Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Aptiv's 12065298 is a COMBINATION LINE CONNECTOR with 4 FEMALE SQ PIN-SKT contacts. It features dimensions of 0.964" L x 0.791" W x 1.023" D, ideal for automotive applications requiring compact yet reliable connectivity.
Median Price
$1.311
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Power & Signal
1+ parts
$0.599
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.854
$0.612
$0.550
Newark
$1.420
$1.070
$0.775
$0.656
RS (Exports)
$1.550
$1.271
Element14
$1.920
$1.370
$1.090
$0.914
Mouser Electronics
$2.020
$1.100
$0.957
$0.823
Adafruit Industries
$10.802
$9.830
$8.858
TTI
$0.566
Master Electronics
$0.882
$0.569
$0.544
Verical
$1.202
$0.761
CustomConnectorKits
$1.750
$1.490
$1.280
Nova Conductors
$2.040
VNN
Vyrian
IBS Electronics
$1.551
$1.269
$1.074
Q Components
Kallista Electronics Ltd
A2Z Electronics, Inc.
EMSNET
Semicontronic
$0.510
$0.497
$0.495
Continental Prestige Electronics
$0.759
$0.744
Argo Parts USA
Corohmni
$1.532
Aztec Data Supply Inc.
$2.005
Netroflash
Advanced Electronics
Perfect Parts
EMSNET (Excess)
Assy Fe
Abacus Technologies
Authorized Procurement Solutions
Resion (Excess)
A compact body length makes this connector suitable for applications where space is limited and a smaller footprint is desired.
The narrow body width allows for easier installation in tight spaces or crowded equipment panels.
The moderate body depth provides a balance between compact size and sufficient depth for secure connection.
The versatile combination line connector allows for multiple types of connections in a single compact unit, offering flexibility in usage.
Having 4 contacts enables multiple connections to be made simultaneously, increasing the efficiency of the overall system.
The female contact gender is commonly used for receiving connections, ensuring compatibility with a variety of male connectors.
The square pin socket contact style provides a secure and reliable connection, minimizing the risk of disconnection or signal loss.
Combination Line Connectors 12065298 attributes and parameters. Explore more Combination Line Connectors devices from Aptiv
Body Width:
Body Depth:
Body Length:
Connector Type:
Contact Gender:
Contact Style:
Empty Shell:
Filter Feature:
Mixed Contacts:
Option:
Total No. of Contacts:
12065298 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
NSN
5935-01-571-6954, 5935015716954, 5935-01-647-1690, 5935016471690
NIIN
015716954, 016471690
Aptiv's signal and power solutions segment supplies components and systems that make up a vehicle's electrical system backbone, including wiring assemblies and harnesses, connectors, electrical centers, and hybrid electrical systems. The advanced safety and user experience segment provides body controls, infotainment and connectivity systems, passive and active safety electronics, advanced driver-assist technologies, and displays, as well as the development of software for these systems. Aptiv's largest customer is General Motors at roughly 12% of 2021 revenue, including sales to GM's Shanghai joint venture, followed by Stellantis at 11%, and Volkswagen at 9%. North America and Europe represented approximately 38% and 33% of total 2019 revenue, respectively.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
NXP Semiconductors
BSS138PS,115
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
350777-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Total No. of Contacts: 2; Insulator Material: POLYAMIDE;
1-480708-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-2; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Manufacturer Series: 480708;
DTP06-4S-E003
Amphenol
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -55 Cel; Additional Features: POALRIZED; Insulator Material: POLYETHYLENE;
AT06-08SA-KIT01
The Amphenol AT06-08SA-KIT01 is a Combination Line Connector with 8 contacts, rated at 13A signal current. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a body size of 1.449" x 0.776" x 1.279", making it suitable for various electronic systems.
770680-2
TE Connectivity
TE Connectivity's 770680-2 is a Combination Line Connector with dimensions of 1.866" x 1.323" x 1.362". Featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, it has 23 contacts and operates b/w -40°C to 125°C. Ideal for applications requiring a polarized, solder-type female connector with a rated current of 17A.
DTM04-08PA
TE Connectivity's DTM04-08PA is a 2-row, 8-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, male receptacle with strain relief.
DT06-3S-P032
TE Connectivity's DT06-3S-P032 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with crimp termination.
DT04-2P-CE02
TE Connectivity's DT04-2P-CE02 is a combination line connector with dimensions of 1.708" x 0.675" x 0.67". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications and has a max current rating of 13A.
ATM06-12SA-SR1GY
Amphenol's ATM06-12SA-SR1GY is a 2-row, 12-contact combination line connector with POLYETHYLENE insulator. It operates b/w -55°C to 125°C, handling up to 7.5A signal current. Ideal for cable mounting applications due to its compact dimensions of 1.76" x 0.701" x 1.563".
DTM13-12PA-12PB-R008
TE Connectivity's DTM13-12PA-12PB-R008 is a 24-contact combination line connector with plastic insulator material. It has a rated voltage of 250V, signal current rating of 7.5A, and operates b/w -55 to 125°C. Ideal for board mounting applications requiring a right angle receptacle design.
AT06-2S-LED2401
Amphenol's AT06-2S-LED2401 is a 2-contact combination line connector with POLYETHYLENE insulator. It operates b/w -55°C to 125°C, handling a rated current of 13A. Ideal for cable mounting applications, mating with AT06-2P-LED2401 plug connectors.
ATP06-4S-BLK
The Amphenol ATP06-4S-BLK is a Combination Line Connector with 2 rows, rated for 25A signal current. Made of Polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, featuring crimp termination and female contact gender.
929504-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Additional Features: COMPATIBLE CONTACTS: 927778-1; 927778-3; 927775-1; 926755-1; 926756-1; Filter Feature: NO;
12010996
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 1; Contact Material: NOT SPECIFIED; Empty Shell: YES;
DT06-4S-CE13
TE Connectivity's DT06-4S-CE13 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief option.
DT04-4P-CL03
TE Connectivity's DT04-4P-CL03 is a Combination Line Connector with 4 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL Flammability Code 94V-0, suitable for panel mounting.
DT04-4P-RT01
The TE Connectivity DT04-4P-RT01 is a combination line connector with 4 contacts, rated at 250V and 13A. It features GLASS FILLED POLYAMIDE insulator material, UL94V-0 flammability code, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized male connector with crimp termination and strain relief option.
3-1418390-1
TE Connectivity's 3-1418390-1 is a Combination Line Connector with dimensions of 1.693" x 1.012" x 1.23". Rated for 60V, it operates b/w -40°C to 140°C, ideal for cable mounting applications at up to 40A signal current.
AT06-2S-LED1201
Amphenol's AT06-2S-LED1201 is a female combination line connector with 2 contacts, rated at 13A. It has a compact body measuring 0.768" x 0.692" x 1.693", ideal for cable mounting applications. Mates with AT06-2P-LED1201 plug connectors, suitable for various signal transmission needs.
DT04-6P
The TE Connectivity DT04-6P is a combination line connector with 6 contacts, rated for 13A signal current and 250V voltage. Featuring nickel termination finish, glass-filled polyamide insulator, and UL94V-0 flammability code, it operates in temperatures from -55 to 125°C. Ideal for commercial applications requiring durable connectors with polarization key and strain relief mounting option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
12065287
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mixed Contacts: NO; DIN Conformance: NO;
Aptiv
Aptiv's 12065287 is a Combination Line Connector with TIN finish, POLYBUTYLENE TEREPHTHALATE insulator. Featuring 3 contacts, FEMALE gender, it is used for cable mounting applications in automotive industry.
12065425
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Body Length: 1.661 inch; Mounting Type: CABLE;
The Aptiv 12065425 is a Combination Line Connector with dimensions of 1.661" x 1.118" x 1.024". It features POLYAMIDE66 insulator material, 10 contacts, and female contact gender. This connector is used for cable mounting applications requiring crimp termination.
12065298
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Empty Shell: NO; Body Depth: 1.023 inch;
12065686
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Total No. of Contacts: 4; Insulator Material: POLYBUTYLENE TEREPHTHALATE;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 4; Contact Material: NOT SPECIFIED; Empty Shell: NO;
12065685
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Total No. of Contacts: 5; MIL Conformity: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Empty Shell: NO; Termination Contact Finish: NOT APPLICABLE;
12065402
Aptiv's 12065402 is a Combination Line Connector with dimensions of 0.964" x 0.791" x 1.023". It features 2 female SQ PIN-SKT contacts and is ideal for automotive applications.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: SQ PIN-SKT; Mating Contact Finish: NOT SPECIFIED; No. of Rows Loaded: 1;
12064763
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; MIL Conformity: NO; Mating Contact Pitch (inch): 0.138;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Empty Shell: YES; DIN Conformance: NO;
12066016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Total No. of Contacts: 2; DIN Conformance: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; MIL Conformity: NO;
12065172
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; MIL Conformity: NO; Total No. of Contacts: 1;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: 12065171; Mounting Type: CABLE; Empty Shell: NO;
12065171
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Total No. of Contacts: 1; MIL Conformity: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Contact Material: NOT SPECIFIED; Insulator Material: POLYAMIDE66;
12065662
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: 1.24 inch; Mixed Contacts: NO; Body Length: 1.368 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved