Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Perfect Parts
1+ parts
100+ parts
1k+ parts
10k+ parts
Combination Line Connectors 15344092 attributes and parameters. Explore more Combination Line Connectors devices from Aptiv
Connector Type:
15344092 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Aptiv's signal and power solutions segment supplies components and systems that make up a vehicle's electrical system backbone, including wiring assemblies and harnesses, connectors, electrical centers, and hybrid electrical systems. The advanced safety and user experience segment provides body controls, infotainment and connectivity systems, passive and active safety electronics, advanced driver-assist technologies, and displays, as well as the development of software for these systems. Aptiv's largest customer is General Motors at roughly 12% of 2021 revenue, including sales to GM's Shanghai joint venture, followed by Stellantis at 11%, and Volkswagen at 9%. North America and Europe represented approximately 38% and 33% of total 2019 revenue, respectively.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Onsemi
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Goodwork Semiconductor
Transys Electronics
12010717
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
DTP04-2P-EE01
TE Connectivity
TE Connectivity's DTP04-2P-EE01 is a 2.364" x 0.872" x 0.848" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A signal current. It operates b/w -55°C to 125°C, UL certified with polarization key for male contacts. Ideal for cable mounting applications requiring a polarized receptacle with strain relief.
DT06-12SB-CE13
TE Connectivity's DT06-12SB-CE13 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style with strain relief option.
DT06-12SB-CE01
The TE Connectivity DT06-12SB-CE01 is a Combination Line Connector with 12 contacts, rated for 250V and 13A. It features GLASS FILLED POLYAMIDE insulator material, UL 94V-0 flammability code, and operates in temperatures from -55 to 125°C. Ideal for cable mounting applications requiring a polarized female plug connector with strain relief option.
ATM06-2S
Amphenol
The Amphenol ATM06-2S is a combination line connector with dimensions of 0.472" x 0.638" x 1.091". It has an operating temperature range of -55°C to 125°C and can handle a rated current of 7.5A, making it suitable for cable mounting applications requiring a female plug connector with round pin/socket contacts.
194190021
Molex
The Molex 194190021 is a COMBINATION LINE CONNECTOR with 16 contacts, suitable for CABLE mounting and CRIMP termination. It features a MALE contact gender and PLUG body style. Ideal for various applications requiring reliable connectivity in industrial settings.
33472-2001
Molex 33472-2001 is a 20-contact combination line connector with 2 loaded rows. It features female contacts, cable mounting, and crimp termination. Ideal for applications requiring receptacle connectors in various industries.
9-966140-5
TE Connectivity 9-966140-5 is a Combination Line Connector with dimensions of 1.024" x 0.791". Rated at 24V, it operates b/w -40 to 100°C. Ideal for applications requiring a male connector with 6 contacts and solder termination in a panel-mounted, right-angle configuration.
DT04-3P-EP10
TE Connectivity's DT04-3P-EP10 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring crimp termination and UL flammability rating of 94V-0.
DT06-12SB-P012
TE Connectivity's DT06-12SB-P012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125°C, and can handle up to 13A current. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
DT06-08SA-CE11
TE Connectivity's DT06-08SA-CE11 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. With a body size of 1.267" x 0.872" x 1.465", it is ideal for cable mounting applications requiring a polarized, UL-certified connector.
DT06-12SA-CE13
TE Connectivity's DT06-12SA-CE13 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-certified connector with strain relief mounting on cables.
934451101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Body or Shell Style: PLUG; Filter Feature: NO;
AT06-08SA
The Amphenol AT06-08SA is a 2-row combination line connector with 8 contacts, rated for 13A signal current. Its dimensions are 1.449" x 0.776" x 1.229", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic connections.
AT06-3S-SR01BLK
The Amphenol AT06-3S-SR01BLK is a combination line connector with 3 contacts, rated for 13A signal current. With a temperature range of -55 to 125°C, it features female contact gender and round pin/socket style. Ideal for cable mounting applications requiring reliable connectivity in compact spaces.
776164-1
TE Connectivity's 776164-1 is a POLYBUTYLENE TEREPHTHALATE Combination Line Connector with 35 contacts, rated at 17A. It operates b/w -40 to 125 °C and features UL Flammability Code of 94V-0. Ideal for applications requiring a polarized, crimped female plug with strain relief mounting option.
AT04-12PA-SRGRY
The Amphenol AT04-12PA-SRGRY is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this male receptacle connector features round pin sockets and compact dimensions of 1.598" x 0.874" x 2.476".
ATP06-2S-EC01
The Amphenol ATP06-2S-EC01 is a Combination Line Connector with POLYETHYLENE insulator, operating from -55 to 125°C. It has 2 contacts, rated at 25A for signal transmission. Ideal for cable mounting applications requiring crimp termination and female contact gender.
282088-1
TE Connectivity's 282088-1 is a Combination Line Connector with dimensions of 1.146" x 0.366" x 1.268". It has a rated voltage of 24V, GLASS FILLED POLYAMIDE insulator, and operates b/w -40°C to 125°C. Ideal for applications requiring a polarized housing, it offers a rated current of 14A and features a total of 4 contacts for cable mounting.
194330013
Molex 194330013 is a 0.935" long Combination Line Connector with 2 contacts, male gender, and crimp termination. It offers high insulation resistance of 20MOhm and low contact resistance of 30mOhm. Ideal for commercial applications with operating temperatures from -40 to 120°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Aptiv
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved