Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED RESISTOR; Resistance: 10 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 1 %; Width (Package): 47.5 mm; Terminal Finish: Silver (Ag);
Median Price
$8.257
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$7.820
100+ parts
$4.140
1k+ parts
-
10k+ parts
RS Americas
$8.940
$6.710
Element14
$11.980
$9.710
$8.540
Master Electronics
$7.390
$5.150
$4.880
Verical
$8.694
$7.788
Distrelec
Arrow
$6.504
$6.211
Nova Conductors
$7.599
IBS Electronics
$9.607
$6.695
$6.344
Vyrian
Electro Sonic
$7.120
$4.990
$4.780
Semtec, LLC
DigiKey Marketplace
R&J Components
Semicontronic
$5.780
$5.636
$5.607
Continental Prestige Electronics
$7.447
Allen Electronics Distributors
$9.420
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Argo Parts USA
Netroflash
$7.219
$7.067
Fixed Resistors HS10010RF attributes and parameters. Explore more Fixed Resistors devices from Arcol Uk
Construction:
JESD-609 Code:
No. of Terminals:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Series:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Tolerance:
Operating Voltage:
HS10010RF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.29.00.00
SB
Ohmite Manufacturing Company headquartered in Chicago Illinois, a wholly owned subsidiary of Heico Company, LLC, has acquired ARCOL UK Ltd of Truro, England. The acquisition solidifies Ohmite’s global presence in the power resistors market and establishes a manufacturing presence in Europe upon which to grow. Ohmite’s President Greg Pace says of the acquisition, “The combination of ARCOL’s excellent power resistor product line and their reputation for quality complements Ohmite’s global offering. ARCOL is particularly strong in aluminum housed wirewound resistors which is consistent with our customer base and our selling strategy. The strengths of our two organizations working together will benefit our mutual customers and Distributors for decades to come.” ARCOL UK Ltd, founded in the 1952, was acquired by Mike Pritchard and Alun Morgan in 1992 and has grown by offering outstanding quality products and on-time delivery. Former owner Mike Pritchard says, “This is a very nice fit for ARCOL and its employees, distributors and customers. The combined product lines, and distribution channels will result in sustained growth for Ohmite. We are pleased to be selling to such a fine organization and we are proud of what ARCOL has accomplished.” Ohmite Manufacturing Company is a provider of resistive products for high current, sensing, high voltage, and high energy applications. The company’s full complement of resistor constructions includes wirewound, wire element, thick film, and ceramic composition. Ohmite maintains operations in South Texas, Mexico, England and the Chicago area. Heico Company, LLC is headquartered in Chicago; Illinois is a diversified manufacturing company.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Sensitron Semiconductor
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Eic Semiconductor
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
SPC TECHNOLOGY/ MULTICOMP
MP915-2.00-1%
Caddock Electronics
MP915-2.00-1% by Caddock Electronics is a 2 ohm fixed resistor with 1% tolerance, rated for 15W power dissipation and operating voltage of 200V. It features METAL GLAZE/THICK FILM technology, -55 to 150 °C temperature range, and -20,80 ppm/°C temp coef. Ideal for applications requiring precise resistance values in electronic circuits.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
CRCW0805100KFKEA
Vishay Intertechnology's CRCW0805100KFKEA is a fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and operating voltage of 150 V.
RC0603FR-131KL
Yageo's RC0603FR-131KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and wide operating temperature range from -55 to 155 °C.
RC0603FR-072.2RL
Yageo's RC0603FR-072.2RL is a 2.2 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.1W and operating voltage of 50V, it operates b/w -55°C to 155°C making it ideal for various electronic circuits requiring precise resistance values in compact spaces.
RC0603FR-074K7
Thunder Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 4700 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
ERJ8RQFR27V
Panasonic
ERJ8RQFR27V by Panasonic is a fixed resistor with a resistance of 0.27 ohm and a tolerance of 1%. It operates b/w -55 to 155 °C, making it suitable for various applications in automotive electronics due to its AEC-Q200 reference standard compliance and surface mount package style. With a rated power dissipation of 0.25 W, this rectangular package resistor is ideal for high-temperature environments requiring precise resistance values.
CRCW0402330RFKED
Vishay Intertechnology's CRCW0402330RFKED is a 330 ohm fixed resistor with 1% tolerance and 0.063 W power dissipation. Ideal for surface mount applications, it operates b/w -55 to 155 °C, making it suitable for various electronic circuits requiring precise resistance values. The metal glaze/thick film technology ensures stable performance in automotive and industrial electronics.
RC0603FR-07150RL
Yageo's RC0603FR-07150RL is a 150 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.1W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C making it ideal for various electronic circuits. The rectangular package style and matte tin terminal finish ensure reliable performance in diverse environments.
CRCW040210R0FKED
Vishay Intertechnology's CRCW040210R0FKED is a 10 ohm fixed resistor with 1% tolerance and 100 ppm/°C temperature coefficient. Ideal for surface mount applications, it operates b/w -55 to 155 °C, making it suitable for automotive electronics due to AEC-Q200 compliance.
RK73Z2BTTD
RK73Z2BTTD by Koa Speer Electronics is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. With a metal glaze/thick film technology and rectangular construction, it has a temperature range of -55 to 155 °C. Ideal for AEC-Q200 and IEC60115-8 compliant automotive electronics.
RK73H1JTTD1003F
RK73H1JTTD1003F by Koa Speer Electronics is a fixed resistor with a resistance of 100000 ohm and a tolerance of 1%. It has a max operating temperature of 155 °C and is commonly used in surface mount applications.
Yageo's RC0603FR-074K7 is a 4700 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. It operates b/w -55 to 155 °C and has a power dissipation of 0.1 W. Ideal for applications requiring precise resistance values in compact electronic devices.
RC0402FR-07150KL
Yageo's RC0402FR-07150KL is a fixed resistor with 150000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its SMT package style and operating voltage of 50 V. Operating temperature range from -55 to 155 °C makes it versatile for various electronic devices.
CRCW06030000Z0EB
Vishay Intertechnology's CRCW06030000Z0EB is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it's ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and 0.1 W power dissipation.
CRCW08054K70FKEAHP
Vishay Intertechnology's CRCW08054K70FKEAHP is a fixed resistor with 4700 ohm resistance, 1% tolerance, and 0.5 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating temperature range of -55 to 155 °C.
CRCW08051K00FKEAC
Vishay Intertechnology's CRCW08051K00FKEAC is a 1000 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it suitable for surface mount applications in various electronic circuits.
CRCW06032K00FKEAHP
Vishay Intertechnology's CRCW06032K00FKEAHP is a fixed resistor with 2000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 °C to 155 °C efficiently.
ERJ6ENF1001V
Panasonic ERJ6ENF1001V is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and temperature range of -55 to 155 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HS1002RF
Arcol Uk
FIXED RESISTOR; Resistance: 2 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 1 %; JESD-609 Code: e4; Length (Package): 65.2 mm;
Ohmite Manufacturing
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 2 ohm; Rated Power Dissipation (P): 100 W; Maximum Operating Temperature: 200 Cel; Tolerance: 1 %;
HS1001KJ
FIXED RESISTOR; Resistance: 1000 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 5 %; Operating Voltage: 1900 V; Construction: Aluminum Housing;
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): 100 W; Maximum Operating Temperature: 200 Cel; Tolerance: 5 %;
HS100100RJ
FIXED RESISTOR; Resistance: 100 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 5 %; Package Style (Meter): Chassis Mount; Terminal Finish: Silver (Ag);
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 100 ohm; Rated Power Dissipation (P): 100 W; Maximum Operating Temperature: 200 Cel; Tolerance: 5 %;
HS1010RF
FIXED RESISTOR; Resistance: 10 ohm; Rated Power Dissipation (P): 10 W; Tolerance: 1 %; Reference Standard: MIL-R-18546; Size Code: 6365;
Ohmite Manufacturing's HS1010RF is a 10 ohm, 1% tolerance fixed wire wound resistor with 10W power dissipation. It operates at temperatures up to 200°C and has a silver terminal finish. Ideal for chassis mount applications requiring high precision resistance in electronic circuits.
HS10010RF
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 100 W; Maximum Operating Temperature: 200 Cel; Tolerance: 1 %;
HS100R22J
FIXED RESISTOR; Resistance: .22 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 5 %; Temperature Coef (ppm/Cel): 100; Width (Package): 47.5 mm;
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: .22 ohm; Rated Power Dissipation (P): 100 W; Maximum Operating Temperature: 200 Cel; Tolerance: 5 %;
HS100100RF
FIXED RESISTOR; Resistance: 100 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 1 %; Temperature Coef (ppm/Cel): 100; Series: HS;
Ohmite Manufacturing's HS100100RF is a 100 ohm fixed resistor with a rated power dissipation of 100W. It is commonly used in chassis mount applications and can operate at temperatures up to 200°C.
HS1004R7J
FIXED RESISTOR; Resistance: 4.7 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 5 %; Technology: WIRE WOUND; No. of Terminals: 2;
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 4.7 ohm; Rated Power Dissipation (P): 100 W; Maximum Operating Temperature: 200 Cel; Tolerance: 5 %;
HS1004RF
The Ohmite HS1004RF is a 4 ohm fixed resistor with a rated power dissipation of 100W. It has a max operating temperature of 200°C and can be mounted on a chassis. This resistor is commonly used in applications requiring high power dissipation and resistance stability.
HS100560RF
FIXED RESISTOR; Resistance: 560 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 1 %; Reference Standard: MIL-R-18546; Operating Voltage: 1900 V;
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 560 ohm; Rated Power Dissipation (P): 100 W; Maximum Operating Temperature: 200 Cel; Tolerance: 1 %;
HS100F1R0E
FIXED RESISTOR; Mounting Type: CHASSIS MOUNT; Resistance: 1 ohm; Rated Power Dissipation (P): 100 W; Maximum Operating Temperature: 275 Cel; Tolerance: 1 %;
HS100107RF
FIXED RESISTOR; Resistance: 107 ohm; Rated Power Dissipation (P): 100 W; Tolerance: 1 %; JESD-609 Code: e4; Length (Package): 65.2 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved