Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TELECOM AND DATACOM CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; Board Mounting Option: SPLIT BOARD LOCK; Body Width: .657 inch;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Telecom & Datacom Connectors A-2014-2-4-N-R attributes and parameters. Explore more Telecom & Datacom Connectors devices from Assmann Wsw Components
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
A-2014-2-4-N-R Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
The ASSMANN WSW Group is well known as a global system provider for standard and customer-tailored connectors, cable assemblies, heat sinks and assembly services. The ASSMANN WSW Group has more than 50 years of experience in the electromechanical and the thermal management market. The products are available internationally through a global distribution network. The products of the ASSMANN WSW Group are used in both the industrial and automotive sectors. The BCS Group GmbH, as 100% owner of the ASSMANN WSW Group, has mainly produced cable assemblies and lighting technology for the automotive industry since 1993.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
Bytesonic Electronics
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
Transistor & Electronic
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAT54C-7-F
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
Cheng-yi Electronic
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
RC0805FR-0710KL
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
5555165-5
TE Connectivity
TE Connectivity 5555165-5 is a telecom & datacom connector with 0.528" body length, 0.5" width, and PBT-POLYESTER insulator. It has 500M ohm insulation resistance, tin finish with Ni barrier, and operates b/w -40 to 85°C. Ideal for board mounting applications in commercial settings.
5557786-1
Tyco Electronics Amp
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: PCT-POLYESTER; Contact Style: TELCOM, MODULAR; No. of Ports: 1;
954
Keystone Electronics
USB CONNECTOR;
67643-3911
Molex
Molex 67643-3911 USB connector features 4 contacts, with matte tin finish and glass-filled polyamide insulation. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The right-angle receptacle has a solder termination type and operates b/w -40 to 85°C.
UJ31-CH-3-MSMT-TR-67
Cui
Cui's UJ31-CH-3-MSMT-TR-67 USB connector features 24 contacts, POLYAMIDE46 insulator, and NICKEL shell finish. Ideal for telecom/datacom applications with a 100VAC dielectric voltage, -40 to 80°C operating range, and UL94V-0 flammability rating. Suitable for board mounting with a right-angle design and locking option for durability up to 10k cycles.
74355-1042LF
AMPHENOL ICC
Amphenol Icc's 74355-1042LF is a Telecom & Datacom Connector with 8 contacts. Features include Nickel Palladium Gold termination, Polyethylene insulator, and Gold/Gold Flash mating finish. Ideal for board mounting in telecom and datacom applications due to its right angle male contact gender.
1300478009
TELECOM AND DATACOM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
2171780001
TELECOM AND DATACOM CONNECTOR;
MP1010RX-1000K
Kycon
Kycon's MP1010RX-1000K is a Telecom & Datacom Connector with 10 contacts, rated at 1.5A signal current. It features a dielectric voltage of 1400VAC, insulation resistance of 500M ohm, and contact material made of copper alloy. Ideal for wire and stranded cable connections in commercial applications with operating temperatures ranging from -55 to 85°C.
5787617-4
TE Connectivity USB connector 5787617-4 with POLYETHYLENE insulator, rated for 1A signal current. Features solderable retention clips for board mounting, UL 94V-0 flammability code. Ideal for telecom/datacom applications due to right angle mounting style and commercial reliability.
7499011212A
Wuerth Elektronik & Kg
7499011212A by Wurth Elektronik is a Telecom & Datacom Connector with Filter Feature, Polyethylene Insulator, and Nickel Shell Finish. It has 8 contacts, Copper Alloy shell material, and Solder termination type. Ideal for board mounting in applications requiring right angle mounting style.
5025780600
The Molex 5025780600 is a Telecom & Datacom Connector with 0.059" mating contact pitch, 0.524" body length, and 0.24" body width. It features POLYBUTYLENE TEREPHTHALATE insulator material and is used in commercial applications for crimp termination on cables.
1827525-1
TE Connectivity 1827525-1 is a PLASTIC telecom connector with NICKEL finish. It has 4 contacts, rated for 1A signal current, and can withstand temperatures from -55 to 85 °C. Ideal for telecom & datacom applications requiring durable connectors with straight cable mounting.
SI-52008-F
Bel Fuse
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
47346-0001
The Molex 47346-0001 is a USB connector with a body length of 0.307", body width of 0.116", and termination contact finish of GOLD. It is commonly used in telecom and datacom applications, offering a durable design with 10,000 cycles and a right-angle mounting style.
292303-4
TE Connectivity's 292303-4 is a Telecom & Datacom Connector with 0.575" body length, POLYETHYLENE insulator, and 1000000000 ohm insulation resistance. Ideal for board mounting with solderable retention clips, it operates b/w -55 to 85 °C and has a durability of 1500 cycles.
PCR-E20FS+
Honda Tsushin Kogyo
PCR-E20FS+ by Honda Tsushin Kogyo is a 20-contact telecom/datacom connector with 0.05" mating pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and NICKEL shell finish. Ideal for commercial applications requiring a reliable female contact style with solder termination on a rectangular pattern.
2171750001
1-406541-5
TELECOM AND DATACOM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .64 inch; MIL Conformity: NO; PCB Contact Row Spacing (mm): 1.78;
ZX80-B-5SA(30)
Hirose Electric
ZX80-B-5SA(30) by Hirose Electric is a USB connector with 5 contacts, gold termination finish, and liquid crystal polymer insulator. It is used in telecom/datacom applications for board mounting, featuring a stainless steel shell and surface mount termination. The connector has UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Assmann Wsw Components
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved