Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -30 Cel; Configuration: SINGLE; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .05 A;
Median Price
$1.360
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.920
100+ parts
-
1k+ parts
10k+ parts
RS Americas
$1.770
$1.420
Mouser Electronics
$1.810
$1.370
$1.280
$1.180
DigiKey
$1.438
Newark
$2.100
TTI Europe
$1.113
$0.951
$0.875
Verical
$1.339
Arrow
$1.335
TTI
$1.240
Master Electronics
$1.380
$1.250
$1.130
Distrelec
Greenchips
$1.006
$0.958
$0.912
$0.823
Nova Conductors
$1.190
TME
$1.630
$1.330
VNN
Electro Sonic
$1.112
$0.955
$0.901
IBS Electronics
$1.515
$1.641
NAC Semi
$2.170
$2.000
Vyrian
SIE Connect GmbH - GreenChips
Corel Iberica Componentes, S.L.
Aztec Data Supply Inc.
$0.223
Advanced Electronics
$0.248
$0.226
$0.203
Argo Parts USA
Netroflash
$1.131
$1.107
Corohmni
$1.235
Allen Electronics Distributors
Semicontronic
$2.060
$2.008
$1.998
Continental Prestige Electronics
$2.300
$1.800
Kepictronics
Alle Elektronik GmbH
Glotronic Ltd.
Authorized Procurement Solutions
Assy Fe
Perfect Parts
iodParts Technologies Inc.
Solid State Relays AQH3223 attributes and parameters. Explore more Solid State Relays devices from Aromat
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Isolation Voltage:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Packing Method:
AQH3223 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
PCN Design/Specification - Mult Devs Brand/Safety Marking 17/Nov/2021
PCN Assembly/Origin - AQH series Country of Origin Chg 19/NOV/2019
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sangdest Microelectronics (Nanjing)
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
ASO241-R
Sensata Technologies
ASO241-R by Sensata Technologies is a SINGLE configuration TRIGGER OUTPUT SSR with SCR output circuit. It has a max forward current of 0.015 A and can handle up to 1.5 A on-state current. Ideal for DC input applications, it offers 2500 V isolation voltage and operates b/w -30°C to 80°C temperatures.
ODC5
Potter & Brumfield
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Input Type: DC; Maximum Operating Temperature: 80 Cel; Output Circuit Type: Triac; Control Voltage: 2.5 V;
D2425-10
Crydom
Crydom's D2425-10 is a complex solid state relay with trigger output SSR. It has a max on-state current of 25A, control voltage of 3V, and isolation voltage of 4000V. Ideal for DC input applications in temperatures ranging from -40°C to 80°C.
CPC2025NTR
Ixys Integrated Circuits Division
TRANSISTOR OUTPUT SSR; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Control Voltage: .9 V; Input Type: DC; Length: 9.3 mm;
OAC5
Schneider Electric Sa
Schneider Electric Sa's OAC5 is a Solid State Relay with Triac output circuit type, 5V DC control voltage, and -30 to 80°C operating temperature range. At 31.7mm height and 43.1mm length, it's ideal for industrial automation, HVAC systems, and lighting controls due to its compact size and reliable performance.
A1225
Hbcontrols
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Length: 58.4 mm; Maximum Isolation Voltage: 4000 V; Minimum Operating Temperature: -40 Cel; Output Circuit Type: Back to Back SCR;
HS501DR-D2425
TRIGGER OUTPUT SSR; Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum On State Current: 10 A; No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel;
AQY210EHAZ
Aromat
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Height: 3.2 mm; Output Circuit Type: MOSFET; Control Voltage: 1.14 V;
D2450
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; No. of Elements: 1; Maximum Isolation Voltage: 4000 V; Maximum Forward Current: .012 A; Length: 57.3 mm;
G3VM-61ER1(TR)
Omron
Omron's G3VM-61ER1(TR) is a DC input SSR with MOSFET output circuit. It has max on-state current of 3A, on-state resistance of 0.07 ohm, and isolation voltage of 2500V. Ideal for surface mount applications in temperature range -20 to 65°C.
LH1518AABTR
Telefunken Microelectronics
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Length: 8.7 mm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Control Current: .0008 A;
TLP3406SRL(TP,E
Toshiba
TRANSISTOR OUTPUT SSR;
D2440DE-10
TRIGGER OUTPUT SSR; No. of Elements: 2; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; Maximum Operating Temperature: 80 Cel; Maximum On State Current: 40 A; Additional Features: UL APPROVED, VDE APPROVED;
D2450-10
The Crydom D2450-10 is a solid state relay with a complex configuration and trigger output. It has a max on-state current of 50A, control voltage of 3V, and max isolation voltage of 4000V. Ideal for applications requiring precise control in industrial automation systems.
AQY221FN2VY
Panasonic
Panasonic AQY221FN2VY is a SINGLE Solid State Relay with 0.12A On State Current, 12.5 ohm On State Resistance, and 500V Isolation Voltage. Ideal for optoelectronic applications with TRANSISTOR OUTPUT SSR type, operating b/w -40 to 85 °C temperature range.
TLP176AM(TPL,E
Toshiba's TLP176AM(TPL,E is a solid state relay with 0.0195A max forward current, 2 ohm max on-state resistance, and 3750V max isolation voltage. Ideal for applications requiring single diode configuration and transistor output SSR in temperatures ranging from -20°C to 85°C.
CPC1965Y
IXYS Corporation
TRIGGER OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Input Type: AC; Control Current: .01 A; Height: 6.35 mm; Maximum On State Current: 1 A;
LH1512BACTR
Vishay Semiconductors
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum On State Resistance: 15 ohm; Maximum Isolation Voltage: 3750 V; Additional Features: UL RECOGNIZED;
AQH3223AX
AQH3223AX by Panasonic is a SINGLE configuration TRIGGER OUTPUT SSR with 0.05A max forward current. It operates b/w -30°C to 85°C, offering 5000V isolation voltage. Ideal for applications requiring reliable solid state relay performance in various temperature conditions.
HS103DR-D53TP50D
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -40 Cel; Maximum On State Current: 55 A; No. of Elements: 1; Additional Features: UL RECOGNIZED, VDE APPROVED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AQH3213AX
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -30 Cel; Configuration: SINGLE; Additional Features: UL RECOGNIZED, WITH ZERO CROSS OVER CIRCUIT; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 85 Cel;
AQH3213AX by Panasonic is a SINGLE Solid State Relay with 0.05A Max Forward Current and 5000V Max Isolation Voltage. Ideal for TRIGGER OUTPUT SSR applications, it operates b/w -30°C to 85°C temperature range.
AQH3213A
TRIGGER OUTPUT SSR; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .05 A; Minimum Operating Temperature: -30 Cel; Maximum Isolation Voltage: 5000 V;
TRIGGER OUTPUT SSR; Configuration: SINGLE; No. of Elements: 1; Maximum Forward Current: .05 A; Minimum Operating Temperature: -30 Cel; Packing Method: TUBE;
AQH3213AZ
TRIGGER OUTPUT SSR; No. of Elements: 1; Packing Method: TR; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Maximum Forward Current: .05 A;
The Panasonic AQH3213AZ is a SINGLE Solid State Relay with 0.05A Max Forward Current and 5000V Max Isolation Voltage. It is an Optoelectronic TRIGGER OUTPUT SSR suitable for applications requiring -30 to 85 °C operating temperatures, such as industrial automation and control systems.
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 5000 V; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .05 A; Packing Method: TR; No. of Elements: 1;
TRIGGER OUTPUT SSR; Configuration: SINGLE; No. of Elements: 1; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel; Packing Method: TR;
AQH3213
TRIGGER OUTPUT SSR; Configuration: SINGLE; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE; Additional Features: UL RECOGNIZED, VDE APPROVED, ZERO VOLTAGE CROSSING;
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE; Maximum Forward Current: .02 A; Additional Features: UL RECOGNIZED, VDE APPROVED, ZERO VOLTAGE CROSSING; Maximum Isolation Voltage: 5000 V;
AQH3223A
Panasonic AQH3223A is a SINGLE Solid State Relay with 0.05 A max forward current. It features 5000 V max isolation voltage and TRIGGER OUTPUT SSR optoelectronic type. Ideal for applications requiring -30 to 85 °C operating temperature range.
TRIGGER OUTPUT SSR; Packing Method: TUBE; No. of Elements: 1; Maximum Forward Current: .05 A; Additional Features: UL RECOGNIZED; Minimum Operating Temperature: -30 Cel;
AQH3223AZ
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 5000 V; Additional Features: UL RECOGNIZED; Maximum Forward Current: .05 A; Packing Method: TR; No. of Elements: 1;
TRIGGER OUTPUT SSR; Maximum Isolation Voltage: 5000 V; Configuration: SINGLE; Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Maximum Forward Current: .05 A;
AQH3223
TRIGGER OUTPUT SSR; Maximum Forward Current: .05 A; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Additional Features: UL RECOGNIZED; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved