 1Gohm, suitable for telecom/datacom applications. With a durable design lasting 1500 cycles, it has a temperature range from -55 to 85°C and UL flammability rating of 94V-0.
AU-Y1005-3
USB CONNECTOR; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
AU-Y1005-3-R
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; No. of Connectors: ONE; Contact Material: NOT SPECIFIED;
AU-Y1006
AU-Y1006 USB connector by Assmann Wsw Components features a body length of 0.57", insulation resistance of 1G ohm, and dielectric voltage of 500VAC. Ideal for telecom applications, this right-angle receptacle has a black insulator color, surface mount termination, and durability of 1500 cycles.
AU-Y1006-2
AU-Y1006-2-R
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Contact Resistance: 30 mohm;
AU-Y1006-3-R
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE; Mounting Option-1: LOCKING;
AU-Y1007-3
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 100VAC; Minimum Operating Temperature: -55 Cel; Insulator Color: BLUE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved